I have a combobox which doesn't have the CBS_SORT style and after adding some items I'd like to offer the ability for the user to sort it alphabetically by clicking on a given button. How can I sort the combobx after it has been created and some items added to it ?
View 4 RepliesI'm using MFC, and I need to make the combo box drop down list to be draw up - above the contro, instead of below it. How to make this happen?
View 4 Replies View Relatedhow to adjust the combo box height?
I can adjust the combo box width and also the dropdown list height but not the combo box height.
im trying to get the row id created when inserting, ive tried ; SCOPE_IDENTITY(), get_last_identity() adding it to the end of my query string but get nothing back, it doesnt even add row to database. ive also tried adding a stored procedure but it doesnt even have the option in adding that when i right click to add it,(i thinks its because im using microsoft Access MySql)
public static Boolean checkoutOrder(string CustomerEmailId) {
DateTime CreatedDate = DateTime.Now;
DateTime ShippedDateDate = DateTime.Now;
string CustomerId = CustomerEmailId;
OleDbConnection myConnection = GetConnection();
[Code] .....
I'm using Visual C++ 6.0 and I'm trying to use fstream to open and read a file that is created only during runtime. This file is written by another function running on another thread, and my program will keep trying to "open" the file until it can be opened, i.e. after it's created, then read 3 numbers from it and execute the rest of its code.
The file test.txt has the content
Code:
1
3
4
My program that polls and opens the file is as follows:
Code:
ifstream fin;
std::string tfile, snum1, snum2, snum3;
long int num2, num3;
tfile.assign(argv[1]);
printf("Begin prog %s
", tfile.c_str());
[code]....
I executed the program by
Code: test_prog.exe "C: est.txt"
and waited about 3 seconds before putting the test.txt file into C:
My output was
Code:
Begin prog C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
fin is open
snum1 =
num2 = 0 num3 = 0
End of prog
The test.txt file disappears after I refresh the C: folder.
So the values for snum1, num2 and num3 are all wrong, as if the file was not read correctly.
If I put a while fin.good() loop after printf("fin is open "); for that entire block (until printing the values of num2 and num3), then I get
Code:
Begin prog C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
Cannot open file C: est.txt
fin is open
End of prog
How can I correctly read a file that is only created during runtime?
If a window is created by calling Create, the function DestroyWindow must be called to destroyed it at the end?
View 4 Replies View RelatedMy table:
Code:
Database name: test & Table name : Profilemaster
+-----+--------+
| PID | PNAME |
+-----+--------+
| 1 | APPLE1 |
| 2 | APPLE2 |
| 3 | APPLE3 |
| 4 | APPLE4 |
| 5 | APPLE5 |
| 6 | APPLE6 |
| 7 | APPLE7 |
| 8 | APPLE8 |
| 9 | APPLE9 |
| 10| APPLE10 |
+-----+--------+
I like to read the table and get the all PNAME into the combo box.
Using the below code i can read the table, but while loop takes 2 seconds to read 10 records in the Profilemaster table.
How can i reduce the reading time?
My Code is
void MainScreen::OnreadProfileName() {
CDatabase database;
CString SqlString;
CString sDsn;
CString pname;
sDsn.Format("Driver={MySQL ODBC 5.2 ANSI Driver};Server=localhost;Database=test;User=root;Password=client;Option=4;");
[Code] ....
Is any other way to reduce the query execution time?
I am trying to simulate the logical circuits having NAND gates. I am reading the structure from .bench file. The structure of a circuit looks like below:
Code:
INPUT(1)
INPUT(2)
INPUT(3)
INPUT(6)
INPUT(7)
10 = NAND(1, 3)
11 = NAND(3, 6)
16 = NAND(2, 11)
19 = NAND(11, 7)
22 = NAND(10, 16)
23 = NAND(16, 19)
It can be seen that the inputs for Gate 22 are 10 and 16 which are also NAND gates. On the other hand, for gate 10, the inputs are 1 and 3 which are simple inputs. So, i need to sort the gates topologically. Although topological sort will not affect the output for this particular example but i have big circuits also in which topological sort is required. But we can use this simple example to do the topological sort.
My effort:I thought to create a map which will keep the information about the gate name and its indegree. But i am unable to proceed further.
Code:
void Circuit::topologicalSort()//topological sorting (for the mixed circuits) {
int counter = 0;
std::map<string, int> unsortTopoList; //this list keeps a track of gate name and its Indegree
for(int i=0; i<gates.size(); i++) {
[code].....
i cant figure out what im doing wrong with my bubble sort. when i cout the sorted test scores, the first number(testScore[0])this is the code.
#include <iostream>
using namespace std;
int main()
{
[Code]....
I have created a program that first sorts a series of numbers that are input dynamically then an option is given to either use a sequential search or a Binary search. my sequential search works fine but the merge sort coupled with the binary search has a small bug that I just can't seem to figure how to eliminate. I first used my own merge sort but it was really in efficient so a I took a more efficient example and incorporated it in my program but I cant seem to get rid of this bug I'm dealing with. and it seems to be causing a further problem with the Binary seach.
Code:
#include <iostream>
#include <cmath>
using namespace std;
const int N = 10;
[Code] .....
# include <iostream>
# include <vector>
# include <cstdio>
# include <algorithm>
# define inf 100000
using namespace std;
int cnt;
vector<int> merge( vector<int>& left, vector<int>& right) {
[Code] ....
C++ sort algorithm or library that can take input of a bunch of rows of data and then sort rows by an arbitrary defined order of one of the columns ... i.e., sort rows by value of the first column in this order (boba bobc bobe bobx) etc?
View 1 Replies View Relatedi tring to write a employee payroll code with functions and read data from the txt. file and also bubble sort that sorts and displays starting from employees last name and calculations.
//txt file//
Hours Pay rate empID first name last name
40.0 10.00 A1234 Jane Adams
50.0 10.00 L8765 Mary Lincoln
25.5 10.85 W7654 Martha Washington
52.0 15.75 A9876 John Adams
45.0 25.00 W1235 George Washington
40.25 55.00 L9087 Abraham Lincoln
30.0 9.75 T9876 William Tell
42.5 12.50 M7654 Missy Muffett
30.0 10.00 P8765 Peter Piper
and here is my code
Code:
#include <iostream>
#include <cstdio>
#include <fstream>
#include <string>
#include <iomanip>
using namespace std;
const int SZ = 55;
void tellUser();
[Code] .....
here are the errors the are giving
Code:
payroll.cpp: In function "int bubbleSort()":
payroll.cpp:52:8: error: "lastpos" was not declared in this scope
payroll.cpp:52:18: error: "numemp" was not declared in this scope
payroll.cpp:56:10: error: "swapmade" was not declared in this scope
payroll.cpp:57:16: error: "i" was not declared in this scope
[Code] ....
I have to write a function called sortMe that sorts the elements of an array in numerical order from highest to lowest values (descending order) or vice versa (ascending order).
The assignment asks to: NOT re-arrange elements in the array; instead, it uses a second array, an array of indexes for the elements in the original array and then sortMe sorts the second array based on the values in the original array. A sorted version of the original array can then be produced with these sorted indexes.
Header of the function sortMe must be as shown below:
void sortMe(int array[],int sortedIndexes [], int size, char mode)
When mode is 'a', the function sorts the array in the ascending order, and when mode is 'd', the function sorts it in the descending order.
Declare and initialize the array array.
Declare the array sortedIndexes but do not initialize it. You are going to play with the array sortedIndexes in the function sortMe.
EXAMPLE:
int array[5]={3, 5,-1,10,0};
int sortedIndexes[5];
sortMe(array,sortedIndexes, 5, 'a');
After the function call, the elements of the array sortedIndexes should be: 2,4,0,1,3.
notice that the function does not e-arrange the elements in the array.
Code:
#include <iostream>
using namespace std;
void sortMe(int[], int, char);
void main() {
int arr[6] = { 14, -5, 5, 0, 22, -99 };
[code]...
how to use the other array.
You will write a program that uses a multidimensional array having 3 rows and 8 columns and sorts each of the rows using both a bubble sort and a selection sort.
You must declare the array inside of main. You will have a for loop containing the calls to bubbleSort and selectionSort. You need to pass into function bubbleSort and selectionSort the following: 1) each column of the multidimensional array, 2) the size of the column, and 3) a particular row number of the multidimensional array to be used for printing out the "pass" shown on the following pages.
I keep getting an error that the identifier for bubbleSort and selectionSort is not found. (Error C3861)
Also, I feel like I'm missing something in int main() to get it to sort properly.
Code:
# include <iostream>
using namespace std;
int main() {
const int SIZE1 = 3;
const int SIZE2 = 8;
int arr [SIZE1][SIZE2] = { { 105, 102, 107, 103, 106, 100, 104, 101 },
[Code] ....
Example radix sort function to sort an array of 64 bit unsigned integers. To allow for variable bin sizes, the array is scanned one time to create a matrix of 8 histograms of 256 counts each, corresponding to the number of instances of each possible 8 bit value in the 8 bytes of each integer, and the histograms are then converted into indices by summing the histograms counts. Then a radix sort is performed using the matrix of indices, post incrementing each index as it is used.
Code:
typedef unsigned long long UI64;
typedef unsigned long long *PUI64;
PUI64 RadixSort(PUI64 pData, PUI64 pTemp, size_t count) {
size_t mIndex[8][256] = {0};
/* index matrix */
PUI64 pDst, pSrc, pTmp;
size_t i,j,m,n;
UI64 u;
[Code]....
I am trying to fill a combobox using the data from a txt file, with the new line as a split.
Currently it is throwing a System.ArgumentException in mscorlib.dll
try {
string[] lineOfContents = File.ReadAllLines(Properties.Resources.departments_list);
foreach (var line in lineOfContents) {
string[] tokens = line.Split('
[Code]...
My txt list is a resource in my project.
Accounts,
Power,
Commercial,
Procurement,
HumanResources,
Plant,
IT,
Reinstatement,
HealthSafety
why this is throwing the exception?
trying to bind a List of Objects to a ComboBox (just for testing) but I can't seem to get it working :S
This is how my Object is setup:
public class User
{
public string ID { get; set; }
[Code].....
When I try to link combobox with sql column i get error !!
void comfunction() {
string constring = "Data Source=LC-VAIO\SQLEXPRESS;Initial Catalog=sample1;Integrated Security=True";
string query = "select * from tbltest";
SqlConnection cn = new SqlConnection(constring);
SqlCommand cmd = new SqlCommand(query,cn);
SqlDataReader dreader;
[Code] ....
I got error from "string sname = dreader.GetString("name"); "
And this how i try to link it...
I have been learning C# so I've been dragging and dropping. I have a "First Name" and "Last Name" text field. I want to add this to a combo box called something like "User List", which will list the last named then the first names. However I figure I can work with something that can get me to store the names in the combo box.
So. I have two things I need to know:
What do I have to do to have when the button is pressed, add to the combo box?
Is there a way to retain all the entries I have entered? Or no?
I'm trying to find an event for the combobox when its selected value changes , but I can't seem to find the right one since I've tried several events in the dataGridView that are just triggering at the wrong moments. I need to remove the selected item from that combobox so that it doesn't get selected again at the second combobox which usually have the same items .
View 5 Replies View RelatedI'm having issues with selecting the next item in sequence in a combobox dropdown. The dropdown consists of letters A-Z and there is a timer that I have running to change the letter every x minutes. What I need to do is if, for example, letter A is selected, when the timer goes off, it will change to letter B, etc. If it's at letter Z, it needs to go back to the first item, letter A.
letterCode.SelectedIndex = letterCode.SelectedIndex + 1;
if (letterCode.SelectedIndex >= 26)
{
letterCode.SelectedIndex += 0;
}
I have the above, but I keep getting an error:
InvalidArgument=Value of '26' is not valid for 'SelectedIndex'.
how to get this working (letter changing logic block).
I have a comboBox that I created in XAML using using binding and I'm unable to get the selection. I've tried everything I could think of or find on, but no luck.
Here's the relevant XAML and C# code for the comboBox:
<ComboBox Name="projSelected" Selectionchanged="projSelected_Selectionchanged" HorizontalAlignment="Left" Margin="424,27,0,0" VerticalAlignment="Top" Width="199" DisplayMemberPath="proj"/>
projSelected.ItemsSource = DAL.projectList;
Then here is where I try to check the selected value:
private void projSelected_Selectionchanged(object sender, SelectionchangedEventArgs e) {
projectDataList.ItemsSource = null;
projectDataList.Items.Clear();
[Code] ....
And here is my output in the MessageBox that I'm using to test the code:
Quote
project=Website selected=employeeProjects.project
I've been working on making a sprite generator and this is one thing that has kept giving me difficulties. No matter what I've looked up nothing directly says how to nor can I find anything on a similar topic to try and apply to it either. I know how to add the resources and names for the options but how do I get the options to make my picturebox image change in relation to the selection?
View 4 Replies View RelatedSo I'm working on program I had in Windows Form Application.
I have a combobox that lists the years 1981-2013. Beside it, a simple Enter button.
I wanted to be able to assign individual lines of text to each year that would be displayed in the message box.
Like if the user selects 1981, clicks Enter and the message box displayed "In the year of 1981.." but if they select 1982, the message box displayed "In the year of 1982.." I have everything else I want working, except that I can't figure out how to assign different lines of text to different years.
I have a data-bound ComboBox and I populate a DataSet with the values returned from a SQL query.
public DataSet CompanyArray(DataSet dataSet) {
SqlConnection connection = InstancesTest.IDataInterface.DefineConnection();
SqlCommand command = new SqlCommand();
command.CommandText = "usp_CompanyArray";
command.CommandTimeout = 20000;
[code]....
All this works fine. The reason I populated it in an array was so that I could sort the items alphabetically. I know I could just do an "order by" in SQL but I chose this route.
What I'm after is putting a "Please Select" at index 0 in the ComboBox. How can I move this value to the top of the list, without reordering the sorted list?And I don't really want to insert a "Please Select" as a first row in a database table.