C# :: Unable To Continuously Read More Lines Of Text
Apr 23, 2014
This code works, but not fully This code reads com ports, when a string is available, I check to see if it contains some keywords defined in array If it does, i print out the string itself.
The problem i am having is that it seems to stop processing the data at some point but I do know that there are more strings to be read. So, it does keep reading more lines of data
using System;
using System.Text;
using System.Collections.Generic;
[Code]......
View 9 Replies
ADVERTISEMENT
May 31, 2013
I am trying to get text file and read only first 100 lines of the text content using c/c++. how can i do it?
is it something like string line;
getline(stream,line);
??
View 7 Replies
View Related
Jan 12, 2014
private void open(object sender, EventArgs e) {
OpenFileDialog openDialog = new OpenFileDialog();
if (openDialog.ShowDialog() == DialogResult.OK) {
string[] lines = File.ReadAllLines(openDialog.FileName);
int k = 0;
while (k < lines.Length)
[Code] ....
So in this code, the user basically opens a text file from the dialog. Then the file gets read on all the lines and gets stored in an array. Now the reason I did this is because there are more fields of text boxes I have to fill in after I fill in the table (6x3). I'm getting an out of bounds error however.
19
19
19
0
95
0
0
0
0
5
0
0
5
1
0
0
51
1
110
Warrior
This is a sample text file that is being used. As you can see all the lines from start up until (excluding "110") will be used in the table. Now I want to read the last lines in this text file and put it in another text box. How do I do that?
View 2 Replies
View Related
May 12, 2014
I am having trouble in reading data from my text file and print it out exactly like how it looks like in the text file. The problem im having is it will not read the last y Coordinates of the point. it keep reading the second last point for y coordinates which is wrong.
my text file is
0.0 0.0
0.0 1.0
1.0 0.0(but it read until here)
0.0 0.0(suppose to read the last point which is here)
For your information, this is my 1st year degree assignment in C programming. It is to create a program which can read text file (manually create) and print it out in a program and calculate the area for the polygon using ADT function ( .c and .h files)
*This is the code for my read file function*
Basically this accepts a Polygon and a file pointer as parameters. It reads the polygon point data from the file, pass the read data to plg_new() to create a new Polygon and returns the new Polygon created.
Code:
polygon *plg_read(polygon *New_polygon, FILE *Coord) {
int i;
int numberofvertices=0;
int count=0;
char filename[50];
double xCoor[50], yCoor[50];
[Code]....
This is the second function my polygon new code. This ADT function basically creates a new Polygon with malloc(), initialize all ADT data members with its parameter values and returns the Polygon.
Code:
polygon *plg_new(double *xCoordinates, double *yCoordinates, int numberOfVertices) {
int x;
polygon *New_poly = (polygon *)malloc(sizeof (polygon));
if(New_poly->xCoordinates == NULL || New_poly->yCoordinates == NULL) {
free(New_poly);
[Code]....
This is the rest of the code if you need to refer to other codings.
Code:
/**
*@file polygon.c
*@brief Functions for polygon / Struct has polygon numberOfVertices, polygon *xCoordinates and polygon *yCoordinates
*@author: Tan Xian Yao
*@id: 4323440
*@date: 22/04/2014
*/
[Code]...
View 6 Replies
View Related
Jan 25, 2013
I have a .txt file that contains, together with a few characters, columns of values that I want to save in different files like is written in the program (file 1, file2, file3 - a with x, b with y, c with z). The pattern of the source text file is like this:
known_vector frame1 151 65 0 frame2 151.000763 64.538582 0.563737
known_vector frame1 152 65 0 frame2 152.000702 64.542488 0.560822
known_vector frame1 153 65 0 frame2 153.000671 64.546150 0.558089
Until now I could manage to split the files, but the output gives me only zeros. First the program count the number of lines of the read text file, then it should display the desired columns of double values in three other .txt files.I've got for the three .txt files columns like this:
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
View 2 Replies
View Related
Aug 2, 2014
I have a text file called (Test.txt) with the following text:
This is line one
This is line two
This is line three
How do I go about writing a program that will print a line of text (e.g. "This in line two" on the console screen?
All I can seem to do is display the entire text file.
View 6 Replies
View Related
Oct 21, 2014
I am trying to read lines from a CSV file and put the values into vectors. The CSV contains a large amount of data and I would like the program to only read certain lines from the CSV into the vectors. An example of the data is below. In my code the user inputs a secid. I would then like the code to only read lines from the csv where the secid matches what the user inputs. The secid's are also not in order so I can't just use a while loop.
My current code is below the data.
secideffect_datecusip ticker
10131014MAY19972313510 AMZN
10131008MAY19982313510 AMZN
10131028NOV20002313510 AMZN
10131023JUL20012313510 AMZN
10196601JAN199663858510 NB
10196601OCT199806605F10 BAC
ifstream infile3("filepath.csv");
if (!infile3) {
cerr << "Couldn't open file!"<<endl;
return 1;
[Code] .....
View 1 Replies
View Related
Aug 22, 2014
I want to read certain lines from a file. Let say if the line contains word "makes", the line will be loaded on the screen.how to modify this code.
// reading a text file
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
int main () {
string line;
[Code] ....
View 1 Replies
View Related
Jan 2, 2015
My task is to write a function for borrowing books form library called borrow(name,surname, student_id, book_id), which will connect information of borrowed book's ID and student's information in the file.
File looks like this:
John Jackson 45 0
Michael Gregory 34 56
Ann Cawitch 23 0
Chris Lamb 34 50
...
First two words are name and surname of students. First number represents student's ID and second one represents ID of book. If ID of book is 0, it means that student hasn't borrowed book yet, so he can borrow some book. If ID of book is not 0, it means that student can't borrow a book until he returns the old one. So, when student borrows book, ID of book in file should change from zero to some number
This is my code:
void borrow(string name, string surname, int student_id,int book_id ) {
string a;
string b;
int c=0;
int d;
fstream f2;
f2.open("students.txt", ios::out |ios::in);
[Code] ....
Whenever I call function (for example borrow(John, Jackson,45,15)), I get answer "Student isn't sign up library."
Am I on a right path? How to make this code to work?
View 4 Replies
View Related
Oct 21, 2013
I have to txt files, and want them to read into an array line by line and after then a split the lines with delimeters, at the first file I use ";", at the second file I want to split the lines to single words by spaces. My aim is to get the first word from the first file and compare with all the words from the other file, to check is there any matches.
My problem is, that at the first file works everything fine, and I want to do the with the second file, but after reading the lines into lines_input[], I check the an empty = null line, I get segmentation fault.
You can see the code below:
Code:
#include <stdio.h>#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include <unistd.h>
//Change the
[Code] .....
View 1 Replies
View Related
Jan 31, 2014
I am writing a code to read a file and break it into lines and characters but I am getting an error do not know the reason for it though.
here is my code
#include<fstream>
#include<string>
#include<iostream>
[Code].....
The first line is executing properly but when it goes to the second line I get an error "the program has stopped working"
View 1 Replies
View Related
Oct 6, 2014
how could this program tell the ID's and Passwords of more than one line in the text document?
# include <stdio.h>
# include <conio.h>
# include <stdlib.h>
# include <string.h>
[Code].....
View 2 Replies
View Related
Nov 8, 2013
Reading a .dat file, i'm unable to open the file. This program is for a Air Quality index detector, the AQI machine records the particle concentration every minute and saves it into new data file for each day. So I need to make this program run every minute and convert the concentration in to the AQI readings.
The filename is of the format "ES642_2013-11-09.dat", where ES642 is the software name of the machine, and rest is the year, month and day. The code here is just for the file reading section:
Code:
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
[Code] .....
View 4 Replies
View Related
Jan 30, 2013
here is my code, I'm trying to read a .txt file into a 2D array... what's wrong with my code?
Code:
#include <stdio.h>
#define INPUT_FILE_GET_NAMES "names.txt"
#define INPUT_FILE_GET_SALES "sales.txt"
#define MAX_ROWS_NAMES 25
#define MAX_COLS_NAMES 20
#define MAX_ROWS_SALES 25
#define MAX_COLS_SALES 6
//Function Declarations
char getNames(char namesArray[][MAX_COLS_NAMES], char filename[]);
[Code]...
View 1 Replies
View Related
Feb 13, 2014
Once it gets to string name = fileWrite.ReadString(); in write file it throws this exception about unable to read beyond the end of the stream.
static void Main(string[] args)
{
WriteFile();
ReadFile();
[Code]....
View 4 Replies
View Related
Jun 28, 2014
I started learning programming a few days ago and i'm having trouble with reading each line from a listbox this is the code i'm having trouble with
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
public string[] getFlies
{
get;
set;
[Code]....
What am I doing wrong?
View 5 Replies
View Related
Jun 3, 2014
I am trying to read lines from a .txt file like this:
// "file.txt"
This is the first line.
This is the second line.
To do this, I tried using the following code:
int main() {
std::ifstream data;
data.open("file.txt");
[Code] ....
The output I want is:
This is the first line.
This is the second line.
However, all I am getting is:
This is the first line.
I can't quite see why this isn't working. I am decently familiar with file streams in C++, so I thought I would know what I was doing, but apparently not.
View 1 Replies
View Related
May 5, 2013
So I'm working on program I had in Windows Form Application.
I have a combobox that lists the years 1981-2013. Beside it, a simple Enter button.
I wanted to be able to assign individual lines of text to each year that would be displayed in the message box.
Like if the user selects 1981, clicks Enter and the message box displayed "In the year of 1981.." but if they select 1982, the message box displayed "In the year of 1982.." I have everything else I want working, except that I can't figure out how to assign different lines of text to different years.
View 2 Replies
View Related
Sep 15, 2014
I've been trying to read a .txt into a linked list in the attached code. I'm running into problems, specifically I'm getting errors on line 41 (curr->word=charTemp. I'm trying to set the word array equal to the charTemp array. I've tried strcpy with no luck .
Code:
#include <stdio.h>#include <stdlib.h>
#include <string.h>
//Struct for linked list
typedef struct node {
char word[25];
struct node *next;
} node;
[Code]...
View 2 Replies
View Related
Nov 20, 2014
I have an *.lct file. I like to read *.lct file and save an bmp image.
I can not read this file using usual file read.
Code:
void CLCTtoBMPDlg::OnBnClickedReadlctfile() {
CFileException CFileEx;
CStdioFile ReadFile;
CString OpenlctfilePath;
TCHAR szFilters[]= _T("LCT Files (*.lct)");
CFileDialog fileDlg(TRUE, _T("bmp"), _T("*.lct"), OFN_FILEMUSTEXIST | OFN_HIDEREADONLY, szFilters);
[Code]...
Find the attachment. change the file extension *.lct instead of *.txt. I like to read ASCII Data into Hex, Example : Data "A" as "41" (Refer the jpeg image). How is possible?
View 4 Replies
View Related
Mar 23, 2013
I am working on a program that deletes same lines in a text file. I already wrote it, but it still doesn't work.
Code:
#include <stdio.h>
main(){
FILE *f1,*f2;
char oneword[100],filename[25];
int c;
long int i,j;
char *norstring[500000]; /* I count from 1 */
[Code] ....
View 3 Replies
View Related
Jul 30, 2014
I have a text file with repeated lines, and i would like to get rid of the duplicate information, an algorithm to achieve this?
Example of my text file (the actual file may be huge, up to 500MB):
+Hello
+Bye
*The sun
-The moon
+Bye
/One coin
+Bye
+Bye
+Hello
*The sun
And i would expect to get something like this:
+Hello
+Bye
*The sun
-The moon
/One coin
I know how to open and read a file with fstream and getline(), but i don't know how to make the comparison.
View 6 Replies
View Related
Feb 27, 2015
lets say this is our textfile
-----------------------------------
45(here is space)string and other shit is here
454(here is space)string and other shit is here
4121(here is space)string and other shit is here
77(here is space)string and other shit is here
45545(here is space)string and other shit is here
1122(here is space)string and other shit is here
-----------------------------------
how do i get exactly that number in every line start? and compare but i jus tneed to get them to variable so ?
View 3 Replies
View Related
Apr 29, 2013
how to read random lines from a text file using "C", without repeating same lines.
View 10 Replies
View Related
Apr 26, 2015
I made a program which read a text file and copies text in an another text file if line doesn't contain a specific string(code is below), how can I make it after it finds out a line which contains this string to skip n lines ? I tried to use a for loop but without any luck..
Here is what I did until now :
rfile.open("test.txt");
wfile.open("out.txt");
while(std::getline(rfile,line)){
n=line.find(name);
if(n == std::string::npos){
wfile<<line<<std::endl;
}
//Here is the "problem"
View 5 Replies
View Related
Apr 27, 2014
I am new to C++ and I am having an issue reading in a 2 Dimensional array from a data file. I am very close to reading it in perfectly except for one issue, the loop is ignoring the first value from the data file.
This is the code I have so far:
#include <iostream>
#include <string>
#include <cctype>
#include <algorithm>
#include <functional>
#include <conio.h>
#include <iomanip>
#include <string>
#include <fstream>
[Code]...
This is the values from the data file:
300 450 500 210
510 600 750 400
627 100 420 430
530 621 730 530
200 050 058 200
100 082 920 290
When the Program shows my array it comes up as:
450 500 210 510
600 750 400 627
100 420 430 530
621 730 530 200
050 058 200 100
082 920 290 0
Every array location is moved up one, like the program just completely ignored the 300 at the beginning.
View 1 Replies
View Related
