Write a program which stores 10 decimal numbers in an array. For these numbers accept input from the users. Once the array is populated do the followings:
Display each elements of the array
Display the sum of all the elements of array
Write a program which stores 10 decimal numbers in an array. For these numbers accept input from the users. Once the array is populated do the following:
Display each elements of the array
Display the sum of all the elements of array
I am trying to write a program that adds numbers to an array. The array capacity starts out at 2, then doubles whenever the size reaches capacity. The program works perfectly fine when the array needs to be expanded. So I have narrowed down the issues into this one function (_dynArrSetCapacity)
Creates original array
DynArr* createDynArr(int cap) {
assert(cap > 0);
DynArr *r = (DynArr *)malloc(sizeof( DynArr));
assert(r != 0);
initDynArr(r,cap);
[Code]...
If i do createDynArr(10) for instance in the main, the program works perfectly, as it never gets expanded
user enter four number and the output will be the greatestt number among these
View 1 Replies View RelatedI need to write a program that merges the numbers in two files and writes the results to a third file. The program reads input from two different files and writes the output to a third file. Each input file contains a list of integers in ascending order. After the program is executed, the output file contains the numbers from the two input files in one longer list, also in ascending order. Your program should define a function with three arguments: one for each of the two input file streams and one for the output file stream. The input files should be named numbers1.txt and numbers2.txt, and the output file should be named output.txt.
View 1 Replies View RelatedI have to write a program where the user will input integer numbers. How many numbers they enter is unknown, therefor you should use a repetition structure for the input. When the user is done, they will enter -1 to exit.
Create a dynamic array if the size=2( the initial size must be 2) Repeat until user enters -1.
I have to do this without using vectors.
This is what i have, I cannot figure out what to put in main. I was thinking of a do-while?
Code:
#include <iostream>
using namespace std;
void resize(int *[], int);
int main() {
int *listDyn;
int size=2;
[code].....
I need to write a program that reads four float numbers from the input.txt file, then it prints out the greatest of the four numbers into the output.txt file. I did everything, but the numbers don't print out.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
ifstream inFile;
ofstream outFile;
float number1, number2, number3, number4;
[Code]...
User enters sentence "The Smiths have two daughters, three sons, two cats and one dog." (The numbers may change depending on what the user chooses to enter. He told us the range would be from zero to nine.) and we have to convert the written numbers within the sentence into actual decimal numbers and print out the new sentence. Ex. The Smiths have 2 daughters, 3 sons...etc.
I have written the following bit of code which reads the string and finds all the "written numbers" but I am not sure how to proceed from there. I am stuck on how to print out the new sentence with the converted numbers as my professor mentioned something about creating the new string using dynamic memory allocation.
Code:
#include <stdio.h>#include <string.h>
int main () {
char A[100];
int length = 0;
int i;
[Code] .....
How to make an array which stores the values i'm getting from the users?
For example if i have a function which allows the user to give me values, how can i store them in an array.
I'm writing a function that stores a number into an array. If the number is greater that the lowest number in the array then it replaces it. The array size is 10. When the number is stored in the array. The lowest number must then be remove.
View 3 Replies View Relatedim trying to write a source code that find the smallest, largest and average of numbers in array. the code runs fine, but it is not giving the highest number and the the average should include only four number excluding highest and smallest number from the array.
void OlympicJudging() // Olympic Judging {
int numbers [6];
double average, sum = 0;
int temp;
for(int i = 0; i < 6; i++){
cout << "Please type a value for scores: ";
cin >> numbers[i];
[Code]...
write a program that ask his or her name and store it in a character array
View 1 Replies View RelatedMy program needs to be adjusted to send out the numbers as 2 decimal , but nothing work.
#include <iostream>
#include <iomanip>
using namespace std;
int main() {
int
number_ofstyle_American,
number_ofstyle_Modern,
[Code] .....
The code should convert binary numbers to decimal but it doesn't..
Code:
#include <stdio.h>
#include <math.h>
#include <string.h>
int main()
{
[Code] ....
Extracting integers from a string is trivial, but I am unable to find a function or code that will extract decimal numbers from a string.
I have a string that looks something like this:
" Asdf 1 1.3825 4.0000 12.0000 1.9133 0.1853 0.9000 1.1359 4.0000 "
Any tips on extracting the numbers (in decimal form) and storing them in a vector?
This is the question: [URL] .....
Now I have the binary numbers printed out in my code, but I don't know how I can covert them into to decimal.
#include <iostream>
#include <iomanip>
#include <string>
#include <cmath>
using namespace std;
int main() {
int numberOfDigits;
int numberOfRows;
char flag;
[Code] ....
So I am trying to write a program that converts roman numerals into decimal numbers. I so far have come up with:
Code:
#include <stdio.h>
#include <ctype.h> // importing the tolowerfunction
//variables
int decimal, total;
char numeral[];
[Code] .....
But each time I compile it, it times out as if it were hitting an infinite loop. I have a feeling that I am not passing an individual character to the roman_to_decimal function but am unsure why.
I need to display 0-15 hex numbers[0X00-0x0F] in decimal value...& I'm getting the output but it's not exactly what it should be,below is my code.. [This not the complete code,but main part where the changes are done]
Actual output i should get is for 1v it should generate 0001,for 2v it should generate 0010 and simultaneously till [15v-1111]... But what i'm getting is exactly different to this for eg for 7v,8v&9v the bits generated are 1101,1011,1011 respectively...
[URL] ....
Code:
sbit V1 = P2^0;
sbit V2 = P2^2;
sbit V3 = P2^4;
sbit V4 = P2^6;
#define DAC_table V1,V2,V3,V4
#include <stdio.h>
#include <string.h>
idata unsigned int ptr2tbl ;
[Code] .....
Create a program that will ask the user to enter a decimal value (1-999999) then display its corresponding binary numbers. Repeat this process until the value entered is equal to 0. Use the following Function Prototype:
void BinCodes(int value);
Sample Input/Output:
Enter a Decimal: 35
Binary: 100011
Enter a Decimal: 184
Binary: 10111000
Enter a Decimal: 0
I am trying to make a program that will convert a list of binary numbers from a file into decimal and print the decimal to the screen. I have no problem doing the conversion, the problem comes up when our teacher wants the input file in a format as such:
3
10110101
11111111
10101010
The first number is supposed to tell the program how many different 8bit strings it is going to have to convert, and then the following lines are those binary numbers.
I am not very experienced with file inputs, and I know how to open files and read lines in.. The problem is, how to say "ok the first line says 3, so now I have to convert the next 3 lines" . I am assuming it is just a simple loop that I am missing....
This is in c. Write a program which asks for X numbers, and stores them in an array.
The program then asks the user to enter a number to look for, and tells the user how many times that number appears in the array of numbers (if any), and the array index which contain the number
Make an array of the indexes where the number was found, and then format your output to match my output.
Sample Run:
How many numbers would you like to enter: 5
Please enter a number:1
Please enter a number:2
Please enter a number:3
Please enter a number:4
Please enter a number:2
The numbers you enter were: 1, 2, 3, 4, 2
Please enter a number to find: 2
The number appears 2 times, at array ellements with indexes 1, 4
Press any key to continue . . .
Write a C program that sorts an unsorted array of 5 integer numbers in ascending order by swapping numbers repeatedly. Specifically, first prompt the user to input 5 numbers and store the numbers in an array. Then, if the numbers in the array are not in ascending order, ask the user to provide the indices of two numbers in the array that the user wants to swap. If the user does not enter valid indices (i.e., outside 0 to4), then re-prompt the user to enter new indices. Continue prompting the user to provide indices of numbers to swap until the array becomes sorted in ascending order. Finally, when the array becomes sorted, the program should print "The array is now sorted in ascending order".
Implementation Requirements
Use the #define directive to define the size of the array.
Implement a function called "checkArrayOrder" to check whether an array is in ascending order or not. The prototype of the function is
"intcheckArrayOrder(int arr[], int size);". The function should return
1 if the array passed to the function is in ascending order0 if the array passed to the function is not in ascending order
Define the function prototype in your program.
Implement a function called "swap", whose prototype is "int swap(int arr[], int size, int i, int j);" which swaps the numbers in positions "i" and "j" of the array passed to the function and returns
1 if the indices"i" and "j" are within bounds (i.e., between 0 and 4) and the swap operation is performed correctly.
0 if the indices"i" and "j" are outside bounds so that the swap operation cannot be performed.
Define the function prototype in your program.
Use the function "checkArrayOrder" whenever your program needs to check whether an array is in ascending order or not; and the function "swap" to swap the numbers the user specifies (Note that, you should check whether the user provided indices are valid inside the function "swap" and not inside "main").
here is my code so far
Code:
#define ARRAY_SIZE 5
void main()
{
int i, array[ARRAY_SIZE];
printf("Enter %d numbers
", ARRAY_SIZE);
for(i=0; i<ARRAY_SIZE; ++i)
scanf("%d", &array[i]);
[Code] .....
I'm just not sure how to proceed. I'm not really sure how to progress the checkArrayOrder function to the swap function (in the if statement).
i have a programming problem and i am unsure of what the final part is.the question is:
Write a program that fills an array with 10 random numbers between 1 and 20, displays the 10 numbers, and finds the sum of the 10 numbers. Call the getData, displayData, and getSum functions from the main function. Output the sum from the main program by calling the getSum function within a printf statement.
i am just really unsure of what this is--getData, displayData, and getSum functions from the main function. Output the sum from the main program by calling the getSum function within a printf statement.what i have got so far is;
Code:
#include <stdio.h>
#include <stdlib.h>
#define ARY_SIZE 10
int main() {
int randomNumbers[ARY_SIZE], sum = 0, i;
[Code]....
I have to make a program that takes several numbers into an array into a function, and send them back into the main function multiplied by 1.13. This is what I have so far:
#include <iostream>
using namespace std;
void connell(int&n[20])
main() {
int num[20];
[Code] ...
I do not know how to get numbers from an array from a main program to a function.
So I tried debugging this program almost 10 times, each time finding a problem then making code to fix it, I used to get wrong values but then now after I changed the calculation from an infinity while loop to a for loop (because after some changes I realized that now I know the number of entries, meaning the start and the end of the loop) the program now displays no values at all. I checked it thoroughly and until the calculation process its functioning exactly the way it should but then the calculation breaks hell loose . Also the for loop that raises 2 to the power needed works fine too so it must be something with the other processes included in the calculation....
This used to be a function of a multiple value types conversion program, I isolated it for easier analysis as a lone standing program.
Code:
#include<iostream>
using namespace std;
int main() {
int d[10],e[10],anse=1,r,limit;
short int counterd=0,i,j;
float bind=0;
[Code] ....
I had the idea to write a program that would convert a decimal integer into any base up to 36 (there are no letters after that) so I decided to give it a try.
Code:
#include <stdio.h>
#include <stdlib.h>
char letters(int r); // prototypes function for converting 10's to A's and so on, base 11+ will work
int main() {
int base;
int d; //declares decimal integer
int d_clone; // clones d for a loop
[Code] ......