I am using libserial library to communicate through the serial port in c++. the linux cpu is communicating with a modem through the serial port. basically this is what i want to do
Code: //I want: cpu to write command_1 to modem Wait for the answer from modem read serial port check if command successful (i.e modem sends OK if successful and ERROR if there is an error)
If there is an error, resend command_1
if successful then Write command_2 to modem Wait for answer read again serial port check if command is succesful (modem again sends OK if successful and ERROR if there is an error) basically, this is the code...
Code: serial_port <<command_1 <<' '; //send 1st command sleep(2); //delay a while
I have a Voltage Range from -10V up to +10V, which I transform to a voltage Range 0V to 5V, with the schematic i've attached, so I can use the A/D converter of my ATMEGA32 processor.
Now I'd like to write the value of the Input Voltage (which moves in the Range of -10V to + 10V) on the serial port, but i don't know how i should calculate this factor. At the moment, I can only write the value of the A/D Converter Input on the serial, but this is only 0V to 5V...
Explain me a working code to read and write a file using serial communication.and i need to store that file.I know normal file handling in C, but how it is through serial port i am not getting.
In my project i have a serialport control and a button, there is no error but i want to know how actually this works, i want to send and recieve the data from the serial port don't know how to do it..
I am doing a messaging application using Visual C++ window form application.
Sometimes I can't receive a whole message from the sender. If i type short sentence like "123456", it can be shown properly. But, if i type a quite long sentence like "123456789123456789", it can't shown a correct message, can't show exactly the whole message.
here is my code:
//transmission: String^ message; String^ message1; String^ name = this->serialPort1->PortName;
I want to read and write value on serail port to Microcontroller with MFC. The MFC have no serial port tool like in VB Professionnal edition. I try to find MFC connect serial port example but I not found. If you have good example for read and write on serial port with MFC
How to send a keystroke or a mouse event to another running process in Ubuntu? I want to write a C program that reads data from the USB port sent by AVR Micro Controller board continuously.In response to that it checks the data received and sends a command to another process running on the computer? Example,when the program reads 101 from the USB port it sends left mouse button down to the VLC media player window that is currently running?
i have problem i make code that take data from serial com port for weighting machine it is ok working but it recieve data in more lines.I try to make it receive data in one line In code below i need to take weight fro weight bridge machine automatically by timer in visual studio 2005.it works but receive weight values in more lines. I need to receive weight in one line and automatically updated then convert t to integer
I am making a MFC application with VC++2012 with receiving data from Serial Port and the data is stored in a Listbox, then after processing (convert into numbers) and get these data to draw a sine wave on the chart. (I intend to make a virtual oscilloscope).
Everything works ok at the beginning, but after receiving about 300 items or above (in the Listbox) the value seem stucking (or lagging) and work very slowly.
I receive data by the SerialPort_DataReceived() method, and process of converting and drawing chart also in this method, I think this makes the system overload!!
I would like to handle the response such that if the response is OK, the modem sends another command and if the response is ERROR, the modem resends the first command.
using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; using System.IO; using System.IO.Ports;
[Code] ....
How to pick date / time when serial port starts reading , and also when reading stops ?
I have a class which I wrote and one of its object is "SerialPort" .NET class. In my MainWindow I created instance of my class called "SerialPortComm", then I send through some functions of mine, commands to the Serial Port, and I receive answers through "DataReceived" event.
But when I trying to use Dispatcher.BeginInvoke to write my data I have received (successfully), nothing shows on the RichTextBox which I'm trying to write to.
What can caused that, and How I can make it works?
SerialPortComm.cs
public partial class SerialPortComm : UserControl { public SerialPort mySerialPort = new SerialPort(); public void Open_Port(string comNumber, int baudRate) { mySerialPort.PortName = comNumber; mySerialPort.BaudRate = baudRate;
I have a program that stores values in a map>. I use the map as a dictionary so that I can look through my map if a perticular string already exists. If a string does exist, I want to put the position that I found it at (relative to my text file) in my vector. How do I do this? So far I've tried this:
void mapInsert(string aWordNoSpaces, int index){ // check if word exists in map already, but first we need an iterator object map<string,vector<unsigned int>>::iterator it; it = wordMap.find(aWordNoSpaces); if(it == wordMap.end()){ wordMap.insert(pair<string,vector<unsigned int>>(aWordNoSpaces,index));
[Code]...
Also, why are the zeros showing up here (i've attached a screenshot and circled them): [URL]...
I've used qsort to extract the unique student IDs by jumping every four because there's 80 rows of data and twenty students.
I want to make sure it's all working and there's something very strange going on. If you look at my code, when it comes to initialising the structure with the unique student IDs it will happily print them after each one has been initialised inside the for loop (which suggests to me it's obviously done it) but, however, when I want to print them again outside the for loop in another for loop as a "double-check" it goes horribly wrong, presumably they're not in there at all? If you traverse the code to the bottom you'll see my comments.
Now in my for loop, j is going to be incremented 20 times which will correspond to the #define STUDENTS 20. So imagine the array of structure db[j] , the first loop will set i and j both to zero, retrieve the first unique ID and store it in the structure. Then i is incremented by four to acces the next unique ID and then j is incremented by 1 to insert this new ID in the structure.
I have a pointer to a C string that contains multiple lines of text. I need to change a few characters in the string (possibly adding 1-2 extra). At the moment my code looks like this (char **objectData is the pointer):
Code: char temp[350]; char* end = strstr (*objectData, "word_before_data_changes"); strncpy (temp, *objectData, 39); // Copying the first 39 symbols strncat (temp, "6-11", 4); // inputting some data strncat (temp, end, 100); // copying the last symbols.
I don't know how many there would be. Tried sizeof(end), but this cropped off last two lines for some reason. So using 100 at the moment. This sort of works, but I think it also adds some new lines or null-terminating characters in the end or something like that, because data parser cannot parse the modified data after that.
I have a problem with entering math functions in my Bisection method algorithm program. I just don't know how can I make the function that I enter in my GUI app to go from the GUI to the loop and find the root.As far as I googled I only find codes that you need to pre-enter a function in the double/float.
For example:I have a function f(x) = x^3 - cos(x) - x - 3; and I want to enter that function trough the GUI i made in c++..So this is the main code.
#include<iostream> #include<vector> #include<map> using namespace std; class foo { struct type { int i; string s; }y;
[Code] ....
In the sample code
1) why can't we use union if its members have constructors 2) I am not able to insert in Map. 3) also I am not able to use object of struct type y to assign value of its members and later push_back in vector I am getting following error
knils@knils-HP:scott_mayers$ g++ vector_of_struct.cpp vector_of_struct.cpp: In member function ‘void foo::fun() const’:
For some reason, my input seems to lag one behind when inserting data. Attached, I have code that I wrote along with the example of the lag. What may be wrong with my code that is causing this to lag?
