I'm trying to write a program that prints all of the prime numbers to the screen. I'm getting angry because it only prints EVERY number. I think it has something to do with the bool change not being able to leave the for-loop but how to fix it.
Code:
#import <stdio.h>
#include <stdbool.h>
int main(void){
printf("
The Primes Are: 1");
[Code] ....
how to make a programm in native c++ which print out all prime numbers less than or equal to given number????????
View 5 Replies View RelatedI have a program that gets prime numbers that doesn't work. It looks like it works for all prime numbers except odd non-prime ones. Here is the code:
Code:
#include <iostream>
using namespace std;
bool isPrime(int prime) {
while(true) {
int track = 0;
[Code] ...
Write a c++ program to print out the first n prime numbers and the sum of the first n prime numbers.
View 7 Replies View RelatedI am trying to print the prime numbers, so i put the numbers into the vector and then erase the non prime numbers. if i comment the break statement i get runtime error saying out of bound, but if i don't comment it out it prints the primes but it also prints the multiples of 3.
void Eratos( int length, vector< int > &v ) {
int i;
for (i=0; i<length; ++i) {
v.push_back(i);
cout <<v[i];
[Code] ....
/* Task: create a function that determines prime number and use it to print out prime numbers from 0-50: */
Function prototype: Should return a `bool` (because it answers a yes/no question) and should take in a single int (to ask whether it's prime).
- An int greater than 2 is prime if it is not divisible by any number between 2 and itself, not including itself.
- Use this function to print out the primes less than 50. Check it against my list:
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47
#include <iostream>
using namespace std;
int prime(int&x) {
if(x%2==1)
[Code] ....
It is printing out the correct prime numbers but also printing this between each number: 1629974960
I am trying to make a program that will convert a list of binary numbers from a file into decimal and print the decimal to the screen. I have no problem doing the conversion, the problem comes up when our teacher wants the input file in a format as such:
3
10110101
11111111
10101010
The first number is supposed to tell the program how many different 8bit strings it is going to have to convert, and then the following lines are those binary numbers.
I am not very experienced with file inputs, and I know how to open files and read lines in.. The problem is, how to say "ok the first line says 3, so now I have to convert the next 3 lines" . I am assuming it is just a simple loop that I am missing....
I wrote a program which sends a starting and ending range to other processes and the processes calculate the prime numbers in that range and return the count of prime numbers to the head process, process 0. But this is not working properly at the moment. I realize I still have to split up the range based on how many processes I have...I still have not figured out how I want to set that up. I
Code:
#include <stdio.h>
#include <stdlib.h>
#include <mpi.h>
int isPrime(int num);
int main(int argc, char **argv){
}
[code]....
Why this program won't correctly print the proper totals on screen? See my code and the included screenshot.
Code:
#include <stdio.h>
int main(void) {
int total, first, second;
printf("Enter 2 numbers:
[Code] .....
Basically this is what i need to do. Write a program that reads a number from the keyboard, separates it into its individual digits and prints the digits to screen, each on its own line followed by the same number of stars as itself.
For example, if the number is 2339 the program should print
9 *********
3 ***
3 ***
2 **
So far i have managed to separate the number and have them on different lines, but how to implement the stars onto each line with the number!
My code so far:
int main() {
int n;
printf("number? ");
scanf("%d", &n);
while (n > 0) {
printf("
%d
[Code]...
This is a program that display prime numbers from 1 to 100. it has problem linking when i run the program.
#include <iostream>
class Prime {
public:
int PrimeNo();
int Display();
};
// class Prime number
int Prime::PrimeNo()
[Code] ....
Here is what I have:
#include <iostream>
#include <cmath>
using std::cout;
using std::endl;
using std::cin;
[Code] .....
This is the output after compiling when I enter 10 as 'x':
3
5
5
5
7
7
7
7
7
9
I have been writing a program to generate pairs of RSA keys using small prime numbers. I have been using mpz_invert() to get a value for d for the private key. On small prime numbers it calculates the correct value, but on larger primes it calculates incorrect values.
I'm assuming there must be an upper limit to the values the mpz_invert() function can handle? If so, what is this limit to avoid erroneous values?
I'm a new coder for C++, and I've recently learned java before starting this programming language. I'm attempting to find all prime numbers up to the number a user enters (i.e. User enters 10, System shows "1,2,3,5,7"),
#include <iostream>
#include <cstdlib>
using namespace std;
int main(int argc, char** argv) {
int num;
cout << "Enter a positive number." << endl;
[Code] ....
I've been looking at my forloop, and I can't seem to pinpoint the problem with it.
I need to write a program that will allow the user to enter a number "n" and the program tell you that the nth prime number is .....
EXAMPLE
user enters 55
printf("The 55th prime number is %i", variable");
I want to make a program to print the product of even numbers between 1 and 30 and sum of odd numbers between 1 and 30. But the answer of product is negative. The photo shows the output of the code.
#include <stdio.h>
#include <conio.h>
void main ()
{
int i, even_product=1, odd_sum=0;
for(i=1;i<=30;i++) // For loop starts here!
[Code]...
I am writing a program that prints the sum of even and odd numbers and here is my code
#include <iostream>
using namespace std;
const int SENTINEL = -999;
int main() {
int integers = 0;
int even = 0;
int odd = 0;
[Code] ....
Nut now in the output it adds -999 to the odd numbers ....
The program must print out 5 random numbers, from 1 to 45 and 100 different sequence.. Now I want each number of sequence to be different and not the same....
for example
1,2,3,4,5
6,7,8,9,10
....
...
..
here is my code:
#include <iostream>
#include <ctime>
#include <cstdlib>
using namespace std;
int main () {
int xRan1;
[Code] ....
The problem is with the first "Type and Run," where the code looks like this:
Code:
/* print_it.c--This program prints a listing with line numbers! */
#include <stdlib.h>
#include <stdio.h>
void do_heading(char *filename);
int line = 0, page = 0;
[Code] ....
I am using the gcc compiler in Ubuntu 12.04 LTS and I get the following error:
Code:
print_it.c: In function "main":
print_it.c:36:15: error: "stdprn" undeclared (first use in this function)
print_it.c:36:15: note: each undeclared identifier is reported only once for each function it appears in
print_it.c: In function "do_heading":
print_it.c:49:16: error: "stdprn" undeclared (first use in this function)
I was told that "stdprn" can be recognised by a DOS based compiler and the book says I can try using "stdout" instead. It looks like this now:
Code:
/* print_it.c--This program prints a listing with line numbers! */
#include <stdlib.h>
#include <stdio.h>
void do_heading(char *filename);
int line = 0, page = 0;
[Code] .....
It compiled OK with the gcc compiler but I only get this when I run the program:
Code:
Proper Usage is:
print_it filename.ext
I am not sure whether I should continue looking into this but even when I tried compiling and running it on Windows, the .exe file won't even launch. The other ones do but this first one doesn't.
Questions:
1. What should be done to make this program run?
2. Even though the book says "don't care" if the reader does not understand the items (It's Day 1/Lesson 1), I would still like it to run as I don't want to experience compiling and running problems in the future. Should I even bother doing this section of the book or is it obsolete and should be skipped?
I tried to work on this program for while, but I am not able to get it to work
Directions:Write a program that reads an integer n from the user.
Display the first 100 numbers, with newlines every n numbers, using % operator
#include <stdio.h>
int main(void){
int a = 0;
int b = 99;
printf("Enter a number: ");
scanf ("%d", &a);
[Code] ....
When I run this code it asks me to enter a number. It doesn't matter what number I enter it gives me the numbers from 1 to 100 in one horizontal line.
I want this program to do something like this:
for example if the user enters n=6 the program should give:
0 1 2 3 4 5 6
7 8 9 10 11 12 13
and so on
Find all the prime numbers between a given pair of numbers. Numbers should be read in from an input file called "numbers.txt" and find all the prime numbers between them. Store the prime numbers in an array, then sort the array from greatest to least. Display the array before and after the sort.
I'm stuck on how to put the prime numbers into an array.
The input file has the numbers 1 & 100.
Here's what I have so far.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
ifstream fin;
fin.open("numbers.txt");
[Code] .....
I want to write a program to read in 15 integers from the user, and then store them in a 5x3 array, and print out the numbers as a 3x5 array.
View 7 Replies View RelatedSo i am struggling for days to get this done and all i need is to get the sum of the areas and get them printed on the screen my code is this:
Code:
#include<stdio.h>
#include <stdlib.h>
#include<conio.h> //Not needed in Dev C++//
#define PI 3.1415
float Area_of_Rectangular(float length,float width);
float Area_of_Circle(float radius);
int main()
[Code]...
Print the inverse number. Ex: 2178*4=8712
Write down a program which can satisfy the prerequisite and print out the screen.
The answer is:
Code:
void inverse2 ()
{
int i,j;
for (i=1000;i<=9999;i++)
for (j=1;j<=9;j++)
if (i*j==inverse (i))
printf("%5d%2d",i,j);
}
I can't understand the double for loop.
for (i=1000;i<=9999;i++)
for (j=1;j<=9;j++)
And The meaning for
i*j==inverse (i)
This code runs. However, when I run it, the text from printf doesn't appear until after I type in the two numbers.
I use Wascana, will it run correctly on other compilers?
Code:
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
int main() {
fflush(stdout);
[Code].....
And this is how it turns out on the screen:
Code:
6
3
What size is the die:
how many dice to roll:
Numbers are 3d6
Rolling die no.1...
RolledDie: 4 DieTotal: 4
Rolling die no.2...
RolledDie: 5 DieTotal: 9
Rolling die no.3...
RolledDie: 5 DieTotal: 14
The total is: 14
How to print to the screen the value of n after it has been multiplied.
For example: if I use cout << "n: " << n << " power: " << power << "
"; I
can see the variable "power" decrementing by 1, but I don't see the variable "n" incrementing with its new value after it has been multiplied by n * n.
#include <iostream>
using namespace std;
typedef unsigned short int USHORT;
typedef unsigned long int ULONG;
ULONG Getpower(USHORT n, USHORT power);
[Code] .....
