Is it possible to define and write your own file extension. if so is it an easy process or a complex waste of time. All I want to do is define a source file for a programming language I write.
View 3 Replies
I have a problem with an extension DLL that has an exported function. The function is being exported ok, it is called by a Windows service. The Windows service is using the exported function, and everything works. I am trying to create a file with:
ofstream file;
file.open("C:dir ofile", ios:ut);
file << "text";
But nothing happnes however. There are no errors, the file is just not created. Also, if i try to call MessageBox() in the exported function, nothing happens as well . I have a .h file which exports the function with __declspec(dllexport) DWORD WINAPI functionName(), and also a .cpp file with the function definition. There is no main().
I have a list of files stored in a .txt file
$codeguruc++display.txt$15$
Directory File Folder: codeguruc++
File Name: display.txt
File Size: 15kbs
$ is an delimiter
I want to extract the name and the extension from txt files.
Code:
#include <iostream>
#include <fstream>
#include <cstdlib>
struct MyFile {
std::string Directory;
std::string Filename;
unsigned filesize;
[code].....
The code below is used to return a file path.
private string BrowseJournalFile(string startRelativePath)
{
string str = "Journal files (*.log)|*.log|All files (*.*)|*.*";
return PathTools.BrowseFile(startRelativePath, str, this.RootPath);
}
So once I click browse I get something like "E:New Files" But there is this .log file in this folder which I want to automatically store in this path.
Right now I have to click on this .log file and then select open. Is there a way I can directly load the file.I have been trying to use the FileStream but no luck.
I am trying to write a function that determine if a file in a directory is of a gif/bmp/png/jpg extension. Right now I think I have correctly written my code all the way up to listing the files in the directory and opening them in binary mode.
Now, I am struggling with figuring out how to determine what extension the image is. Right now i am just focusing on writing my "bool isGif();" function... To determine if a file is a .gif extension using binary, the first 6 bytes of the file will contain either GIF87a or GIF89a.So, to do this I would read the first six bytes of the file using the function below, correct?
fin.read((char *) &a_file, 6)
Then, once I read in the first six bytes how would I conditionally compare it to determine if it is a .gif? Would I just use
if(fin == "GIF87a II GIF89a) {
\do something here
}
Because that doesn't seem to be working...
If I don't assign the icon to my executable file (f.e. it's a DOS application), or I have some unknown extension in the file, Windows Explorer assigns the icon to this file.
Is there a way to somehow get this icon? Either from the registry or by any other means.
I have written code for a timer. with everything and i want to include this so i dont need to write or copy the reqd code each time. how do i do this?
View 9 Replies View RelatedI program unix sokcet programming , and part of my code is ti open file from server and open it , but i surprised with this wierd error i dont have any reason for it ?
Code:
#include <errno.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
[Code] ....
File name is : myHeader.h
myHeader.h:24:1: error: unknown type name "File"???
I want to define enumeration inside a structure and use it in some other file
for eg
header.h
typedef struct dummy {
typedef enum {
ZERO,
ONE,
MAX
} NUMBERS;
// some member variables
} DUMMY; // end of the structure
otherfile.cpp
in this file i want to access both enumerations(for eg) ONE as well as the type NUMBERS.
My problem is to count the characters in a file and define how many times each one occurs.Characters who are not found must not be included in the table; The output must be a table - like that -
”| character | ASCII- DEC | ASCI – HEX | how many times it occurs |”
This my function:
Code:
int f2(FILE *p1)
{
FILE *g3;
int char_count[256]={0};
char ch;
int n=0;
if(!(g3=fopen("D:zz.txt", "w"))){
[Code] ....
It must look like this:
| D | 68 | 44 | 2 |
| 2 | 50 | 32 | 1 | and so on...
I have a problem with making header files in c, i get the code written only in main.c and then i have to create a files with extension .h and extension .c but how to do it.
View 4 Replies View RelatedIs it possible with C# to get the default program for an extension? I've already done some research for it, but the only thing I've found out is a way to make my program the default program for an extension. So I my question is, is it possible to use anything similar to check if there is already an default program for an specific extension and which program is it?
View 2 Replies View RelatedIf I drop this regular dll project and create a new MFC extension dll project, it will involve too much work. I wonder if there is relatively easier way to convert an existing regular dll project to a MFC extension dll project? BTW, how can I tell a MFC extension dll project from a regular dll project?
View 1 Replies View RelatedI have created a Namespace Extension (I hope so) by creating a ATL Project with MFC support as dll in Visual Studio 2010.
Now I have a Implementation of IShellFolder:
Code:
// ILCShellFolder.h: Deklaration von CILCShellFolder
#pragma once
#include "resource.h" // Hauptsymbole
#include "NewNSE_i.h"
#if defined(_WIN32_WCE) && !defined(_CE_DCOM) && !defined(_CE_ALLOW_SINGLE_THREADED_OBJECTS_IN_MTA)
[Code] ....
Not any of those IShellFolder Methods is being called... When I attach the explorer.exe process (which I know I can use to debug on other projects, just in case to exclude errors) it tells me that the DLL is not loaded by the explorer.exe process.
I'm digging an old project and i can't switch to a newer visual studio.
I want to plot float data array during debug.
I know some IDE's have such option. There is a separate window in which we can plot data.
Can I write such plugin for Visual Studio 6.0 using visual studio SDK?
Does it support 6.0 version?
One of my class assignments is to create a program that receive a .txt file containing a students name and their grades as follows:
John K. 99, 87, 57, 89, 90, 95
Amanda B. Jones 100, 88, 76, 99, 86, 92
etc..
The number of students is unknown until run time. You have to take those grades and average them weighing the first (4) at 10% a piece and the last (2) at 30% each.
Then return an output file with the students name and their letter grade A,B,C,D,F based on their computed score. In addition, on screen it needs to display the average scores for each Q1, Q2, etc. as well as the minimum and maximum for each test on the screen. I am having a hard time in assigning the scores to a variable so that they can then be computed as an average and then used to determine a letter grade. I have begun to write the code and am a bit stuck..here's what I have so far:
Code:
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
[Code]....
The Objective Of This Program Is To Create A File To Write Text And Read Back The File Content. To Do That I Have Made Two Function writeFile() To Write And readFile() To Read.The readFile() function works just fine but writeFile() doesn't.
How writeFile() function Works? when writeFile() function Execute It Takes Characters User Type And When Hit Enter(ASC|| 10) It Ask "More?(Y/N)" That Means What User Want? Want To Go Next Line Or End Input?
If "Y" Than Inputs Are Taken From Next Line Else Input Ends.
But The Problem Is When Program Encounters ch==10 It Shows "More?(Y/N)" And Takes Input In cmd variable.If cmd=='Y' I Mean More From Next Line Than It Should Execute Scanf Again To Take ch I Mean User Input.But Its Not!!! Its Always Showing "More?(Y/N)" Again And Again Like A Loop.
Code:
#include <stdio.h>
void writeFile(void);
void readFile(void);
int main(){
[Code].....
how do i decompress an input file and write the results into an output file?
also my do while loop is supposed to keep going unless the user selects the option to exit the program, instead it exits after finishing ay of the options.
here's my code so far...
#include <iostream>
#include <iomanip>
#include <fstream>
[Code]....
I have a .txt file which I want to read from and then write a new text file, this time with sorted lines. It is easy to sort one value, but what about sorting entire lines based on one value?
I want to sort the lines based on the FIRST value.
Example text file contents:
values;data
5.01 100
2.9 342
2.69 43534
10.1 43
6.8 45324
Output: Text file containing
2.69 43534
2.9 342
5.01 100
6.8 45324
10.1 43
It's easy to do this if there was only 1 number on each line, but I do I sort all the lines based on the first number in each line?
We have to write a program that reads an input file containing data in the form:
Martha J, 80, 90, 90, 100, 89, 99, 85
Anna Smith, 65, 72, 77, 68, 62, 70, 65
Bill Gates, 60, 54, 89, 62, 65, 60, 50
...etc...
and then use that information to determine their letter grade and write that information to a .txt file. I have been able to successfully pass that information to a function to determine their letter grade and have been able to successfully compute their letter grade. However, I can get this information to successfully post within the *computeGrade () function. Yet, I don't know how to pass this information back to the main() on a student by student basis so that I can open a new .txt file and write just their name and letter grade to it.
Another issue I'm having is when it comes to computing the averages of the class. Each score is either a quiz (there are 4), a midterm (there are 2) or a final (there is 1). I'm a little stuck on how to pass say all of the quiz 1 grades as one entity to the function averagesminmax(). Is there a way to compile each of the grades for a specific quiz or midterm as one array and pass that to the function to then do the computation. Also we need the min and max so again from compiling the grades of a particular quiz or exam together as one.
Here's the code that I have so far.
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
const char *computeGrade();
int averagesminmax();
int main() {
char fName[20];
char lName[20];
[code]....
Do I need to re-read the input file and assign them to different variables?
Here's a sample of the output so far:
Enter input .txt file name
Graded
Thui Bhu, 91, A
Ariana B. Smith, 96, A
Emily Gonzales, 83, B
Jennifer L, 89, B
Maria Jones, 67, D
Bill Gates, 55, F
Escobar Morris, 78, C
Anne Latner, 88, B
Program ended with exit code: 0
Also in my output file, the only thing that it prints will be the first name of whatever the last student in the input file list is.
I am trying to get the code to read from the txt file one bite at a time and then write this bite into the binary file but i cant seem to get it working.
FILE *fpcust, *fpcustbin; //<<<<<-----point to both sales and customers text files, and the new .bin files for both
char buffer;
int ch;
int ch1;
fpcust = fopen("c:customers.txt", "r"); //<<<<-----pointing to the file
fpcustbin = fopen("c:customers.bin", "wb"); //<<<<<-----pointing to the new binary file, opening in writing binary
[Code]...
im supposed to create a program that reads in a list of integers from the terminal and writes the negative numbers to one file and the positive numbers to another file.
i got most of it doen but for some reason its not writting the negative numbers. on what im doing wrong?
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
int main(){
int pos_num = 0;
int neg_num = 0;
int positive_numbers = pos_num % 5;
[Code]...
I'm using
CString text;
CString file_name;
text = "My text.";
file_name = "MyFile.txt";
FILE *fp;
fp = fopen(file_name, "w+");
fprintf(fp, text + "
");
fclose(fp);
There will be MyFile.txt in Windows codepage.
How to write to txt file with DOS codepage?
I can only write one value to file:
get all, say for example barcode
char* bst:: get_bar(hwareItem*& root){
while(root!=NULL){
get_bar(root->left);
[Code]...
gets only one value depending on traversal orderI wish to get all values of BST
so i have this dll with a DBTProc, whenever a window gets created i want to write something in a log file. Now everytime I run it it adds three times the text in this log file, but then it does nothing anymore. I do hear a beep everytime a window get created so it doesn't actually open my file to write in
code:
LRESULT CALLBACK CBTProc(int code, WPARAM wParam, LPARAM lParam)
{
if (code < 0)
{
[Code].....
How can I erase the data stored in /tmp/a.txt after every run of this code?
Code:
#include <stdio.h> // IO operations
#include <unistd.h> //for pid, ppid, fork functions
#include <sys/types.h> //for pid_t type, kill function
#include <stdlib.h> //for exit function
#include <signal.h> //for kill function
#include <sys/types.h>
#include <sys/stat.h>
[Code]...
