so i am just hitting writers block on this one... its lengthy and i am very little into it...
The program takes 4 entered values (total loan, apr, monthly payment, and length of loan).
It is to put out a table that gives the new loan balance each month and the total interest payed at the bottom.
Write a program to calculate the Loan Balance, where a person borrows an amount A and in return he/she agrees to make N payments per year, each of amount P. While the person is repaying the loan, interest will accumulate at an annual percentage rate of R, and this interest will be compounded N times a year (along with each payment). Therefore, the person must continue paying these installments of amount P until the original amount and any accumulated interest is repaid.
NOTE: The formula to calculate the amount that the person needs to repay after T years is-
Balance Amount after T years = A[(1+R/N)^NT]-P
-----------------------------------------------------------
I have a few doubts :
1. I think that the "balance amount" formula can directly give the "loan balance" for the person. I'm not sure if it's correct but in that case the question would serve no purpose. Maybe I'm wrong.
2. If there should be a loop to calculate the loan balance, what condition should I give and which loop will be better to use?
Write a program to create an output file containing a customized loan amortization table. Your program will prompt the user to enter the amount borrowed (the principal), the annual interest rate, and the number of payments (n). The payment must be rounded to the nearest cent. After the payment has been rounded to the nearest cent, the program will write to the output file n lines showing how the debt is paid off.
Code:
#include <stdio.h>
#include <math.h>
int main (void) {
[Code].....
I have a problem requiring me to :
enter loan amount:
Enter interest rate:
Enter length of loan (years)
It wants me to input the minimum amount for the loan, and the minimum interest rate. and then output a table that has 5 loan amounts across the top in $10000 increments and 4 interest rates along the side in .25% increments.
#include <iostream>
#include <iomanip>
#include <cmath>
using namespace std;
int main () {
double loan, interest, length, payment,ti;
//Enter loan price
[Code] .....
Your objective is to write a program that calculates the simple interest for a given loan amount and duration (in years).
Formula:
Simple interest = loan amount X interest rate X number of years
Assume interest rate is a constant 6% per year.
Specifically, your program will:
1. Output descriptive header
2. Prompt and read any customer’s first name, middle initial, and last name individually
3. Prompt and read the principal/loan amount
4. Prompt and read the duration of the loan in years
5. Calculate the interest
6. Output:
a. Customer full name
b. Principal/loan amount
c. Duration of loan
d. Interest rate
e. Interest on loan
f. Principal and interest due at end of term
OK SO THIS IS MY PROGRAM SO FAR. As you can see i got it all but i am so confused with as to for loan amount and duration of year, if i should use float or double to declare it?
i need to finish this assignment by calculating the simple interest and i dont know how or where to begin.
int main(){
system("color f0");
string firstName;
string middleInitial;
string lastName;
cout<<"Please enter your First Name: ";
[Code]...
(I'm using visual c++). Write a program that calculates the balance of a savings account at the end of a three month
period. It should ask the user for the starting balance and the annual interest rate. A loop should then iterate once for every month in the period, performing the following:
A) Ask the user for the total amount deposited into the account during that month. Do not accept negative numbers. This amount should be added to the balance.
B) Ask the user for the total amount withdrawn from the account during that month. Do not accept negative numbers or numbers greater than the balance after the deposits for the month have been added in.
C) Calculate the interest for that month. The monthly interest rate is the annual interest rate divided by 12. Multiply the monthly interest rate by the average of that month’s starting and ending balance to get the interest amount for the
month. This amount should be added to the balance.
After the last iteration, the program should display a final report that includes the following information:
• starting balance at the beginning of the three-month period.
• total deposits made during the three months
• total withdrawals made during the three months
• total interest posted to the account during the three months
• final balance.
What I need is to solve that particular problem using a class. Here is the code solved for the problem not using a class:
#include<iostream>
using namespace std;
int main() {
double annulInterestRate,
balance,
monthlyInterestRate,
[Code] .....
I am running a little business on the side, any program I could use that will show me the balances of clients after withdrawals, deposits. For example, if i had a data file like this :
Code:
e 5 Elden
c 3 Felipe 55342.51415
e 3 Leonardo
e 1 Yong
[Code] ....
Lines beginning with 'e' will have an integer employee ID and an employee name.
Lines beginning with 'c' will have an integer customer ID, customer name, and a floating point account balance.
Lines beginning with a 't' will have a customer ID, employee ID, a 'w' or 'd' representing withdrawal or deposit,
and a floating point transaction amount.
Now, obviously the program doesn't have to be exactly like this but something along these lines.
I am having an issue with my sort function. This is one part of the Hash table program. The main issue is that I am trying to sort the pointer table after all of the values have been entered. The ptr_sort function is not a class function and so I am therefore unable to use the class variables psize and pTable. Is there another way I should be trying this? it is a Vector should I use the sort() function from the vector class in STL?
#include "/home/onyuksel/courses/340/progs/13f/p9/util9.h"
#include "/home/onyuksel/courses/340/progs/13f/p9/hTable.h"
#ifndef H_TABLE1
#define H_TABLE1
void ptr_sort ( );
[Code] ....
I'm trying to build an interactive loan calculator for a school project. These are the requirements:
Your program should do the following:
•Display a Welcome title for the Loan Calculator
•Prompt the user to enter the price of the car
•Prompt the user to enter the length of the term in months
•Prompt the user to enter the APR in percentage (e.g. 4.79%) - without the percent sign of course
Your program should then report with the monthly payment will be.
Use setw() and setfill() to display the content like a receipt. All the data should be neatly displayed.
Example
For a Friend Loan Calculator
Price of Vehicle: $25,000
Term of Loan (in months): 60
APR in percentage (e.g. 4.79% - without the percent sign): 3.8
--------------------------------------------------------------
Total Monthly Payments: $433.50 //NOT ACCURATE
Display all money totals (output values) to two decimal places. You should output an accurate result as well.
For extra credit you may factor in a state auto sales tax of 6.5% of the purchase price of the vehicle and how much of a down payment the user would like to put down. Of course, if you are factor down payment, you must prompt the user to enter that amount.
I attempted to build one but I'm getting a lot of errors using Microsoft visual studio. Here it is below:
Interactive Loan Calculator
#include <iostream>
#include <cmath>
#include <ctime>
#include <cstdlib>
using namespace std;
int num1,
num2,
response,
[Code] .....
I'm trying to create a program to balance a checkbook. In the program, I want to be able to list the deposits and withdrawals individually, as well as the total deposits, total withdrawals, beginning and ending balances. I am trying to set up two different arrays to do this, but how to set them up the right way.
Code:
//checkbook.cpp
//EmilyBattaglia
//final project part C
#include <iostream>
#include <iomanip>
using namespace std;
int main(){
//declare variables
[code].....
program in which i have to write a code in c++ to print a periodic table and when any of its element is clicked, it will show the basic details of that particular element. also, use of graphics is required.
View 2 Replies View RelatedSo if I have an array how do I convert it to a balance binary tree?
View 1 Replies View RelatedI receive this error, been couple hours try to understand, but i havent find the solution.
i get the error here:
case 2:
currentBalance(balance);
main ();
is it because it doesnt have a value, i serious dont know what my problem.
My whole code.
// Lucky ATM.cpp : Defines the entry point for the console application.
//
#include "stdafx.h"
#include <iostream>
[code]....
I have part of it done but im not sure how to get my amount balance to get into my other functions from my file...
#include<iostream>
#include<fstream>
using namespace std;
void welcomeUser();
bool readFile();
void menu();
[Code] ....
and the amount saved that I have in the file is 1200
I don't really have an issue with the math behind this, rather it's more with the code structure itself. Basically, every row is right, except for the last row. The last row (year) needs to be depreciated by the value at the beginning of the last row (year).
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
[Code]......
Need to create a program in c++ to generate a symbol table of given assembly language program?
View 1 Replies View RelatedIf a user enters a string of boolean algebra it will ouput the table.
I have input parsing, cycling through the combinations, and outputing working. However once i parse the input I am not sure what to do with it. I have thought of having it write the parsed input to a new file as a function and then use that function, but that seems bad.
How to dynamically create the function, how to implement it.
BTW This is a console function, if that changes anything.
I had a quick question about how to check the balance of brackets in an HTML file using a stack (pushing and popping). I understand pushing and popping. I get lost when it comes to the logic of having to actually check what is in the brackets, and making sure those are nested correctly.
So while
<title><b> THIS FILE </b> USES CORRECTLY NESTED TAGS </title>
is correct and
<title> <b> THIS FILE </title> IS </b> NOT NESTED CORRECTLY.
is incorrect;
How do I check for the actual tags inside the brackets, keeping in mind that there are single sided tags as well.
(ex. <img src="a.jpg"/>)
I have written an SQL statement that would:
1) Count the number of rows in the table booking that are open and where the booking.postcode is "MK",
2) Take a note of the plot (in booking.plot_id), and then update the table plot.jobs with the value count.
For example running the SQL query when booking table has the following rows:
Would see the following highlighted values in plot.jobs being updated to 1:
I managed to resolve it with this code so far (note I am using Connector/Net):
public void RefreshPlot(){
string query =
"SELECT Count(*) AS count, plot_id FROM booking WHERE postcode='MK' AND status='open' GROUP BY plot_id";
var cmd = new MySqlCommand(query, _connection);
var da = new MySqlDataAdapter(cmd);
var dtCounts = new DataTable();
da.Fill(dtCounts);
[code]....
Currently, my code only checks for existing rows in the booking table and updates the plot table. However if the row gets deleted in the booking, then the changes are not reflected in the plot table.
Example: If we delete the row with plot.id=1 and plot.plot_id=4, then booking.plot_id should go back to being 0, if it was initially 1. At the moment, it doesn't. How would I update my SQL statement to better reflect this? In a sense, it should check for "non-existent" rows, i.e. the impact that the row plot.plot_id=4 & plot.id=1 has on booking.plot_id when deleted?
I'm writing a periodic table program to understand classes. I want to be able to display/sort the elements by several properties such as whether it's a metal, nonmetal, or metalloid. I'm not sure hwo to do it, but my first guess was to create an array of objects; however, I'm having problems using my constructor to set the values.
Class
class Element{
public:
enum class groupNames { HYDROGEN, ALKALI, ALKALINE, GROUP_THREE, GROUP_FOUR, GROUP_FIVE,
GROUP_SIX, GROUP_SEVEN, GROUP_EIGHT, GROUP_NINE, GROUP_TEN,
GROUP_ELEVEN,GROUP_TWELVE, GROUP_THIRTEEN, GROUP_FOURTEEN,
GROUP_FIFTEEN, CHALCOGEN, HALOGEN, NOBLE_GAS,
[code].....
i need the output to display the product of every whole number from 1-3 in a table format.
this is the code i have so far. i know some brackets are missing but i just pasted the meat of the code. when i run the program i keep getting the number 1 displayed in a straight line going on forever
int multiply1 = 1;
int multiply2 = 1;
while(num1<=3)
{ // num1*num2;
//num1 = 0;
while(num2<=3)
{ Console.WriteLine(multiply1*multiply2);
if(num1>=3)
{ Console.Write();
}
}
num1++;
}
I have a C# .NET Application which get data from QuickBooks via the ODBC Driver and save the result to C# data table. So, I want to transfer this data table to a mysql table on my own server. That's the code I use:
using System.IO;
using MySql.Data.MySqlClient;
//Add mysql dll on the .NET Tab in Project's references
string connStr = "DSN=QBTest;";
string myServerAddress = "192.168.0.243";
string myDataBase = "CostTest";
[Code] ....
Write a program that prints a multiplication table using nested loops. In main ask the user for the smallest column number , the largest column number and the size of the increment. Ask the user for the same information for the row values.
In the example the column values entered are: 5, 15 and 2 and the row values 3, 6 and 1.
Given those numbers you would generate the following table.
Multiplication Table
| 5 7 9 11 13 15 ___|___________________________________ | 3 |
15 21 27 33 39 45 4 | 20 28 36 44 52 60 5 | 25 35 45 55 65 75 6 | 30 42 54 66 78 90
Print the 24 values with the grey background. The other numbers show the values to be multiplied.
Code:
#include<stdio.h>
main() {
int a,b,c,d,e,f;
int i,j,total;
printf("Please enter smallest column number: ");
scanf("%i",&a);
printf("
[Code] ....
Challenge:
As an added challenge try to print out the column
headings (5 7 9 11 13 15) and the row headings (3 4 5 6)
Write a program to make a table for any input number and then continuesly ask to press y to print more table and if you press any key other than y then program must be terminate using while loop and do while loop. How to start or end with it.
View 2 Replies View RelatedWrite a program that creates and displays a table of temperature conversions. Get the starting temperature from the keyboard in degrees Celsius (do not allow input of a value below absolute zero). Also get an integer value to represent the number of degrees to increment for each of a 20 row table (do not allow the increment value to be less than one. The first column will be a row number starting with one, follow by the Celsius value and then the conversions into Fahrenheit, Kelvin, and Rankine. Be sure that all columns are neatly right aligned for a variety of inputs.
Thats what i wrote so far:
#include <iostream>
#include <iomanip>
using namespace std;
int main() {
double C,F,K,R,n,a;
cout <<"Enter starting temperature in Celsius: ";
cin >> C;
[Code] ....
Thats what the instructor looking for:
Enter starting temperature in Celsius: -500
ERROR: Temp must be >= -273.15: -273.15
Enter increments in degrees Celsius: 100
# Cels Fahr Kelv Rank
1 -273.15 -459.67 0.00 0.00
2 -173.15 -279.67 100.00 180.00
3 -73.15 -99.67 200.00 360.00
4 26.85 80.33 300.00 540.00
5 126.85 260.33 400.00 720.00
6 226.85 440.33 500.00 900.00
7 326.85 620.33 600.00 1080.00
8 426.85 800.33 700.00 1260.00
9 526.85 980.33 800.00 1440.00
10 626.85 1160.33 900.00 1620.00
11 726.85 1340.33 1000.00 1800.00
12 826.85 1520.33 1100.00 1980.00
13 926.85 1700.33 1200.00 2160.00
14 1026.85 1880.33 1300.00 2340.00
15 1126.85 2060.33 1400.00 2520.00
16 1226.85 2240.33 1500.00 2700.00
17 1326.85 2420.33 1600.00 2880.00
18 1426.85 2600.33 1700.00 3060.00
19 1526.85 2780.33 1800.00 3240.00
20 1626.85 2960.33 1900.00 3420.00
Press any key to continue . . .
My question is to know how to make the sequence from 1 to 20 and whats the best statement for increment...
I'm having a small problem on comparing a table i coded with a string that I want to input. I'm actually building a Bulls and Cows program and this is part of my assignment. What i want to do is to input a string and from the table get the results compared to the string i inputted.
Few words about the Bulls and Cows program.
The game involves two players, a coder and a cracker. The coder (either a person or a computer) chooses the four-digit number with all different digits and keeps it secret. The cracker tries to guess the secret number. After a guess, the coder gives you information about number of digits which were correctly guessed but in the wrong place (they are called 'cows') and how many are both the right digit and in the correct place (they are called 'bulls').
For example, if the coder chooses the secret number 0419 and the cracker guesses 6039, then the coder scores this as 1 cow, since 0 is a digit in the secret number that's in the wrong place, and 1 bull (9 is in the right place.)
what i want to do is when i input a string it scans the whole table of possibilities and gives me the results based on the string. so each row of my table is (let's say the secret code) and based on the given string(the guess) it gives me the result. Here's my table code:
Code:
void initialize(int poss[1296][4])
{
int i=0;
int j, k=0;
int m;
[Code] .....