I have already defined two arrays:
int songId[15];
char typeOfSong[15]
For my assignment we HAVE to use typedef to declare these. I tried a multitude of combinations using typedef, but then the rest of my code that uses songId and typeOfSong is not valid. How would I set up the correct arrays using typedef?
I have made VGA emulation with registers and memory in my emulator. But for some reason the writes to the union array with CPU data (register 0-8 of the VGA's Graphics Controller Registers, referenced with <GRAPHREGS>.DATA[index]) don't reflect on the union's data.
typedef union __attribute__((packed)) {
byte DATA[9]; //9 registers present!
struct //Contains the registers itself! {
//Set/Reset Register (index 00h)
union {
[code]...
what's going wrong? Have I made an error in the registers?
(In this case I write to register <GRAPHREGS>.DATA[8] (which should be the <GRAPHREGS>.REGISTERS.BITMASKREGISTER)), but the BITMASKREGISTER stays 0, while DATA[8] gets the correct value.
I'm given a mathematical function F(x) = etc..., the user inputs an initial x point and a final x point. The program finds the integration.
Below is a snippet of code.
/*Typedefs as given by prof*/
typedef double (*mainFunction) (double);
typedef double (*calcArea) (mainFunction, double, double);
int main () {
answer = calcIntegral(mainFunction *curve1, calcArea *calcAreaRect, a, B)/>; /*it doesn't like this line*/
printf("The integral from %lf to %lf is: %.4lf", &a,&b,&answer);
return 0;
}
curve1 is a function that accepts a double and returns a double, calcAreaRect takes mainFunction main(which is F(x) so i stored the fn in curve1), double and double.
I have some complex declarations to simplify with typedef I have done a try
1. Code:
char (*x[10]) (int);
/* typedef char FUNC(int);
typedef FUNC *FUNC_PTR;
FUNC_PTR x[10]; */ Why we don't use * symbol in the last statement in front of FUNC_PTR?
2. Code:
int (*x(int))[5] I can't do this :/
3. Code:
float *(*x(void))(int);
/* typedef float *FUNC(int);
FUNC *x(void); */
I have a .c file for each function of my program and i have .h,so how can I extern the following
in my main...
typedef int table[100][100];
how can I extern them in the .h and c files?
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <string.h>
#include <unistd.h>
#define HEIGHT 100
#define WIDTH 100
[code]....
I need to create the following brain damaging abomination:
I need a function pointer type to a function that has an argument of the same function pointer type and returns the same function pointer type.
The purpose is to enable a type of subroutine threading scheme for a small application specific scripting language. The question could just as well have been posted to the C forum.
This syntax works, but Payload is a generic type which I can coerce into the right pointer type via a cast. This is ugly IMHO. I could also hide it as a pointer in the FlipState class since I've forward declared this.
But this is an extra indirection in a performance critical part of the code, and also ugly.
Code:
class FlipState ;
typedef PayLoad (*FuncPtr) (FlipState *fs, PayLoad P) ; This syntax blows chunks using gcc on the other hand. Code: class FlipState ;
typedef FuncPtr (*FuncPtr) (FlipState *fs, FuncPtr P) ;
[Code] .....
This is hardly surprising. The compiler could not possibly understand what I was defining in the typedef. I think what I need is some kind of way to forward declare a function pointer type and then redefine it properly.
Is such a think even possible or am I just SOL? This one is mind boggling. We know how to do this with classes or other complex data types, but the syntax eludes me for both C++ and C.
I am having problems with passing my values through functions.
Here is my code:
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
void test(int**);
void test2(int**);
[Code]....
I want to have a function pointer inside a typedef struct but I get a segmentation fault when I run my code. Here's my code:
#include <stdio.h>
typedef struct Foo {
void (*bar)(int);
} Foo;
void func(int x) {
printf("display: %d
[Code] ....
class Tracker {
public:
static const int type;
typedef cv_types::CvType<type>::type_t type_t;
};
const int Tracker::type = 1;
gives me the error:
'I' : invalid template argument for 'cv_types::CvType', expected compile-time constant expression
Shouldn't the static const int be a compile time constant?
How would I specify it, so that it works?
PS.: The code works with #define type 1 at the top of the file and without the static const int.
Can typedef and struct be put inside a class like below?
Code:
class classA {
private:
typedef void(classA::*aFnPtr_t) (); //pointer-to-member function
struct strctA {
int a;
int b[100];
};
typedef struct strctA strctA_t;
typedef void (classA::*bFnPtr_t)(strctA_t*); //pointer-to-member function
...
}
Looking for info about the typedef 2-dimensional array ....
Suppose I have typedef two_Darr[3][3];
How to declare this and how to pass it to other function definition in the main function ....
Code:
typedef struct token
{
int tokenType; // what token is that
int tokenCode; // the code of a function if applicable
char *tokenString; // Source token
double tokenValue; // if token is a number
[Code] .....
I got several warnings and erros, is it possible to declare a table like that ? What's the correct way to declare it ?
I have a class "Result" with a single template function Set(const std::string& arName, T& val) and a specialization of this function Set<Real>(const std::string& arName, Real& val) where Real is a typedef for double. The class is in a shared library and I use it in my main program. If I do result->Set<GLOBAL::Real>("U", 100.0); the wrong template function is called!
I check this by the output with std::cout.
Maybe it's a problem with the typedef.
If I link the object file of the Result class directly to my main program (no shared library), it works.
typedefs.hpp:
namespace GLOBAL {
typedef double Real;
} results.hpp
#include <iostream>
[Code] ....
I define "Comwords" as a string, but apparently it takes the members as chars, then I can't set strings in a structure equal to the chars.
I see to also be having unknown problems with the ComMAL array and loading it values into another element of the same structure.
How to correct this? I was thinking of casting char elements as strings, but could find no reference in my library book regarding how to do that (lots on casting int's a doubles...)
Code:
int _tmain(int argc, _TCHAR* argv[]) {
int comm = 10;
int targ = 5;
int death;
struct AI_WORDS
[Code]....
Using a for loop, construct two 100 element arrays, x and y, such that element i of x stores the value sin(2*pi*i/100)) and the corresponding element of y stores cos((2*pi*i/100)). Print the values stored in the elements of x and y as you calculate them.
I have attempted to solve it but I'm not sure why the value 0 is only being printed, maybe I haven't assigned sin(2i/100)) and cos((2i/100)) to the arrays properly?
Code:
#include<stdio.h>
#include<stdlib.h>
#include<math.h>
int main () {
[Code] .....
int arr[4][5];
for (int(&row)[5] : arr){
for (int &column : row){
} }
Why do we name it row instead column?
int arr[row][column]
Wouldn't this be like
int arr[4][5];
for (int(&column)[5] : arr){
for (int &row: column){
}
It just seems funny to me because we use row[5] which should be 4 if we meant row? Or did I read it wrong in C++ prime !?
I'm trying to write a function that takes a 32bit address and a data to store at this address.
I'm wanting to take the 32 bit memory address eg 0x12345678 and split it
into 4 x 2 bytes
12, 34, 56, 78
then each of the 4 entries is at most a 256 entry array.eg
FF, FF, FF, FF
So in this example, 0x12 points to 0x34 in the second array, which points to 0x56 in the third array, which finally points to 0x78 in the last array. This last array holds the actual data.
After successfully doing 0x12345678, say I might get a read for 0x1234AABB. So, the first and second pointers already exist, but I then have to create and write to dynamically created arrays.
The arrays need to have all entries set to NULL so that i know whether to follow the pointers to overwrite a previously entered value or create new arrays and pointers.
It all looks good and simple in the pseudo code I've written up but I'm having trouble coding it. I'm currently trying to deal with the first entry case, ie all array elements are NULL, but I'm getting confused with the pointers and creation of new arrays.
void cpu::store(unsigned int mem_add,unsigned int mem_val) {
int first = (mem_address&4278190080)>>24;
int second = (mem_address&16711680)>>16;
int third = (mem_address&65280)>>8;
int fourth= (mem_address&255);
[Code] .....
A1 has been declared as
int* A1[256] ;
like for example if
Num1[0]=2
Num2[0]=3
this is not working x= Num1[0] + Num2[0];
is there any other way ?
Basically on this assignment I must write program that inputs two positive integers of at most 100 digits and outputs the sum of the numbers into an array. The two positive numbers must come from different arrays and the sum has to be stored into another array.
View 2 Replies View RelatedFor example if we have
array1[5]= {1,2,3,4,5}
and
array2[5]={2,3,4,0,7)
how do you sum them up as 12345 + 23407 . And when i say sum I mean normal mathematical sum.
here is my code:
int main () {
string str1;
string str2;
[Code].....
Compiled on turbocpp 4.5.....error is that the final merged array is much bigger with garbage values...
Code:
//cpp program to concatenate 2 arrays
#include<iostream.h>
#include<conio.h>
//the class
class array
[Code] .....
how to make the functions for b, c, d. if possible running through on how to would be more beneficial than just giving me the answer.
Global warming. As part of a global warming analysis, a research facility tracks outdoor temperatures at the North Pole once a day, at noon, for a year. At the end of each month, these temperatures are entered into the computer and processed. The operator will enter 28, 29, 30, or 31 data items, depending on the month.
You may use 500 as a sentinel value after the last temperature, since that is lower than absolute 0. Your main program should call the read_temps(), hot_days(), and print_temps() functions described here:
(b) Write a function, read_temps(), that has one parameter, an array called temps, in which to store the temperatures. Read the real data values for one month and store them into the slots of an array. Return the actual number of temperatures read as the result of the function.
(c) Write a function, hot_days(), that has two parameters: the number of temperatures for the current month and an array in which the temperatures are stored. Search through the temperature array and count all the days on which the noon temperature exceeds 32F. Return this count.
(d) Write a function, print_temps(), with the same two parameters plus the count of hot days. Print a neat table of temperatures. At the same time, calculate the average temperature for the month and print it at the end of the table, followed by the number of hot days.
Code:
#define _CRT_SECURE_NO_WARNINGS
#include <stdio.h>
#include <stdlib.h>
int main() {
int a[10],b[10],c[10],i,j,k,n,m;
printf ("Enter the size of the first vector: ");
scanf ("%d", &n);
[Code] .....
Now, this is what I've been able to do so far, i know it's very basic but I just started learning programming! I tried different methods found on internet but none of them work for me. I want to find the intersection of arrays a & b then put them in array c(or just display them?)
I am attempting to assign "randomChoice" as the array index of the "listOfWords" array then copy "listOfWords[randomChoice] to "selectedWord". I am not sure if it is that I do not fully understand the use of strcopy() or something wrong with my arrays.
This is my error:
Code:
hangman.cc: In function ‘void SelectWord(char (*)[80], int, char*):
hangman.cc:84: error: invalid conversion from 'char' to 'const char*' And my code:
Code: #include <iostream>#include <fstream>
#include <cstdlib>
#include <cassert>
#include <cstring>
[code].....
This is a function that is supposed to add two different arrays containing 9 items together, but it has a problem when it comes to doing any actual adding.
Code:
int * add_data(int x[], int y[], int z[])
{
int i;
char a[9];
for (i=1;i!=9;i++)
{
printf("%d =x
", x[1]+y[1]);
x[1] + y[1]= a[1];
}
return a;
}
I have one small doubt in arrays. Is it possible to define arrays like this a[b[10]] ?...
View 6 Replies View Related