I am programming in c++ with 'winpcap' . I read a .pcap file and after I want to get the source and destination of packets in that file. Here is a piece of my code:
I want to read and write value on serail port to Microcontroller with MFC. The MFC have no serial port tool like in VB Professionnal edition. I try to find MFC connect serial port example but I not found. If you have good example for read and write on serial port with MFC
I am making a MFC application with VC++2012 with receiving data from Serial Port and the data is stored in a Listbox, then after processing (convert into numbers) and get these data to draw a sine wave on the chart. (I intend to make a virtual oscilloscope).
Everything works ok at the beginning, but after receiving about 300 items or above (in the Listbox) the value seem stucking (or lagging) and work very slowly.
I receive data by the SerialPort_DataReceived() method, and process of converting and drawing chart also in this method, I think this makes the system overload!!
I have a socket connection already set up, my thing is what would be the best way to send a packet through sockets? My teacher wants us to convert the packet to bits first before we send it. I think he wants something like this:
Code: struct packet{
int header int message int flag
}clientpacket; m
My question is how do we covert this to bits, before sending it. One of my friends said we can create a char[] array the size of the struct as a buffer. will memcpy() change the struct to bits if I copy it to the buffer?
this is how is suppose to look in bits for the header field/column.
Field : header Field size(bits): 8 data format: Unsigned int value example: 1 Value in bits: 0000 0001
I am confused, I think I send a structure over the socket but I did not convert it to bits before I sent it .
This question is kind of a continuation of Winsock Sending X264 Nal Unit. I was finally able to solve that problem, turns out in the end I was missing a memcpy(). Now my current issue is, when I try to decode the received packets, I am shown a bunch of errors. I have attached a picture with my decoding errors. So since I am using a reliable multicast socket, which doesn't guarantee order of delivery. My initial thought is that I am getting packets out of order.
So my question is, how would I attach a packet header to my current data? Could I get away with sending the header separately? Similar to what I am doing with the nal length. If I do attach my header to the packet data, what is a good way to delimit the two?
My client is just reading packets into a vector, because decoding it right away was too slow. So I thought that might have been an issue, so I decided to read in 200 packets just for testing purposes.
I am using libserial library to communicate through the serial port in c++. the linux cpu is communicating with a modem through the serial port. basically this is what i want to do
Code: //I want: cpu to write command_1 to modem Wait for the answer from modem read serial port check if command successful (i.e modem sends OK if successful and ERROR if there is an error)
If there is an error, resend command_1
if successful then Write command_2 to modem Wait for answer read again serial port check if command is succesful (modem again sends OK if successful and ERROR if there is an error) basically, this is the code...
Code: serial_port <<command_1 <<' '; //send 1st command sleep(2); //delay a while
I have a Voltage Range from -10V up to +10V, which I transform to a voltage Range 0V to 5V, with the schematic i've attached, so I can use the A/D converter of my ATMEGA32 processor.
Now I'd like to write the value of the Input Voltage (which moves in the Range of -10V to + 10V) on the serial port, but i don't know how i should calculate this factor. At the moment, I can only write the value of the A/D Converter Input on the serial, but this is only 0V to 5V...
Explain me a working code to read and write a file using serial communication.and i need to store that file.I know normal file handling in C, but how it is through serial port i am not getting.
In my project i have a serialport control and a button, there is no error but i want to know how actually this works, i want to send and recieve the data from the serial port don't know how to do it..
I am doing a messaging application using Visual C++ window form application.
Sometimes I can't receive a whole message from the sender. If i type short sentence like "123456", it can be shown properly. But, if i type a quite long sentence like "123456789123456789", it can't shown a correct message, can't show exactly the whole message.
here is my code:
//transmission: String^ message; String^ message1; String^ name = this->serialPort1->PortName;
to read byte from the serial port.This function is part of the DLL that came with the chip(FT2232D) I am using on my board.I want to use the function to read a byte from the serial port and then send the value to the Graphic user interface.Unfortunately I was unable to get the expected value on my GUI.If I send for instance 40,what I get on the GUI are letters instead of the number 40 or at times the GUI will not even respond.Below are my lines of code I used to read the byte from the serial port:
The following instructions are executed whenever the CHECKBOX is checked
How to send a keystroke or a mouse event to another running process in Ubuntu? I want to write a C program that reads data from the USB port sent by AVR Micro Controller board continuously.In response to that it checks the data received and sends a command to another process running on the computer? Example,when the program reads 101 from the USB port it sends left mouse button down to the VLC media player window that is currently running?
i have problem i make code that take data from serial com port for weighting machine it is ok working but it recieve data in more lines.I try to make it receive data in one line In code below i need to take weight fro weight bridge machine automatically by timer in visual studio 2005.it works but receive weight values in more lines. I need to receive weight in one line and automatically updated then convert t to integer
I would like to handle the response such that if the response is OK, the modem sends another command and if the response is ERROR, the modem resends the first command.
using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; using System.IO; using System.IO.Ports;
[Code] ....
How to pick date / time when serial port starts reading , and also when reading stops ?
I have a class which I wrote and one of its object is "SerialPort" .NET class. In my MainWindow I created instance of my class called "SerialPortComm", then I send through some functions of mine, commands to the Serial Port, and I receive answers through "DataReceived" event.
But when I trying to use Dispatcher.BeginInvoke to write my data I have received (successfully), nothing shows on the RichTextBox which I'm trying to write to.
What can caused that, and How I can make it works?
SerialPortComm.cs
public partial class SerialPortComm : UserControl { public SerialPort mySerialPort = new SerialPort(); public void Open_Port(string comNumber, int baudRate) { mySerialPort.PortName = comNumber; mySerialPort.BaudRate = baudRate;
I captured packet that is sended to server then that button is clicked
POST (info hided)/amfgateway.php HTTP/1.1Host: (info hided) Connection: keep-alive Content-Length: 52
[Code].....
It apears that this is AMF(Action Message Format) type packet Content-Type: application/x-amf it is in binary and this complicates things a little because I cannot send it with regular httpwebreqeuest class(Or I think so)
I used Fiddler4 with AMF plugin to check what data was passed with that packet
It apears that these numbers under content / 0 are User-id that is needed to add user to friends
I did a research with little success finding any usefull examples. I just found that there is a library for FLEX/FLASH remoting called fluorinefx and this should do the job but when I opened documentation it seems little too complex for me.
The project is about reading data from PIC and display the data on the dialogue created by the MFC GUI of Visual studio 2010. There are 4 data need to be displayed (2 weight and 2 angle). the data will be display on the edit control box on the dialogue.
I have try to solve the COMPort and Readdata issues many times, but I'm fail. I have read many sources and implement the source codes... They are never work....
The detail about the issues that I need to solve is clearly mentioned on the main dialogue.cpp. Take a look to an uploaded zip file that I have attached.
I habe a program, that can send and receive UDP Multicast telegrams. When I open the socket then I bind my multicast group address and the local port to a specified networkcard (our PC has 2 network cards). Now I have a special constellation:
Our PC has 2 network cards. Multicast group 1 shall use card 1 and group shall use card 2. As long as both groups use different local ports it works fine. But when both group want to use the same port number then I can receive and send telegrams only through the first group that was created. For the second one I don't even get a FD_READ event at all.
Code: SrvAddr.sin_family = AF_INET; SrvAddr.sin_port = htons( (WORD) nLocalPort ); SrvAddr.sin_addr.s_addr = inet_addr(strOwnIpAddress); // bind multicast group socket to a specified networkcard // If bind socket to port failed if( bind( hSocket,
