Visual C++ :: Showing Row And Column Totals?
Apr 24, 2013
Trying to show the Row totals and the Column totals.
#include <stdio.h>
int main() {
/* start of main */
#define NUMROWS 5 /* establishes NUMROWS as 5 */
#define NUMCOLS 5 /* establishes NUMCOLS as 5 */
int val[NUMROWS][NUMCOLS] = { {23,06,85,22,01}, /* declares array val to have 5 rows and 5 columns */
{07,33,62,17,04},
[Code] ....
I receive this message after building:
1>------ Build started: Project: WA 4 A 1 Christopher Caron, Configuration: Debug Win32 ------
1> WA 4 A 1 Christopher Caron.cpp
1>c:userschrisdocumentsvisual studio 2010projectswa 4 christopher caronwa 4 christopher caronwa 4 a 1 christopher caron.cpp(21): error C2106: '=' : left operand must be l-value
[Code] .....
View 2 Replies
ADVERTISEMENT
Sep 19, 2014
My code is below:
Total Interest ends up as my last Monthly Payment amount instead of adding up all Interest Paid - What am I doing wrong?
Total Paid isn't calculating correcly either - What am I doing wrong?
I suspect both are very similar problems. I've tried several different calculations, but cannot figure this out.
#include <iostream>
#include <cmath>
using namespace std;
double GetMonthlyIntrest (double OpenBalance,double rate);
bool ContinuePgm();
int main () {
double StartingBalance,rate,amount,OpenBalance,IntPmt,TotalInt=0.0,GrandTotal=0.0;
[code]...
View 3 Replies
View Related
Jan 21, 2013
I am looking to create a table somthing like this output below but I am very new to this and my code is abit everywhere.
x sqrt(x) x ^ 2 x ^ 3
========================================
1 1 1 1
2 1.414 4 8
3 1.732 9 27
4 2 16 64
5 2.236 25 125
6 2.449 36 216
7 2.646 49 343
8 2.828 64 512
9 3 81 729
10 3.162 100 1000
========================================
Totals: 55 22.47 385 3025
========================================
This is the code I have I have got it to cal some of the values but numbers our everywhere. I am doing more Trial and error than anything.
#include "stdafx.h"
#include <iostream>
#include <cmath>
using namespace std;
[Code].....
View 8 Replies
View Related
May 17, 2014
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
[Code]....
I know it has to do with the array, and I've tried over and over again to fix my issue and nothing has worked thus far.
View 3 Replies
View Related
Jan 25, 2013
I need coding this project using while loops and cout/cin.. It is suppose to be one while loop for the whole thing and inside of the first while loop is the second while loop for each sale separately.
You have been asked to write a program to calculate sales totals for a general store. Your program will not know how many products each customer will buy, so your program will have to repeat the process until the last product has been entered (use -1 for Product ID to end each sale). After each sale your program must ask if you want to do another sale (Y - continue, N - end program).
At the beginning of the day, the cash drawer has $500 in it. At the end of the program you must display how much money is in the drawer after handling all your sales transactions.
Input
Your program must take the following input:
- Product ID Number (int)
- Quantity for each item purchased (int)
- Cash Received at the end of the sale
Use the following dataset to determine the price and taxability for each item.
First Sale:
Product ID Price Quantity Taxable
101 $65.00 2 Yes
102 $12.50 1 No
103 $24.50 5 No
104 $38.75 4 Yes
105 $17.80 6 Yes
106 $16.50 2 No
107 $42.85 8 Yes
108 $32.99 2 Yes
109 $28.75 1 Yes
110 $51.55 1 No
Second Sale:
Product ID Price Quantity Taxable
102 $12.50 1 No
103 $24.50 1 No
106 $16.50 1 No
107 $42.85 1 Yes
108 $32.99 1 Yes
109 $28.75 1 Yes
Third Sale:
Product ID Price Quantity Taxable
106 $16.50 4 No
107 $42.85 3 Yes
108 $32.99 1 Yes
109 $28.75 5 Yes
110 $51.55 2 No
Calculating Tax
For those items that are taxable, assume a 7.5% sales tax. Be sure to keep a running total of tax for the each sale.
Getting Started
You must use the starter file provided with this assignment.
What to turn in:
- A copy of your source code
- A printout of your program's output
View 2 Replies
View Related
Oct 31, 2014
Is it possible to show a console window in a Win32 DLL?
View 3 Replies
View Related
Dec 26, 2014
Im working on my project for college and i want to know how to add sth similar to a chronometer for user to see how much time have passed while entering some characters using cin.getline function.
View 2 Replies
View Related
Nov 25, 2013
The program is showing zero in output section ....
Code:
#include <iostream>
#include <cstdio>
#include <fstream>
#include <string>
#include <iomanip>
using namespace std;
const int SZ = 55;
[Code] ....
The output:
Code:
First Last Employee Hours Rate Regular Overtime Gross
Name Name Number Worked of Pay Pay Pay Pay
==============================================================
Jane Adams A1234 40.00 10.00 0.00 0.00 0.00
Mary Lincoln L8765 50.00 10.00 0.00 0.00 0.00
Martha Washington W7654 25.50 10.85 0.00 0.00 0.00
John Adams A9876 52.00 15.75 0.00 0.00 0.00
George Washington W1235 45.00 25.00 0.00 0.00 0.00
Abraham Lincoln L9087 40.25 55.00 0.00 0.00 0.00
William Tell T9876 30.00 9.75 0.00 0.00 0.00
View 12 Replies
View Related
Jan 8, 2014
My problem is ToolTips are not shown if any of the tool-bar menu items is disabled/inactive.
They are shown when all tool bar menus are active/enabled.
I am using TTS_ALWAYSTIP while creating Tool-Bar.
What to do to enable/display tool-tips always.
View 5 Replies
View Related
Jan 31, 2013
I am trying to populate a list control with the filename and maybe some other thing when i push the OK button....
Code:
void CThisDlg::OnOK() {
int iItem = 0, iActualItem = 0;
HANDLE hFind;
WIN32_FIND_DATA data2;
int iNum = 0;
hFind = FindFirstFile("*.*", &data2);
[Code] ....
When i push ok, no files get loaded. I also attached a image
View 13 Replies
View Related
Mar 26, 2013
Is there an easy way to create a column of buttons ina listView?
I need that every file of the listView has a button in the first cell. Is that possible?
View 2 Replies
View Related
Mar 27, 2013
If we work with a ListView,and want implement some functions like OnLBDblClick(), we only have a CPoint, but not the column and row that this point suppose. How can i Know that, is there another type of functions that gave us the row and column?
View 2 Replies
View Related
Jul 8, 2013
I am using a CEdit control as a child in a CListCtrl for purpose of making each column editable. The application is a dialog based app. My problem is... I have overwritten OnOK and OnCancel in the main dialog so the edit control never receives notifications for Escape or Enter whether in OnChar or PreTranslateMessage and I would like to delete the CEdit control after updating the CListCtrl on Enter. What can I do? I have rewritten this code many many times over the past 4 days and nothing is working.
View 4 Replies
View Related
Mar 5, 2014
'm new to programing and I'm trying to get this program to add up a price of coffee to the add on extras such as cinnamon, etc. But once the program runs it doesn't add up the coffee price with the extras and I've been at it for hours...
Code:
#include <iostream>
#include <cstdlib>
using namespace std;
int main()
[Code] ......
View 6 Replies
View Related
May 17, 2014
The code is supposed to display the total and averages of the data as well, but cuts off due to an error in the code. The code should also:
1)Print checks for all employees, one per page, sorted by lastname. The first check number, 100, is to be read from a company data file (see requirement 4). The border of each check is important and should not be omitted.
2)Convert the net pay to a text string for each check printed.
3)Print a reference code on each check. The reference code is obtained by combining the first letter of the lastname with all the consonants remaining after removing all vowels (a,e,i,o,u).
4)Use the same employee data found in assignment 2. Use the following company data, obtained from a text file,
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
[code]....
And here's where the program stops. URL.....
Output I'm expecting: Program to display totals and averages (worked before I turned everything into an array), now exits with error before totals/averages are displayed. Program also writes up a report.txt file that also writes this information into it, as well as using a quicksort to organize the names alphabetically, and print paychecks (all of the #BORDER, #HEADER1-8, #STUB, etc). In that check a reference code is also generated (teacher gave us code, we just had to modify for our final program as seen here)
Flow of the program: Print headings to label all of the input data we will enter soon under the categories as listed in the heading. Initialize all of our totals (in our array) to value of 0. These will be added in a loop "AddAccumulators" which takes our value for the hours, payrate, and taxes from each employee array structure and adds it to the total array. Program will write this information into the report.txt file with the HEADER line for totals, and should be displaying it in that picture. (Same for averages). After all of the data is calculated, the Reference code, Totals, Averages, and individual employee data is taken and put into printing out a Check Header and Stub.
View 10 Replies
View Related
Oct 10, 2014
Why this program won't correctly print the proper totals on screen? See my code and the included screenshot.
Code:
#include <stdio.h>
int main(void) {
int total, first, second;
printf("Enter 2 numbers:
[Code] .....
View 4 Replies
View Related
Jun 8, 2014
I am doing a modification to a school project call rainfall statistics. I have that written, but need to sort the array and list rainfall totals from highest to lowest. I thought I knew what I was doing but I am having some difficulty locating all my errors, the error I keep getting now is:
1>------ Build started: Project: Rainfall Statistics Program, Configuration: Debug Win32 ------
1> Rainfall-main.cpp
1>Rainfall-main.cpp(88): error C2601: 'sortHighest2Lowest' : local function definitions are illegal
1> Rainfall-main.cpp(25): this line contains a '{' which has not yet been matched
1>Rainfall-main.cpp(96): error C2065: 'TOTAL_NUM_OF_MONTHS' : undeclared identifier
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
Below is my code, I know i'm missing something, just can't see it.
#include <iostream>
#include <iomanip>
#include <string>
using namespace std;
//Here are the function prototypes
double getTotalRainfall(double[], int);
double getAverageRainfall(double[], int);
[Code] .....
View 2 Replies
View Related
Jan 19, 2013
SLD_ttf lib and I have been following the Lazy Foo' tuts on it but the text is not appearing. I have found out that it is not loading the font as I have added in the code saying if it has failed.
Code:
font = TTF_OpenFont( "lazy.ttf", 28 );
if( font == NULL )
{
return false;
}
i have saved this font in the project (project name/project name/lazy.ttf).
View 19 Replies
View Related
Jul 1, 2013
I am trying to display images on top of my Background image gui, so like buttons an stuff but the problem is that there not showing ontop. I can only get one of them to show
// includes
#include <windows.h>
#include <stdio.h>
#include "res.h"
// defines
#define LWA_COLORKEY 0x00000001
#define LWA_ALPHA 0x00000002
[Code] ....
View 1 Replies
View Related
Dec 7, 2013
I've run across this issue before, but for the like of me, I can't figure out what keeps causing it. The problem compiles and runs as expected; however in the salaried object (Employee #1 in main.cpp) the console displays the number of vacation days as -858993460 instead of the value entered.
The parent Employee class is abstract with calculatePay() and displayEmployee() being pure virtualls and with a Benefits, Salaried, and Hourly class derived from it.
The Salaried displayEmployee() and the portion of the Main.cpp that contains the salaried object follows. What causing this?
Salaried displayEmployee()
Code:
void Salaried::displayEmployee()
{
cout << endl;
cout << "Employee Information" << endl;
cout << "----------------------------------" << endl;
cout << "Employee Name: " << setw(7) << FirstName << " " << LastName << endl;
cout << "Gender: " << setw(12) << Gender << endl;
[Code] .....
View 2 Replies
View Related
Oct 6, 2014
I just checking but confused with float. in that code same size int, and same type double are working but float showing nothing in printf..why?? i'm using GCC compiler int 32bit win7 os
Code:
#‎include <stdio.h>
int main() {
char arr[10] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9' };
printf("Size of char=%c
", ((char *) (&arr[0]))[1]);
[Code] ....
View 14 Replies
View Related
Feb 19, 2014
As part of a project i want to display the speed of a small wheel on a 7 segment display. I am using a hall effect sensor to pick up the pulses of the rotation. I am not sure how to write a programe on C to calculate the RPM from this....
View 4 Replies
View Related
Nov 26, 2013
#include <iostream>
#include <cstdio>
#include <fstream>
#include <string>
#include <iomanip>
using namespace std;
const int SZ = 55;
[Code] ....
View 1 Replies
View Related
Nov 21, 2014
My question is why my on my code there is 10 zip code and i want to show the first digit, the problem is the first digit does not match the zip code for example the zip code is 45805 it should be '5' however, my code shows other number!
#include <iostream>
#include <stdio.h>
#include <stdlib.h>
[Code].....
View 4 Replies
View Related
Nov 19, 2013
i have been making code of a chessgame and now sddenly computer freezed and now there's not code in .cpp file! Although my .cpp file shows size of 16kb but when i open it . there's nothing except bank file
View 1 Replies
View Related
Feb 7, 2014
I'm programming tic tac toe but the board is not showing numbers, and it is simply stating the winner without any input: (the win conditions are not complete, but it shouldn't matter).
#include <iostream>
#include<string>
using namespace std;
//Write a two-player tic-tac-toe game; use enums when possible to represent the values of the board
char ticBoard[3][3];
char board[10];
void showBoard();
bool moveIsValid(int m);
int whoWon(); // 0 tied, 1 p1, 2 p.2
[Code] ....
View 6 Replies
View Related
