C# :: Get Posted File From Byte Array

Oct 7, 2014

I have an application that has its own embedded web server. I am trying to add jQuery/Ajax file upload capabilities to the application however, I am running into issues getting the posted file. The jQuery/Ajax portion is similar to this method here. Due to the way the webserver was written (its in a dll and I do not have access to the source), the posted file comes in as a byte[]. If I try to save the byte array directly to file using:

File.WriteAllBytes("path", ByteArray)

I end up with a corrupt file that I cannot open. I believe this is because the byte array also contains the posted file header info (Content-Disposition, name, filename, etc.). If I view the contents of the byte array using:

System.Text.Encoding.Default.GetString(ByteArray)
the header info can be viewed as:
------WebKitFormBoundaryQfPjgEVpjoWgA5JL
Content-Disposition: form-data; name="0"; filename="someimage.png"
Content-Type: image/png
‰PNG

Based on the selected file size and the size of the byte array, the entire file is in the byte array. How can I go about extracting and saving the posted file from the byte array?

View 2 Replies


ADVERTISEMENT

C# :: Reading A File Into A Byte Array?

Jun 25, 2014

I basically want to create a save editor application that will enable people to alter various values in the save by clicking on releveant buttons and then also for the editor to auto update the checksum when changes are done.

The save file is in hex so from what I can gather I would need to create a button to open the file using 'open file dialogue' and then read the file into a byte array so that the values can be called at any time when a particular butto is pressed and the application will then seek to the point in the file to make the required changes.

View 3 Replies View Related

C/C++ :: Separate Byte Of Array Into Nibble For New Array

Oct 1, 2012

How can I separate byte array and put nibbles in a new array?

when I try following:

byte in[]={0xab,0x11,0x22,0x33,0xbb}; 
byte out[10];  
void seperatebyte(byte* input, byte* output) {  
  for(int i = 0;i<sizeof(input);i++)  {   
        output[i*2]  = (input[i] >> 4) & 0xf;
        output[(i*2)+1]  = input[i] & 0xf;
     }  
}  

seperatebyte(in,out); //gives output of  

10 11 1 1 184 1 184 0 0 0

I expect 10 11 1 1 2 2 3 3 11 11

View 2 Replies View Related

C++ :: Byte Array To Double Conversion?

Dec 5, 2014

I'm trying to understand why a conversion from a byte array (unsigned char) to a double works when done one way and not antoher.

In the example code I test by hard coding an unsigned char array of the same bytes that the double consists of.

When I copy the bytes to a long long and cast to double the result is not the original double but if I use a struct the bytes can be set and the conversion happens.

Seems to me that both ways should work. I'd just like to know what is going on with the "struct way" that makes the conversion correct. I see in debugger that the bytes in memory are the same for piAsLong and u.bytes.

My compiler is VS 2012 and a long long and double are both 8 bytes (tested with sizeof). This is learning activity only.

Code:
#include "stdafx.h"
#include <iostream>
#include <iomanip>
using namespace std;
union {
double d;

[code]....

View 6 Replies View Related

C++ :: Convert 2-byte Array To Short Int?

Nov 18, 2012

I'm having trouble reading a block of bytes into a vector of short ints. My code is as follows:

Code:
FileStream.seekg(2821);
vector<short> g_Data;
int iter = 0;
g_Data.reserve(maxNumOfInts);

[Code] ....

The relevant block of data starts at offset 2821 in the file. Every two bytes are a signed short integer. What's odd is that it's giving me the correct results only part of the time. At offset 1052421 and 1052422 there are two bytes 40 and 1F that are correctly read in as 8000, but at offset 1052415 and 1052416 bytes 88 and 13 are read in as -120 instead of 5000.

I don't see anything wrong with my code, though, unless I'm misunderstanding completely how to convert an array of two bytes into a single float. Is my method correct? Better still, is there some way to just convert en mass an array of bytes into a vector of signed short ints?

View 5 Replies View Related

C++ :: Encoding Byte Array Data?

Apr 23, 2012

I'm trying to parse some binary data in the form of an array of bytes and I've come across something that is confusing me related to the representation of data as chars versus ints. It's a bit of a long story, but the byte array contains a mixture of character data and integer data which I' having trouble unravelling. The problem seems to arise from the issue below:

Code:
const char * ch_arr = "abcd";
const unsigned int * ui_arr = (const unsigned int*)ch_arr;
cout << ui_arr[0] << endl;
unsigned int ui = 'a';
ui = ui << 8;
ui |= 'b';
ui = ui << 8;
ui |= 'c';
ui = ui << 8;
ui |= 'd';
cout << ui << endl;

I expected both the output lines to be the same, since they contain the same bytes (I believe), but I get:

Code:
1684234849
1633837924

View 4 Replies View Related

C# :: Store Each Char Of A String Into Byte-array?

Apr 25, 2014

I am trying to store each char of a string(string a ="1100") into a byteArray ( byte[] byteArray = new byte[4]. its not showing any error but its storing like below:

byteArray[0] = 49
byteArray[1] = 49
byteArray[2] = 48
byteArray[3] = 48

and what i want is

byteArray[0] = 1
byteArray[1] = 1
byteArray[2] = 0
byteArray[3] = 0

I don't know why but its replacing 1 with 49 and 0 with 48.what am I doing wrong or how to do this?

my code is as below

byte[] byteArray = new byte[4];)/>
int binArrayAdd = 0;
string a ="1100";
foreach (char Character in a)
{
byteArray [binArrayAdd] = Convert.ToByte(Character);
binArrayAdd++;
}

View 4 Replies View Related

C Sharp :: Byte Array To Char Conversion

Jul 26, 2012

- API Function

TestSend(ref char data, ref int len, char slot);
---------------------------------------------------
 Byte[] IccSelect = new Byte[7]{
                              0x00,    
                              0xA4,    // INS 
                              0x04,    //1                              0x00,    //2                              0x0E,    
                              0x31,    
                              0x50,    
                              };  
Int32 len = 20;

TestSend(ref ??, ref len, '0');//byte array to char conversion

View 1 Replies View Related

C Sharp :: How To Extract A String From Byte Array

Feb 11, 2014

i need to search for a keyword in a binary(.raw)file and have to extract the characters(until a '&' character is found)that immediately following the keyword .

View 1 Replies View Related

C Sharp :: Write Byte Array To Textboxes?

Jan 22, 2015

In my application there is a structure that holds 200 parameters for 200 tests. These structure is converted to byte array . I want to write this byte array to a file in save button and when I click open button, this file must open and write these bytes to corresponding text boxes. How it possible.?

View 1 Replies View Related

Visual C++ :: How To Convert PNG Image Into Byte Array

Mar 12, 2013

I m loading a png image by using the ATLImage library.

CImage Image;
Image.Load (L"D:ImagesPNG_ImagesImage7.png");

how to retrieve the byte array value of this png image. I tried retrieving it as

byte *png = reinterpret_cast<BYTE *>(Image.GetBits());

but when i access the data , der is a loss of data while converting it in the above manner.

I found a snippet in net for decoding the raw data . but der is a line is the code which is unknown to me. The code is as follows :

CImage atlImage;
HMODULE hMod = GetModuleHandle(NULL);
atlImage.Load(bstr);
void* pPixel = atlImage.GetBits();
intpitch = atlImage.GetPitch();
intdepth = atlImage.GetBPP();

[Code] ....

How do I get the byte * value form the png image loaded?

View 3 Replies View Related

Visual C++ :: Draw Image Using 2D Byte Array?

Feb 8, 2013

I like to Draw an Image Using two dimensional byte array[512][256].

I used SetPixelV method to plot the image.

But Its very slow & hidden some buttons(Controls) at run time in the same dialog.

For reference i send some code,

Code:
for(row = 0; row <512; row ++)
{
for(col = 0; col < 256; col++)
{
Data[row][col] = y;
SetPixelV(d, 10+row, 10+col, RGB(Data[row][col],Data[row][col],Data[row][col]));
}
}

View 14 Replies View Related

C++ :: Variable To Byte Array Converter Class?

Aug 18, 2012

I've been working on making a class that makes turning any variable or object into a byte array and vice-versa, quick with minimal pointer interface.

As well as a function for turning any variable or object into a binary text string.

Code:
#include <iostream>
#include <bitset>
#include <sstream>
// Convert a Variable to a Byte Array
template <class var>
unsigned char* VarToBytes(var &data) {

[code].....

View 2 Replies View Related

C++ :: Storing A String In Byte-array Form?

Jun 6, 2012

I am trying to use C# with C++, two different applications that work together.

In C# it is easy to get a byte array out of a string, by just using Encoding.Default.GetBytes(of-this-string);

I can pass bytes to my C++ program by just writing in the embedded resources. But this won't allow strings, as far as I know it can only be a byte array. C++ reads the embedded resources a LPBYTE.

So I try to send the string or message in byteform.

However the problem in C++ is that there is no Encoding.Default.GetString(xxx)

Would there be any other ways to send a message/sentence in bytearrayform and request it in C++ back to the original string?

View 14 Replies View Related

C++ :: Binary IO - Read 4 Byte Int From A File

Feb 26, 2012

Trying to write very simple code to read a 4 byte int from a file.

code:

int tester;
FILE *fp;
fp=fopen("/home/bdluser/skeleton.blx","rb");
fread(&tester,sizeof(int),1,fp);
printf("tested 1 byte read should be 1: %i",tester);

I have tried editing the binary file....it outputs similar large numbers

00000000000000000000000000000001 outputs 808464432
0x00000001 outputs 808482864
0x10000000 outputs 808548400
10000000000000000000000000000000 outputs 808464433
x01x00x00x00 outputs 813183068
x00x00x00x01 outputs 813183068 same....

etc.etc. It just keeps returning the same large integers. I thought they were memory addresses but its consistent output/input so I guess not.

View 2 Replies View Related

C# :: Create Byte Array From IntPtr Without Copying Data

Apr 18, 2012

let's say I have an IntPtr that points to the raw data of System.Drawing.Bitmap. is there any way to create a byte array from that IntPtr without copying the data? I'm a pretty experienced C++ programmer, so I can call ToPointer() on it and convert to a byte* to work with it as a pointer, which is no big deal for me, but using a pointer and doing pointer arithmetic increases the risk of bugs, so I'd prefer not to do it that way if there's another way.

View 4 Replies View Related

C/C++ :: How To Convert Byte Array With Hex Number To Equivalent Decimal Value

Sep 18, 2012

I tried to convert byte array with hex to equivalent decimal value as follows but it gives me unexpected results:

byte hex_arr[] = { 0x00, 0x01, 0xab, 0x90};
unsigned long i=0;
i = hex_arr[3] + (hex_arr[2] << 8) + (hex_arr[1] << 16) + (hex_arr[0] << 24);
the output is 4294945680
Correct output should be 109456

but when I try with byte hex_arr[]={0x00,0x00,0x0f,0xff};

it gives correct out put 4095

the correct output works until the hex values is {0x00,0x00,0x7f,0xff}

View 8 Replies View Related

C++ :: How To Pass Constant BYTE Array Declared In Function As Parameter

Apr 20, 2013

I have this code:

const BYTE original[2][4] = {
{0x00, 0x00, 0x00, 0x00},
{0xFF, 0xFF, 0xFF, 0xFF}
};
void function(const BYTE** values){

[Code] ....

You might notice that the above code doesn't compile, this is the error:

cannot convert parameter 2 from 'BYTE [2][4]' to 'BYTE *'
1>
Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast

Even after some search I couldn't really find an answer to my problem, how do I pass the const BYTE array which I declared above in the function as a parameter (or what structure do I need to set for the function as a parameter)?

View 10 Replies View Related

Visual C++ :: Processing Time For PVOID Into Byte Array Conversion

Mar 12, 2013

In my project I'm using PVOID pointer to store real time data. After getting this data I will convert the data into byte array, like below

Code:
byte *bPoint = NULL;
PVOID pvData;
byte TempArr[1024];
bPoint = (byte*) pvData;
for(int i=0;i<1024;i++)
TempArr[i] = (byte) (*bPoint + i);

Processing time for the above code takes 9500 to 9900 microseconds (Used QueryPerformanceCounter).

Code:
TempArr[0] = ((BYTE*) pvData) [0];

This code takes 1100 to 1200 microseconds. My doubt is, The processing time of PVOID data into byte array conversion takes time like above? Or any other easy way(PVOID data into byte array conversion) to reduce the processing time?

View 14 Replies View Related

C++ :: How To Read A Bit From A Byte

Mar 30, 2013

What is the most efficient way to read a bit at a particular position in a byte?

View 13 Replies View Related

C++ :: String To Int To Byte?

Aug 16, 2014

Right now im creating a program that use xbox inputs and then send out keyboard functions using sendInput();

It works fine, but now im creating a system wich lets the user of the program change the settings in a textfile. Wich will then change what the controllers bindings are.

example, if settings.txt says: Y=button(0xIE)

i want the program to know that when xbox button Y is pressed, execute a sendInput function to the Key: A (0xIE).

The problem is that the virtual keycode (0xIE) i take from the settings.txt is stored as a string (lets say it is stored in string Y_event)and input.ki.wScan has to be of type BYTE. i made a function wich changes string into int. (because input.ki.wScan seems to be fine getting a int?)

int stringToInt(string insert) {
char back[20];
for(unsigned int e=0;e < insert.length();e++) {
back[e]=insert[e];
} return atoi(back);
}

but when i run the code nothing happend...

In the code i have a function wich executes the keypress: void pressbutton(int key, int time)

when i send in the converted string it doesn't work but when i send in: (0xIE) it works.

pressButton(stringToInt(Y_Event),50) // doesn't work
pressButton(0xIE,50) // works

focus on the last part that i wrote.

View 3 Replies View Related

C++ :: Most Efficient Way To Read A Bit From A Byte?

Mar 30, 2013

What is the most efficient way to read a bit at a particular position in a byte?

View 3 Replies View Related

C/C++ :: Returning Byte Value From Memory?

Mar 16, 2014

I'm trying to get the current time for a game and print that to the games chat window. I'm already injected into the process do I don't think I need ReadProcessMemory.

The value i'm trying to read is the game hours 1-12.

//doesn't work
byte time_hour_get ( void )
{
return *( byte *)0x00B70153; //the address to the memory containing the
}

addMessageToChatWindow((char*)time_hour_get); -> when I call this function it looks like s , . I want it to return the integer value like cheat engine. I used byte when scanning for this address

View 1 Replies View Related

C :: Byte Ordering In Binary Buffer

Apr 13, 2014

Basically it has to do with the byte ordering in a binary buffer vs the typing of a variable used to hold it.

To give you an example, if I have a buffer (say of indefinite length), and a ptr "ptr" pointing to a byte in the buffer (say, C0), such that if I open the buffer in a binary viewer it reads like this: Code: C0 DD FE 1F Such that this is true:

Code:
/*ptr is uint8_t*/
*ptr == 0xC0

Then I do this:

Code:
uint16_t var;
var = *(ptr+1);

I would expect the result to be:

Code: DD FE /*56830*/

Though if I print that out with:

Code:
printf("%u
", var);

It'll print:

Code: 65245 /*(FE DD)*/

Now obviously it's byte swapped, but what is causing that? I'm assuming if I just stream that out to a file byte by byte it'll be fine, so it's something with the 16 bit data type (also have seen this issue with a 32 bit data type, where all 4 are in reverse order). Is there any way to 'fix' it except bit shifts & masks?

View 14 Replies View Related

C :: Locations In The RAM Addressed Per Word Or Per Byte?

Sep 20, 2014

Are locations in the RAM addressed per word or per byte? I am using a 32 bit machine, so I think that it means that on my PC a word would be 4 bytes.

View 11 Replies View Related

C# :: Reading Byte From Serial Ports

Jun 8, 2014

how to use this function:

ftStatus = myFtdiDevice.Read(readData, numBytesAvailable,ref numBytesRead);

to read byte from the serial port.This function is part of the DLL that came with the chip(FT2232D) I am using on my board.I want to use the function to read a byte from the serial port and then send the value to the Graphic user interface.Unfortunately I was unable to get the expected value on my GUI.If I send for instance 40,what I get on the GUI are letters instead of the number 40 or at times the GUI will not even respond.Below are my lines of code I used to read the byte from the serial port:

The following instructions are executed whenever the CHECKBOX is checked

private
void checkBox1_CheckedChanged(object sender, EventArgs e)
{
UInt32 numBytesRead = 0;

[Code].....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved