Here is my source code i am trying to write a function (fillAll) to fill all 52 cards in a deck and i would like to use my data struct for the function and make Deck one of my parameters.
enum suit{HEARTS, CLUBS, DIAMONDS, SPADES};
enum face{TWO, THREE, FOUR, FIVE, SIX, SEVEN, EIGHT, NINE, TEN, JACK, QUEEN, KING, ACE};
struct Card{
suit suitType;
face faceType;
[Code] .....
I'm still new at C++, so my syntax might be a little off for getting the correct output. Currently, there are no compiler errors or warnings, but there is also no output when I run the program. It seems as if it is not calling something correctly maybe the .toString or perhaps my DeckOfCards constructor is a little off, either way, I can't seem to figure out why there is no output.
Anyways, here is my code:
Card.h
#ifndef CARD_H
#define CARD_H
#include <string>
using namespace std;
class Card {
[Code] ....
How to make a standard deck of cards and being able to shuffle and distribute the cards. I have made an array to store each card and I can display them but I assigned them all in order according to the suit and rank. Is this a viable way to do it if I intend to have a shuffle effect? Or should I create an array, randomly generate card, check for duplicates, then put them in the array, then display the array? Each card is a structure with two void pointer members for suit and rank.
View 1 Replies View RelatedI have a deck of 108 cards inside a 2D array and want to deal these card by 7 to 4 player. Each player had a id. The player and id are stored in a file while i've read in array each. Now I have to deal the cards.
Code:
struct card{
char color;
int rank;
char action[24];
char location[108]; Code: struct players{char name[10];
int id[5];
char hand;
};
Write a program to simulate a deck of 52 playing cards.
Represent your deck as a 2D Array where the value in the cell is the position of the card in the deck. Represent the names for the suits and faces as an array of Strings.
Write an algorithm to shuffle the deck.
Display the deck. For Example:
1 Jack of Spades
2 Deuce of Diamonds
3 Three of Diamonds
4 King of Spades
5 Eight of Clubs
6 King of Diamonds
7 Six of Clubs
8 Six of Spades
9 Eight of Hearts
Deal two hands of five cards each. For Example:
****** HAND 1 ******
Jack of Spades
Three of Diamonds
Eight of Clubs
Six of Clubs
Eight of Hearts
...
Below is what I have so far. Dealing two hands and displaying it. How would I be able to do that?
#include <iostream>
#include <ctime>
#include <string>
using namespace std;
void shuffle(int[][2]);
int main()
{
int j,deck[52][2];
[Code]...
Write a program to simulate a deck of 52 playing cards.
Represent your deck as a 2D Array where the value in the cell is the position of the card in the deck.
Represent the names for the suits and faces as an array of Strings.
#include "stdafx.h"
#include <iostream>
#include <string>
[Code].....
The problem: I am trying to connect the 1d arrays to the 2d arrays. Right now when I write: cout << deck[3][5] << endl; The output answer is 45. How do I populate the 2d array with the 1d arrays so that when I cout deck[3][5] I get it to say "Six of Spades"?
I am writing a console application that creates a shuffled deck of cards using pointers and arrays, but I get the error "Run-Time Check Failure #2 - Stack around the variable 'deck' was corrupted" What's the stack? What does this mean and what did I do to cause the stack to be corrupt?
#define _CRT_SECURE_NO_WARNINGS
#include "stdlib.h"
#include "time.h"
#include "stdio.h"
#include "conio.h"
typedef struct card{
int cval;
[Code] .....
My assignment is to create a program to print a deck of 52 cards, shuffle it, deal 2 hands of 5 cards, then print the deck after dealing the 2 hands with the cards that were dealt removed. this is my code so far...
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#define DECK_SIZE 52
void init_deck( int deck[] , int size ) ;
void shuffle_deck( int deck[] , int size ) ;
[Code] ....
I am having trouble dealing 2 random hands and how to print the deck with the cards removed.
The deck of cards so it is populated with all 52 cards. Once you have populated the deck, you need to shuffle the deck. Here is a simple algorithm you might consider for this purpose:
For each card up to the middle of the deck generate a random number modulus the size of the deck, swap the current card with the card at that location done
To implement this requirement you need to implement and use the following functions:
void initDeck(Card * deck);
I'm trying to sort a deck from file with merge sort.I have all my code working except merge sort function .
#include<iostream>
#include<fstream>
#include<stdlib.h>
#include<stdio.h>
using namespace std;
int temp;
int br = 1;
[Code] ....
This is a playing card deck creator and shuffler i made yesterday. It is very simple now, but i believe that it could easily be implemented into a card game program of some sort.
#include <iostream>
#include <cstdlib>
#include <cstring>
#include <ctime>
#define STANDARD_DECK 52
[Code] .....
I am trying to write a sub-program that takes a deck of 52 cards and will shuffle it up using this algorithm:
Start with n=51
Repeatedly:
Generate a random integer between 0 and n. Call it i.
Swap card i and card n in the deck.
Decrease n by 1
However the code that I've written,
vector<int> shuffleDeck(vector<int> deckVector)//deckVector is the original deck in order
{
int temp, n, i, s;
n = 51;
[Code].....
when I output the new vector, only produces this output(note- it is a random number every time, but it just repeats over and over):
8 8 8 8 8 8 8 8 0 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
8 8 8 8 8 8 8 8 8 8 8 8
or:
22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 0 22 22 22 22
22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22
I have a lstYourHand that has two cards in it, I loop through the listbox to get the values of both cards. I take the string value of the listbox item (strCardVal) and use a switch to give it an integer value (intCardVal). For some reason, when I run the code, the message Box at the end gives me the value 0 as a result, it does not register me giving it a value in the switch statement. My code is below:
Int32 intCardVal = 0;
String strCardVal;
Int32 intLoopCounter1;
for (intLoopCounter1 = 0; intLoopCounter1 == 1; intLoopCounter1++) {
strCardVal = lstYourHand.SelectedItem.ToString();
[Code] .....
I have an application in c# that i don't want it to connect to the internet in a virtual environment, like virtualbox, vmware virtual pc and so on. Therefore i though that disabling the virtual network card inside the virtual machine would be a good idea.
View 3 Replies View RelatedI want it to read 5 cards then display a text value
Code:
#include <stdio.h>
int main( void ) {
char inputtedhand[25];
[Code]....
I am working on a program that is supposed to eventually be able to evaluate bridge hands, but one of the first things I need to do is create and load an array. The program is supposed to read in hands from a file (each line in the file is a hand of 13 cards), evaluate these hands based on a list of rules, and display the results.
Here is the file that will be used for the program:
2C QD TC AD 6C 3D TD 3H 5H 7H AS JH KH
3C 4C 2D AC QC 7S 7C TD 9C 4D KS 8D 6C
2C 3C KC JC 4C 8C 7C QC AC 5C 9C 6C TC
5H 3S 4D KC 9S 3D 4S 8H JC TC 8S 2S 4C
2S 5D 6S 8S 9D 3C 2H TH
2H 6D %S 8S 7S 4D 3H 4S KS QH JH 5C 9S
2C QD TC AD 6C 3D TD 3C 5H 7H AS JH KD QS
2C QD TC AD 6C 3D TD 2C 5D 7H AS JH KD
2H 6D TS 8Z 7S 4D 3H 4S KS QD JH 5C 9S
I've gone through and wrote out what the program is supposed to do and what I think is needed and what steps to take to accomplish this, but am getting stuck on the array. If you can't tell I'm extremely new to this and am still learning. I'm not sure how to create and load an array like this since it seems to me there'd be two elements per index, a suit and a value.
Also, the instructions mention that I will need a data structure to hold the cards in an ordered manner. I'm really confused on this as well, if I'm using an array, how does the data structure come into play?
Can the data structure be used in place of the array?
Here is the code I have so far, but keep in mind that at the moment all it actually does is open the file (The "File is open" message will be taken out as the code progresses, I just threw that in there to make sure the file was actually being opened):
//#include <program3.h>
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
int main() {
char handsArray[];
ifstream bridgeFile;
[code]....
The input should be sorted by suit and the rank within the suit and be displayed in teh following format:
Clubs 10 6 2
Diamonds A Q 10 3
Hearts K J 7 5 3
Spades A
Points = 16
I'm gonna start a project for my own purpose. In my project I need to access GSM sim cards and send & receive messages through a PC interface. What kind of GSM Interface support for my Requirements and in feature may extend Requirements. what kind of programming language will be simple for write an pc interface to access that GSM interface device.
View 6 Replies View RelatedI am trying to seed a vector with 52 values ranging from 1 to 52. I already have the code written to seed the vector bu how to keep from repeating the same values from being seeded. This is for a five card stud game.
#include<iostream>
#include<cmath>
#include<cstdlib>
#include<string>
#include<vector>
#include<ctime>
using namespace std;
[Code] ....
so im trying to make a background for a menu, but it is only so big. its not the kind of picture where i can just reapply it. is there a function to make it fill to the screen?
View 4 Replies View RelatedSo this is my working code with sql i want convert it so i can read it from xml, basiccl i need to fill empty list with xml column BrivDat..
var connStr = @"Data Source=(LocalDB)v11.0;" +
@"AttachDbFilename=C:dbaseAdaPlus.mdf;Integrated Security=True";
List<DateTime> Holidays = new List<DateTime>();
using (SqlConnection conn = new SqlConnection(connStr))
using (SqlCommand cmdd = new SqlCommand("select * from Brivdienas", conn))
[Code] ......
I am using koolplot plot graph and able to plot two lines in a graph. My question is how to fill between the lines? Is it possible to do so with koolplot? or i should use another library?
View 2 Replies View RelatedWrite a menu driven program that will fill grid with values between 1 and 100. Begin the program by declaring a array of type int. Then present the user with the following menu
Enter 1 to add
Enter 2 to edit
Enter 3 to delete
Enter 4 to search
Enter 5 to display
Enter 0 to Quit
Each item of the menu must be implemented as a function. The program should Only allow values between 1 and 100
Always ask the user to apply coordinates for the cell to be changed
Flag an error when try to delete or edit a cell with a zero (0)
Flag an error when try to add to a cell that is not blank
Display the complete and nicely formatted grid when option 5 is selected
I installed FLTK 1.3.X (from here [URL] ...) on my visual studio 2012 compiler and use PPP book for programming (this: [URL] ..... ). My problem is about filling a Shape in. For example , this code:
#include <Simple_window.h>
using namespace Graph_lib;
int main() {
Simple_window win(Point(100,100), 1000, 600, "Binary_tree");
Graph_lib::Circle c(Point(200,200),50);
c.set_color(Color::red);
[Code] ....
When I run the program, All three Shapes are drawn but only the Rectangle is filled in! Why?
set_color works for the three and apparently the set_fill_color is defined for all Shapes and it too should work but why it doesn't work for Circle and Ellipse?
This is the .CPP and .h files [URL] ....
I'm working on a personal project, where I have a database (SQLite) and a dataGridView. Now This is what I have:
public Form1() {
DataSet ds = new DataSet();
SqlConnection connection = new SqlConnection(@"Data Source=testingsql2.s3db");
SqlDataAdapter SQLda = new SqlDataAdapter("Select * from User", connection);
SqlCommandBuilder SQLcb = new SqlCommandBuilder(SQLda);
dataGridView1.Fill(ds, "User"); //Error here
dataGridView1.DataSource = ds;
dataGridView1.DataMember = "User";
}
I've marked where I get the error.
And the Error description:
Error 1 'System.Windows.Forms.DataGridView' does not contain a definition for 'Fill' and no extension method
'Fill' accepting a first argument of type 'System.Windows.Forms.DataGridView' could be found
(are you missing a using directive or an assembly reference?)
I need to fill two 2D arrays, the first one with even numbers from 1 to 50, the second one with odd numbers from 1 to 50.
Code:
#include <iostream>
#include <ctime>
#include <iomanip>
using namespace std;
int main() {
srand(time(NULL));
[Code] ....
I'm trying to make a character array, and be able to custom fill it by using the scanf() function to ask the user for each character spot in the array.
Code:
#include <stdio.h>
int main() {
int i;
char character_array[11];
char *charpointer;
charpointer = character_array;
[Code] .....
And this is the output i get when i run it:
Code:
root@kali-Tulips:~# ./myown
what letter would you like in the [0] spot of the array? :
a
what letter would you like in the [1] spot of the array? :
what letter would you like in the [2] spot of the array? :
b
what letter would you like in the [3] spot of the array? :
what letter would you like in the [4] spot of the array? :
[Code] .....
Obviously I'm trying to grasp C programming and am very new. I don't understand why this isn't working, and i think its more than my lack of knowledge of C syntax. I believe the correct memory is allocated but when examined with gdb i don't find what i expect....