I'm trying to load a file that look like this:
IP:123.123.123.123
Port:12345
I can't figure out how to load multiple lines. I tried using , but I can't get it to work. Is there a better way of doing it than I am right now? This is my code.
char message[100];
int messageCount = 0;
for(unsigned int i = 0; i < file.size(); ++i) {
message[i] = file[i];
[Code] ....
int statarray[] = {61, 66, 47, 50, 372,
62, 66, 47, 50, 372, 50, 54, 64, 45, 331, 49, 52, 58 69, 356,
58, 80, 50, 48, 389, 76, 64, 60, 59, 401, 76, 59, 57, 54, 422,
53, 45, 45, 52, 253};
I'm getting a bunch of different errors with this, how do we do this?
How would I go about inputting data from multiple lines using scanf?
So far I have tried a loop and somehow checking for '' but can't seem to figure it out..
E.g I want to be able to scanf the ints below line by line and print them( if that makes sense) .
5 15 20 30 5 6
5 6 8 20 34
5 6 7
5 2
2 6 7 2 1 6
This is what i've tried so far, but am really lost!
Code:
int input;
while(scanf("%d", &input)){
printf("%d",input);
if(input == '
'){
continue;}}
I am trying to convert multiple lines of strings to double with std::stod .... I used the code found on the website:
#include <iostream>
#include <sstream>
#include <string>
#include <fstream>
int main() {
std::string two_doubles =" 22145.365 -3564789";
std::string::size_type K;
double first = std::stod (two_doubles, &K);
double second = std::stod (two_doubles.substr(K));
}
The string starts with white spaces. I get this error message when compiling:
warning unused variable 'first'
warning unused variable 'second'
How do you convert the two numbers in the string two_doubles to doubles?
This code i made is a cent converter from 5 to 95 cents. The problem i'm receiving is when the 'cents' function is sent back to the 'main' function it only prints one line. It seems to just print the first if construct that complies with the statement. Is there anyway i can have this function print multiple cent values? For example if 60 cents was entered it would only print '50c', and i want it to print '50c' and '10c' instead.
Code:
#include <stdio.h>
int x;
void check(int x)
{
if( x < 5)
printf("Less then 5 cannot be calculated
");
else if(x > 95)
[code]....
I am trying to make a messageBoxButtons dialog with the 'yes, no' buttons. Im having trouble because of the multiple lines and parameters already in the message, this means that when i declare the messageBoxButtons.YesNo and the title - it throws an error because of the multiple lines etc...
How can I get the yes/no message box to work in this instance?
class Output {
string text; {
DialogResult dialogResult = MessageBox.Show("Please make sure the following information is correct before submitting."
+ " Date: " + Date
+ " Hours worked: " + Hours
+ " Hourly rate: $" + Rate
[Code] ....
I am writing a pure C based win32 applications. I have drawn line. Now i want to translate that line, move the line whereved user wants to move on screen. Then again I drawn another line, I am drawing multiple lines.
I have created rectangle region for each line and trying to move the line.
When I move the 2nd line over the 1st line on screen the 1st line is getting wiped out. Because I am InvalidateRect() of the rect for the line being moved, so when that rectangle is crossing the other line then the other line is getting removed from the screen.
How can I rectify it. How can I have all the lined being on the screen and moved according to the user's wish. The code should be pure C and win32 no MFC.
Using cin.sync() works great so far, but my program still breaks if you copy something with multiple lines into the console.
string test = "";
while(true) {
cin.sync();
getline(cin, test );
cout << endl << "test: " << test << endl;
}
However, if you were to copy this:
1
2
3
and paste it into the program, the output would be1
2
3
test: 1
test: 2
And if you press enter one more time:1
2
3
test: 1
test: 2
test: 3
The 3 finally pops out.
I am writing a piece of code that requires me to display the last 1000 lines from a multiple text files (log files). FYI, I am running on Linux and using g++.
I have a log file from which - if it contains more than 1000 lines, I need to display the last 1000 lines. However, the log file could get rotated. So, in case where the current log file contains less than 1000 lines, I have to go to older log file and display the remaining. For e.g., if log got rotated and new log file contains 20 lines, I have to display the 980 lines from old log file + 20 from current log files.
What is the best way to do this? Even an outline algorithm will work.
Alright i have my program and it loads the vector fine and even puts the vector into a txt file but when it comes to lloading it again im not sure if it works or not
#include <iostream>
#include <string>
#include <fstream>
[Code]....
The program is supposed to read in a text file, load it into an array and assign a character to each number in the array (so for this I'm thinking I'll be creating 2 arrays, an int array with the numbers read in from the file, and a char array with the characters assigned to the numbers). It will then print these two arrays. It's then supposed to go through the initial int array and search for any numbers whose values differ from their neighboring values by more than one, if such a value is found, it's supposed to give the number the value of the average of it's neighboring values. It's supposed to make all these corrections and then assign characters to these corrected numbers and print out both arrays.
How to load the array from the file. My textbook seems to do a good job of covering arrays and files, but it doesn't really bring them together and talk about building arrays from files. Here is what the file looks like, the first number is the size of the array.
10
7 6 9 4 5 4 3 2 1 0
6 5 5 5 6 5 4 3 2 1
6 5 6 6 7 6 8 4 3 2
1 5 6 7 7 7 6 5 4 3
5 5 6 7 6 7 7 6 5 9
5 6 7 6 5 6 6 5 4 3
5 6 7 9 5 5 6 5 4 3
5 5 6 7 6 6 7 6 5 4
5 9 5 6 7 6 5 0 3 2
5 5 5 5 6 5 4 3 2 7
And here is the code I have so far:
#include <iostream>
#include <fstream>
using namespace std;
[Code]....
When I attempt to compile this (I'm working on a Linux system), I'm getting several errors:
prog1.cpp: In function ?int main()?:
prog1.cpp:37: error: expected unqualified-id before ?[? token
prog1.cpp:39: error: ?numArray? was not declared in this scope
prog1.cpp:39: error: expected primary-expression before ?]? token
What is the most efficient (fastest) way to load data from a file on HDD to RAM? (which would allow to only load a limited section of that file - eg. load only half of the file etc.)
View 3 Replies View RelatedI am trying to copy the stats from the save file "lol.txt" to main. I posted what the contents of the file below, but for some reason the I get for output jiberish and I cannot seem to figure out why.
#define _CRT_SECURE_NO_WARNINGS
#define MAX_NAME 31
#include <stdio.h>
int main(void){
char sName[MAX_NAME];
[Code] .....
I'm having troubles with loading my text file into my array.
Code:
int main(int argc,char* argv[]) {
if(argc!=3) {
printf("
Insufficient arguments
[code]...
I'm also suppose to return the size of the input at the end.
What is the best / most efficient way to load polymorphic data from a file? I thought you could have an enumeration and for each item to load from a file you could have an integer at the start specifying the type of data, but I think there must be a better way I'm just not sure what.
Example of what I mean:
//The syntax isn't really that important for explanation
class base;
class a: base, b: base;
enum polymorphicType {
A,
B
};
and in the loading code you would have (this is the bit I think could be improved):
polymorphicType t;
File >> t;
if(t == A) {
newObject = new A;
} else if(t == B) {
newObject = new B;
}
I think there is probably a more efficient/better way of doing this I am just unaware of it.
Why my code is not working?
Interface
class Person{
private:
char name[80];
short age;
public:
void get_data();
[Code] .....
This is a simple example from and old Lafore C++ book, with a few tweaks by me. The point is simple. Save object person to a *.dat file, exit the program, then start up program again, open up *.dat file, and load contents.
The first problem is the compiler is printing a bunch of Asian characters to the file (is this normal?)
The second problem is, it's not loading the object as it should, giving me a bunch of gibberish.
#include <cstdlib>
#include <stdio.h>
#include <string>
[Code]....
I'm trying to load a file input stream to load all the character content into a variable (say from a .java file for example), but for some reason whenever I type in the name of the file I want to stream I get the report: RUN FAILED (exit value 1, total time 2s)
Heres what I am suppose to do, So it doesnt seem hard to understand my messy code!
1. Gotta load the file "FactoryData.txt"
2. Load all values in my 2D array (array[5][3])
3. Print out the array to ensure that the copying went by well.
Heres my problem:
1. The for loops is REALLY off in my eyes. From my knowledge (correct me if im wrong), its suppose to be for(r=0;r<5;r++) not <=. BUT somehow im getting the results I want (in terms of formatting). HERE IS MY OUTPUT
Quote
300 450 500 510
510 600 750 627
627 100 420 530
530 621 730 200
200 50 58 100
100 83 4 5
Press Enter to return to Quincy...
I am doing a project in C++ - a simple data base (with "one table"). I want to build that data base using a LIFO or FIFO list, but this doesn't matter here
The only problem I have is that the structure of the data base is not "locked" in the code of the program, but when the program starts, it is "loaded / implemented" from a "configuration file" called "data.txt".
So the user, before she or he runs my program opens the file "data.txt" and writes the structure of the data base that se/he wants to create. This means that one time my program can be used to create a data base of students with fields such as "name / surname / gender / age / idnumber / university" but the next time it can be used for a data base of CD's with fields like - "author / release date / no. of tracks / etc.".
How to do that "loading" of a structure of a data base from a file, when the user runs my data-base creator (my C++ program).
I want to display a bmp file of resolution 600*420 (using c compiler like code block ) by manual loading. I tried to display the image by loading the pixel value. but this method has a limitation that it take up pixel value of image upto 64kb size.
So now i am trying to load it manually. What are the steps that i has to follow, what are the header files that i has to use ?
My system specification are windows xp professional , intel pentium 4 cpu. I don't know where to start ,does this method has any limitaton ,...etc ........
I am doing a project in C++ - a simple data base (with "one table").
I want to build that data base using a LIFO or FIFO list, but this doesn't matter here . The only problem I have is that the structure of the data base is not "locked" in the code of the program, but when the program starts, it is "loaded / implemented" from a "configuration file" called "data.txt".
So the user, before she or he runs my program opens the file "data.txt" and writes the structure of the data base that se/he wants to create. This means that one time my program can be used to create a data base of students with fields such as "name / surname / gender / age / idnumber / university" but the next time it can be used for a data base of CD's with fields like - "author / release date / no. of tracks / etc.".
How to do that "loading" of a structure of a data base from a file, when the user runs my data-base creator (my C++ program).
I'm struggling loading a class (and it's two derived classes) from an input file. I'm trying to create an array of class objects (and derived objects) and then load them based upon what is in the file.
Main class: Code: class Book
{
protected:
string sTitle;
[Code].....
Basically if the getline get's a P it's supposed to create a new object using the PrintedBook derived class and then store it to an array, if the getline get's to the "A" it's supposed to create an AudioBook object.
What I'm struggling with is writing something to parse the file line by line and create the objects on the fly and then store them into the array.
I've been making a multilayer game for a while and have a config that the game loads for the IP and stuff. I just recently put all the loading stuff into a function just so its easier to go through the code, but now the game isn't really working. It works fine on my computer connecting to the server myself, but when someone else tries to do it it seems like the game is working like it says the IP and everything from the config. When it tries to connect it either doesn't work or crashes just saying the program stopped working. Here is the code... I don't know if this is what is causing it to not work or something else.
string LoadConfig(int &loadPort, bool &fullscreen) {
string file;
string loadIP;
vector<string> fileLines;
fstream config("config.txt");
if (config.good()) {
[Code] ....
I am currently working on a project that requires me to "load the data in the file into array at the beginning of the program."
I have a text file with data, and I need to populate an array with the information. From then on, I am supposed to be able to add, display, and search that array. However, I can't figure out how to add the data from the file into an array. I was trying to find out how to search the text file itself. So it threw me off balance and I've been staring so long at the screen I can't really focus.
I want to load a file to rich text box component. I have this line:
richTextBox1->LoadFile("StudentaiRez.txt", RichTextBoxStreamType->PlainText);
But I get an error when I try to pass second parameter. It says : type name is not allowed.
I probably write it wrong, but I can't remember the correct way. In examples I only see that instead of -> dot is used, but it doesn't work either.
I am developing a win form application with sq l server2005, in client system after install the application I created the folder for storing the database of running application, like that I have every year database separately, My doubt is how to connect the particular year database while loading the app?
View 1 Replies View Related