A few months ago I wrote a simple neural network using back propagation algorithm. It's input is a 2D array of any given size and type. I tried to make it learn the logic functions like AND & OR it worked. So now I want to try image recognition and I need the image as a 2D array of RGB values.(I mean three arrays of course one 2D array for each color.)
How can I get an array of RGB from an image? Can I do it with streams?
Any simple example of deletion from the end here is the algorithm
1. If n=0 then array is underflow step
2. A (UB) <------- null
UB <---- UB1
3. Stop
Example:
Suppose array
Arr[0]=5 , Arr[1]=8 , Arr[2]=10 , Arr[3]=7
After Deletion
Arr[0]=5 , Arr[1]=8 , Arr[2]=10
How to delete the last element of array?
So I am writing a map generation algorithm (with SFML), and it seems the problem is in here:
Sprite sprites[32][32];
void genmap(){
Texture grasstiletex;
grasstiletex.loadFromFile("data/grasstile.png");
[Code] .....
But when I run it I get: Unhandled exception at 0x69791f34 in sfmlproject.exe: 0xC0000005: Access violation reading location 0x001b5000.
Write a program that has an array of at least 20 integers. It should call a function that uses the linear search algorithm to locate one of the values. The function should keep a count of the number of comparisons it makes until it finds the value. The program then should call a function that uses the binary search algorithm to locate the same value. It should also keep count of the number of comparisons it makes. Display these values on the screen.
/*
search benchmark.cpp
this program searchs through a array of 20 integers
*/
#include <iostream>
#include <string>
#include <iomanip>
using namespace std;
int array [20];
int count;
[Code] .....
My program generates an array of random numbers. I want to then search a specific number within the array. If the number is in the array then a message apopears on the console saying that its there. I'm using the binary search algorithm to do this.
#include <iostream>
#include <ctime>
#include <cstdlib>
#include <iomanip>
#include <cstring>
using namespace std;
int size;
int getSize() { return size; }
[Code] ......
I am trying to read a 24 bit image but I'm getting errors when I'm tryting to read the pixels.
-The reading part looks bad because I'm reading both headers field by field. But I'm sure that it is reading both headers correctly.
-Right now my biggest concern is to get it to read successfully an entire bmp image
I'm using this calculation to get my padding bytes:
padding bytes = [4-(3*width)mod 4]mod 4
When I use a 2x2.bmp file to test it, I get an error that the [1][1] pixel was not read. When I use a bigger image it gives me the same error after about 100 rows and then every pixel is an error from that point on. This is what I got so far:
Code:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
const size_t cSizeofPixel = 3; //size of struct tPixel
typedef struct{
unsigned char blue;
unsigned char green;
unsigned char red;
[Code]...
I read this post Reading 24 bit BMP file into a 2d array.
I still don't know if my error is when I allocate memory to my 2d array, or if I'm doing the padding bytes wrong or if it is something else.
I have an assignment where I need to take an assigned image, rotate it 90 degrees to the right, flip it upside down, and turn it to grayscale; each with different outputs.
I was thinking if I can read in the image into a 2d array //array[height][width] or even just an array with the values of each pixel (r, g, b), I can just modify the array and spit it out when done.
if i can just get it into the array, I think I'll be fine. We've done similar assignments with modifying arrays for grayscale images and the other two I can probably figure out. But how am I going to read in each pixel into an array with three different values in each slot? This is my code so far:
Code:
#include<stdio.h>
My assignment is use a 3D array to create an image. Use an array of the form arr[300][200][3]. For this homework, you need to use an array of the form arr[3][400][500]. It will have 400 rows and 500 columns. You need to first initialize the array as described in class and after that write the array to a ppm image file. When viewed using Gimp, it should display USM. The letters would be 200 pixels high and 100 pixels wide each. Use at least 15 pixels for the width of the stroke. Use different colors for each letter and a different color for the background.This is what I have so far.
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
void initialize(unsigned char a[][200][3], int nrows, int ncols, int nc);
void printAll(unsigned char a[][200][3], int nrows, int ncols, int nc);
[code]....
Im trying to compare the image of a button to another image in Visual Studio like so...
//variables
Image active = Image.FromFile("C:\Users\Ethan\Desktop\StarWars Status\active.png");
Image stunned = Image.FromFile("C:\Users\Ethan\Desktop\StarWars Status\stunned.png");
[Code]...
btnStatusPlr1.Image SHOULD come back as True.Then I realized it might not be the same as setting the buttons image in the properties (Which is what i did to get the original image (the one being compared to))
I do have a feeling ive done something wrong here (Yes im a noob /> )
Variable active, is the same image as the buttons default (Well should be)
This program is sorting a randomized array of integers using the bubblesort algorithm.
I am trying to modify n correct the source code,so that the swapping of two values will be done by a function called swap values() by using call-by-reference but function should have as arguments only the two array elements that must be exchanged. (Note: do not pass the whole array to the function!) .We consider an array with the first element containing the number of elements in the array, followed by 10 randomly initialized integers (elements).
The code must sort the 10 elements in ascending order.
Compile: g++ -Wall sorting.cpp -o sorting
*/
#include <iostream>
#include <stdlib.h>
using namespace std;
int main() {
const int SIZE=10;
[Code] .....
I'm trying to read a PPM image into an array. The header will have already been read in and I'm trying to put in a 2-d array to make manipulations easier. This is the code I have so far with LOTS of errors and warnings and I honestly don't know what almost any of them mean.
Code:
int imageArray( FILE *input, struct pixel *theArray ){
int i, j;
int col, row;
int *imageArray = (int**)malloc(row * sizeof(int*));
for(i=0; i<row; i++){
[Code]...
I have a problem concerning transforming int array into bmp image. I wanted to add a post in this topic: [URL] .... , but unfortunately it is closed. Actually I have a question concerning the code written by Duoas. I have a function which takes values from the file and I want to convert it into bmp with the use of Duoas code. I do it like that(it's Duoas code + my load and main function) Is it something wrong with how I do it or it's rather sth wrong with the file.
It compiles without errors but when I run it: core dumped.
According to gdb debugger problem is here: double hue = (intarray[ row - 1 ][ col ] - min_value) * granularity; programs stops, segmentation fault ...
#ifndef INTARRAY2BMP_HPP
#define INTARRAY2BMP_HPP
#include <fstream>
#include <iostream>
#include <string>
[Code] ....
I am trying to retrieve an image from its URL as an array where each box represents the pixel value of the image.
View 3 Replies View RelatedI will make a program to read the image in C++. And later, the image will represent by array 3D, which (x,y) represent the spatial coordinate of (height*weight) image (pixel) and z represent the intesity of those image (0-255).
In matlab, the code for do that is --> imread('image.jpg')
How can I do that in C++?
I am working on a program which turns a 256 color bmp image to a txt file of a array of 0-255. I wrote this:
#include<iostream>
#include<fstream>
// if 1 , see bmp file header info
#if 1
#define SEE_INFO
#endif
using namespace std;
[Code] ....
Something weird happened. When I use it on simple.bmp (Attachment), it works fine. But when I use it on flower.bmp , it just give me zeros.
Attached File(s)
simple.bmp (3.39K)
simple.txt (8.47K)
flower.bmp (76.05K)
flower.txt (150.49K)
I m loading a png image by using the ATLImage library.
CImage Image;
Image.Load (L"D:ImagesPNG_ImagesImage7.png");
how to retrieve the byte array value of this png image. I tried retrieving it as
byte *png = reinterpret_cast<BYTE *>(Image.GetBits());
but when i access the data , der is a loss of data while converting it in the above manner.
I found a snippet in net for decoding the raw data . but der is a line is the code which is unknown to me. The code is as follows :
CImage atlImage;
HMODULE hMod = GetModuleHandle(NULL);
atlImage.Load(bstr);
void* pPixel = atlImage.GetBits();
intpitch = atlImage.GetPitch();
intdepth = atlImage.GetBPP();
[Code] ....
How do I get the byte * value form the png image loaded?
I like to Draw an Image Using two dimensional byte array[512][256].
I used SetPixelV method to plot the image.
But Its very slow & hidden some buttons(Controls) at run time in the same dialog.
For reference i send some code,
Code:
for(row = 0; row <512; row ++)
{
for(col = 0; col < 256; col++)
{
Data[row][col] = y;
SetPixelV(d, 10+row, 10+col, RGB(Data[row][col],Data[row][col],Data[row][col]));
}
}
I need to save RGB values of each pixel in a 3D array A[width][height][3]. I found a code online that transfers the bytes into an array but I cant understand how bytes are saved them so i could transfer them into an array. The truth is I dont know much about working with images at all so i have a problem working on them. How to transfer the RGB data from an .jpeg image into a 3D array? This is my code so far:
#include <iostream>
#include <jerror.h>
#include <jpeglib.h>
using namespace std;
int main(){
FILE *pic = fopen( "image.jpeg", "rb+" );
[Code] .....
I am trying to read the information from a .bmp file into my program while dynamically allocating memory for all of it. So I defined the structures for the headers and for a pixel, and then I have to read each pixel into a multi-dimensional array of pixels. I am completely new to structures, and definitely new to pointers combined with structures. I will have to use a filter with the information later, but right now I just want to read everything in correctly. The array of pixels will be two-dimensional -- the width by the height of the image, I guess.
Here's my code:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
int main(int argc, char *argv[]) {
FILE *inFile, *outFile;
typedef struct
[Code] ....
My requirement is,
Read *.bmp image and displaying bitmap image with scrollbar in a MFC dialog application.
I was done using this
I was read the *.bmp image as a pixel data and stored by 2D Array,
Now i want to Display this 2D array as bitmap image with scrollbar separately in the same dialog. How can i display bitmap with scrollbar using 2D array?
I am writing a class which loads a bitmap image into a one dimension char* array.
This class has methods to allow for resampling and cropping the image before saving the bitmap image. It works perfectly for all images in which the width is divisible by 4. However when the width is not divisible by 4 the resulting bitmap is all mixed up.
I have spent much of the day googling this problem but to no avail. I know it is a problem with making sure the scanlines are DWORD aligned, and I believe I have done that correctly. I suspect that the problem is that I need to take the padding into account during the crop for loops but am lost to how to do this.
BTW: Coding on Linux using GCC
The following code is a cut down version from my bitmap class. I have removed methods which are not needed to make reading a little easier.
#include "BMP.h"
// FIXME (nikki#1#): Portrait bug on images of specific sizes
// TODO (nikki#1#): Memory leak checks
// THIS METHOD WRITES A BITMAP FILE FROM THE CHAR ARRAY .
bool BMP::saveBMP(string fileName, string *err) {
FILE *filePtr;
[Code]...
I have an algorithm which uses nested for loops, which looks for duplicate elements in an array. However, as soon as one duplicate element is found... the program will stop looking for more duplicates? My program continues to look for more even though one is found? I know there is a break command but I can't get it to work. Code is below:
output of program: Repeating element found first was: 2, 1
Although I want the outcome to be; Repeating element found first was: 2
#include<stdio.h>
#include<stdlib.h>
#include <iostream>
using namespace std;
void printRepeating(int arr[], int size) {
int i, j;
[Code] .....
I am writing a simple console-based tic-tac-toe game. I am trying to write a function to check whether someone has won the game.
The board data is saved in an array called board: Code: int board[3][3] with each element corresponding either to an empty spot, an X, or an O, using the numbers 0, 1, and 2, respectively. For clarity:
Code:
#define EMPTY 0
#define X 1
#define O 2 Here is my function: Code: int check_state(int board[3][3]) {
int winner = 0;
[Code].....
A few days ago I got a "bright idea" to see if I could match a string, with an arbitrary length from 1 to 12, to its formulated sequence by using an algorithm to find all possible combinations of the integer combinations from 0 to 9 at each length (1 to 12).
Example: Desired numerical combinations from integers 1 to 3:
At Length 1:
1, 2, 3
At Length 2:
11, 12, 13, 21, 22, 23, 31, 32, 33
At Length 3:
111, 112, 113, 121, 122, 123, 131, 132, 133, 211, 212, 213, 221, 222, 223, 231, 232, 233, 311, 312, 313, 321, 322, 323, 331, 332, 333
And so on until the nth length (in my case a length of 12).
First off, I would like to say that this is not as easy as I thought. I clearly underestimated the problem seeing as I've spent hours attempting to write a working algorithm, but feel like I've made no progress.
Here are a few of my attempts:
Attempt 1:
#include <iostream>
#include <algorithm>
#include <math.h>
#include <string>
[Code]....
I can't exactly explain this one. It works if the length is 2 or less; however, the order of the output is horrendous.
Attempt 3: I tried using recursion, but only found myself getting more and more lost the further I tried developing my function. Cannot find my work for this attempt.
I would really like to figure this out on my own, but I am very stuck as you can see. I also lack time that I can spend working on this since im a full time student.
I wrote a version of find_all() which searches through containers for matches and returns another container that holds iterators pointing to each match. When I compared what I wrote to what the authors of Professional C++ wrote, I found the two find_all() functions to be very different.Here they are:
//Mine
template<typename Iterator, typename Predicate>
std::list<Iterator> find_all
(Iterator front, Iterator back, const Predicate& match) {
std::list<Iterator> toreturn;
for(; front != back; ++front) if(*front == match) toreturn.push_back(front);
[code]...
I have VRP algorithm written in C++, run with command prompt Windows. input (command line) -> VRP.exe -> output (txt file)
Now I want to built a website to run it as SaaS. How to run an exe application(compiled c++) in server used as Saas? What kind of programming do I have to use? Ruby or html5 or others? I don't know how to start.