I want to pass some strings and int values from a file to my program.. if i was using c i could do it like
scanf(p,"%s %s %d %d",&str1,&str2,&num1,&num2);
I don't want to get the whole line just the values one by one if i wanted the whole line i could do it with getline(); now that i want the values one by one how do i do it ...
I created a program in C that opens a text file and read integers.
File `numbers.txt`:
> 5 6 4 6 3 4 1
I use some restrictions with the `fscanf()` library and read the file, just for the record, and if everything goes fine I proceed to the next part of code (I know I could use `fget()`, but this is how I done it).The next part of the code will be this:
- First, I want the program to read the numbers from right to left. I look for an answer in google and many C courses, but I couldn't find a working solution. I think that the code is pretty simple, though I can't find it. **To be clear for the next part, we read the numbers from right to left.**
- Then, this is the hard part for me: I want the program to read the numbers and if the next number is higher (**not equal**) than the last one to keep it in memory, **only if it's higher than the last.** This can be continue for **1 through 500.000 numbers.**
- Then when the procedure done, I want to print how many numbers are greater than the last one and save it to a file, which I can do it if I solve the last problem.
We have the below numbers:
5 6 4 6 3 4 1
The program starts to read the numbers from right to left.Now which and how many numbers are greater than the last one?
The answer is 3 numbers:
5 6 4 [6] 3 [4] [1]
Then the program will print the number 3 with a message and save it to a file called `xxx.txt`. I am posting the `main` code, not all the code just what you need to solve the problem:
Code:
#include <errno.h> // macros for reporting and retrieving error conditions
#include <stdio.h> // load main C library function
#include <stdlib.h> // need that for many reasons ;)
#include <string.h> // loads various of characters functions
}
[code]....
In conclusion, I want 2 pieces of code:
- One to read the numbers from right to left
- One to make the above procedure
The question is "Write a program that uses a while loop to read a set of integers from an input file called "data.txt" and prints the total number of even numbers read from the file."
Code below is the program I have created so far. I keep getting the window to pop up but not stay up so I am assuming I am doing something wrong.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
std::fstream input("data.txt");
if (!input.is_open()) {
std::cout << "There was an error opening data.txt";
[Code]...
I compiled a simple program using a function to add two integers, in order to understand the difference of calling by value vs by reference.
Code:
#include <stdio.h>
int add(int a, int b, int sum);
int main()
{
int a, b, sum;
printf("Please enter two integers
");
scanf("%d%d", &a, &b);
[Code]...
I used these two (one, two) pages I found in the net while studying the subject. So here are my questions...
(a) Do I understand correctly that in the above code all a, b and sum are passed by value?
(b) If I wanted only sum to be passed by reference, how the above code would change?
(c) If I wanted all (a, b, sum) to be passed by reference, how the above code would change?
-Create three files namely all_numbers, odd_number and even_number.
-Get the number of records and the numbers to store from the user.
-Save all the numbers in "all_numbers" file.
-Read each number and check whether it is odd or even.
-Store the odd numbers in odd_number file and even numbers in even_number file.
-Finally, print the numbers stored in odd_number and even_number files.
The output of the program will look like this.
How many records that you want to store :41
2
3
4
The data are written too the respective files.
The even numbers are 2 4
The odd numbers are 1 3
Would it be possible (and how) to use extremely large integers in a C++ program (such as 20 million digits)?
View 7 Replies View RelatedAdd a program that declares two arrays of 5 integers each. Provide one function to load one array with random numbers from 1 to 25, another to fill the other array with user supplied values, and a third function to print an array. The main function should declare the arrays and use the functions to fill each array and print them both.
The code i have so far is
#include <cstdlib>
#include <iostream>
using namespace std;
void printaaray(int printarray1[], int printarray2);
[Code]....
how can I create a program that will accept 2 two integers. the user will also choose among the different operations:
1 for addition
2 for subtraction
3 for multiplication
4 for division
1. Write a c++ program to create a vector of integers. copy the vector contents into list, sort the contents, then copy selected items into another vector(like elements less than 10 etc)
View 1 Replies View Related#include <iostream>
using namespace std;
int main()
{
int num = 2;
int count = 0;
while (num <= 100)
[Code]...
The code works fine but I need the results to print out like
2 4 6 8 10 12 14 16 18 20
22 24 26 28 30 32 34 36 38 40
instead of
2
4
6
8
10
12
I don't know how to do this.
I have done some programming or rather have written and implemented some algorithms in code (is there a difference? :-)) but am having some teething problems with a project I am currently working on.
To start with I am simply reading in the data from a .txt file into a vector. This is the code that I currently have:
Code:
#include <iostream>
#include <fstream>
#include <cerrno>
#include <vector>
[Code]....
This compiles fine but currently outputs a different integer everytime I run the program. I can remember having this problem when I started coding before using a different language and if I remember correctly it was quite easy to resolve. I thought it was because I had missed off the 'return 0' but it is something similar I think.
I know it would be easier to create an int array, but I want the program to create integers as the user requests. For example, if the user enters 4, the program creates 4 integers with the names input. Each integer is better as an individual integer, not an element in an array.I'm not sure if this is a possibility with C++.
View 3 Replies View RelatedThis is the problem :- Write a program that keeps reading integers until user enters -1, then it prints the maximum and the minimum among all numbers (-1 should be ignored).
View 14 Replies View RelatedI'm trying to get my C program to compile but it's not working at all. I've programmed a little in C++ before but I'm not used to C. Here's my program so far:
Code:
int main(void){
// Establishes variables
int num1, num2, product;
float quotient;
[Code] .....
It keeps giving me an error message as follows:
"/usr/bin/ldrelabwk2: file format not recognized; treating as linker script
/usr/bin/ldrelabwk2:1: syntax error
collect2: ld returned 1 exit status"
Write a program that asks the user to type 10 integers of an array. The program will then display either "the array is growing", "the array is decreasing", "the array is constant", or "the array is growing and decreasing."
(Hint: compare consecutive numbers in array and check whether it is increasing or not or constant) I wrote the program very well, but do I have to use "bool" like in c++ ? I haven't known how to code in c++ yet.So, I don't want to use "bool" in C.
I also wrote code about it but it looks like backslash and one,two,three,four,five how can I do it like this ?
Write a C program that takes multiple integers from the user and finds the minimum value. The numbers entered by the user are positive integers. When the user is done entering all the numbers, the user enters the sentinel value of -1.
This is a sample output. Notice how the program prints a counter (1, 2, 3, ) for user keep track of how many numbers were entered so far. Include this feature in your program.
I have tried different ways to get the result from while loops, do while, and if-else statements. We have not done any max/min problem in class and the book was kind of vague. We have not learned arrays yet in class and I can't figure a way to compare the integers the user inputs as it is an infinite(from what I am reading) amount aloud. The problem I am seeing is the loop works and stops with the sentinel value but the INT_MIN is using the sentinel value. I also have not addressed the input of negative numbers yet with the first program I wrote, maybe one of my problems.
Code:
/*File:HW2Q3.c,
A C program that takes multiple integers from the user and finds the minimum value. The numbers entered by the user are positive integers. When the user is done entering all the numbers, the user enters the sentinel value of -1.*/
/*header files*/
#include<stdio.h>
#include<limits.h>
/*****start program*****/
int main() {
[Code] ....
I have also tried this way as well, min value still comes back as -1 the sentinel value, and the else statement is being ignored. I am sure it is something silly but I am lost and confused at this point.
Code:
/*File:HW2Q3.c,
A C program that takes multiple integers from the user and finds the minimum value. The numbers entered by the user are positive integers. When the user is done entering all the numbers, the user enters the sentinel value of -1.*/
/*header files*/
#include<stdio.h>
#include<limits.h>
[Code] ....
The problem deals with writing a program to geta series of integers from a user and storing those values into an array. Then use a function called selection_sort, when given an array with n elements, the function must sort the array from smallest to largest values.
I have code, and im trying to get it to compile but im getting these implicit declaration errors and conflicting types. Here is my code and the compiler errors.
Code:
Compilation started at Sun Feb 10 20:14:48
gcc -Wall -o ex9-1 ex9-1.c
ex9-1.c: In function 'main':
ex9-1.c:16:5: warning: implicit declaration of function 'selection_sort' [-Wimplicit-function-declaration]
ex9-1.c:20:2: warning: implicit declaration of function 'prinf' [-Wimplicit-function-declaration]
ex9-1.c: At top level:
[Code] ...
Compilation exited abnormally with code 1 at Sun Feb 10 20:14:49
Code:
#include <stdio.h>
int main(void) {
int a[100], i, j, N;
printf("How many numbers will you be entering: ");
scanf("%d", &N);
[Code] .....
I want to write a program to read in 15 integers from the user, and then store them in a 5x3 array, and print out the numbers as a 3x5 array.
View 7 Replies View RelatedCreate a program that adds, subtracts, multiplies, or divides two integers. The program will need to get a letter (A for addition, S for subtractions, M for multiplication, or D for division) and two integers from the user. If the user enters an invalid letter, the program should display an appropriate error message before the program ends. If the letter is A (or a), the program should calculate and display the sum of both integers. If the letter is S (or s), the program should display the difference between both integers. When calculating the difference, always subtract the smaller number from the larger one. If the letter is M (or m), the program should display the product of both integers. If the letter is D (or d), the program should divide both integers, always dividing the larger number by the smaller one."
And here is the test data. I am posting the results from my desk-check table.
operation first integer second integer answer
A 10 20 30
a 45 15 60
S 65 50 15
s 7 13 6
G -1
M 10 20 200
d 45 15 3
d 50 100 2
Then, I transferred my program into a source file. Here it is:
//Exercise16.cpp - display answer of two integers
#include <iostream>
using namespace std;
int main() {
//declare variables
int firstInteger = 0;
[Code] ....
After putting in the data, everything worked fine, except the last two operations, which are M (multiplication) and D (division). All the answers for the last two operations essentially give me a 0.
You are to create a program that will read 50 integers from a file and sum them together. Output this sum to an output file. You will also output (to the file) how many numbers were odd, and how many were even (zeros may be considered even). Your program MUST employ a while loop to read the values from the file.
The while loop should check for TWO things (what are they?). Hint: you know you need to read 50 numbers, but for correct file processing, what else should you check for? Your grade will be based on whether or not you correctly identify both conditions to be used in the while loop.
Code:
#include <iostream> // Preprocessor directive for cin and cout
#include <fstream>
using namespace std;
int main () {
// Declaring variables
ifstream num_list;
int number(0), even(0), odd(0), count(0);
[Code] .....
I am getting error: no match for 'operator+=' in 'sum += num_list' .....
write a program in c to read a sequence of N integers and print the number that appears the maximum number of times in the sequence.
View 1 Replies View RelatedWhile I execute the fileprint function i was able to retrieve the record from the txt file. but at the end of the console im getting randoms number i have tried to understand what causing the problem. I have attached a screenshot....
Code:
void fileprint(){ Code: int c;
struct student{
long id;
char name[20];
int mid1;
[Code] .....
I have a predicament trying to read integers and placing them into an array and finding the max and min. Theres 500 of them and all separated by line:
200
300
400
My current code is this and Im pretty sure Im way off, plus the program crashing on debug isnt working.
void analysis::i_find() {
ifstream input;
input.open("input.txt");
[Code].....
The array is also supposed to keep track of how many times a certain number is supposed to appear and Im totally lost on how to do that.
I'm a beginner at c++ and I need to write a program that reads a set of integers and then finds and prints the sum of the even and odd integers. The program cannot tell the user how many integers to enter. I need to have separate totals for the even and odd numbers. what would I need to use so that I can read whatever number of values the user inputs and get the sum of even and odd?
View 2 Replies View Relatedi have prepared a code the read from txt file with values such integers and strings. but the code i have prepared reads only 1 line. how can i make the code to read multiple records from txt file.
input records example in txt file:
9009 James 90
Code:
#include<stdio.h>
#include<conio.h>
#include<stdlib.h>
void main()
{
int c;
struct student{
}
[code]....
I have the following code. Everything compiles but when it runs the sums are not correct. I need to calculate the sums for all the odd integers, the even integers, and all the integers.
my infile was provided with the following integers. I am not supposed to assume the infile has 20 integers.
Also, I wanted to the average to calculate with two decimal place precision and that is also incorrect??? setprecision(2) I thought would work???
#include <cstdlib>
#include <iostream>
#include <fstream>
[Code]......