The file is open, the program has exclusive access to the file, no data is written at all. Even the TestLine fails to write.
Save.open("SaveFile.mystery");
if (!Save.is_open()) {
cout<< "Not open.";
getch();
[Code] .....
i cant display the data written to this file in a switch statement (case 2) what am i doing wrong..the file data is being written into the text file but i cant display it
insert
Code:
#include <stdio.h>
#include <conio.h>
#include <stdlib.h>
FILE *fp; //creates a file pointer
typedef struct date_info
[Code].....
I've found that with streamwriter(sw) the data isn't displayed with the written to document until you either leave scope or use sw.close I'd prefer to keep sw open as I will be writing to the file in and out, sometimes very frequently, but would also prefer the data to be viewed in real time. Is there an efficient way of going about this?
View 12 Replies View RelatedI am trying to write a client/server application that takes input to an array of structures from the user,stores the data in a shared memory segment and then writes the same to a file when I close the application. How do I get started? And how do I ensure that the server stores the data correctly? Also, the server needs to be a concurrent server that accepts connections from multiple clients.
View 1 Replies View RelatedHere is a working C++ program and its output that reads the names of a certain number of functions whose names are written in a disk file that provides the control parameters in a near-real time fashion. Based on this information, the program calls those functions whose names were given in this text file as parameters. The method I have used is to build a map of functions that connects the names of the functions to the actual functions. Once this map is created, then it is very easy to iterate in such a way that only those selected functions are called.
So far this is working well, and it makes the logic of the code easier because ultimately there will be a large inventory of functions (probably hundreds of functions), and this way of pre-building a map of functions avoids writing hundreds of if statements in the code. Of course, pre-building this reusable map in the background is still equivalent to writing that many if statements, but at least it makes the code very compact and much more automatic, since it is done only once.
But I now have a related question: In this case (when the selected subset of functions to call is given as incoming data as in this example), does C++ make it possible to avoid using maps of functions, by directly applying the string variable that holds the name of the function in order to call the original function immediately For instance, if a string variable s = "MyFunction", then is there a more direct way of using this string as if it were the actual function whose name is spelled exactly in that way? This would make the code even more compact.
Here is the sample test code for the map of functions, and its output:
First of all here is the text file "FileForNamesOfFunctions.TXT" that contains the part of the "data", which is the set of functions select from from the inventory and only call these:
Code:
function2
function3
function5 And here is the C++ code that uses this "data":
Code:
#include <fstream>
#include <iostream>
#include <sstream>
#include <string>
#include <vector>
[Code] ....
I'm writing a program that writes to a report in a text file. It uses a struct but with no array. How can I write this so that the report comes out as it should because as of now after i removed the brackets from record which is the variable of the struct my report isn't printing right.
View 8 Replies View RelatedI am trying to write my files to another subfolder . Below is my program.
Code:
cat th6.c
#include <pthread.h>
#include <stdio.h>
#include <string.h>
#define SIZE 8
#define NUMELM 8
[Code] ....
I observe my filename along with directory as text in the new file created in sublfolder. This is output.
[cporgs/apue/threads]: mkdir first
[cporgs/apue/threads]: ./a.out test.txt first
test.txt -- first/test.txt
dfdfdfdfdfdfdf-14
dfdfdfdfdfdfdf-14
in thread test.txt first
[cporgs/apue/threads]: cat first/test.txt
dfdfdfdfdfdfdffirst/test.txt
[cporgs/apue/threads]: cat test.txt
dfdfdfdfdfdfdf
I could not able to get from where this filename and folder is getting added.
My Application is C# winform
I am facing below error at the time of form close and end of Dispose() method .
The instruction at "0xXXXXXXXX" referenced memory at "0xXXXXXXXX", The memory could not be "written". Click on OK to terminate that program.
how to avoid / catch this error .
i want to know how to copy data from already written text on console?
i am actually making a program that reads texts already printed over console so i want to capture that data again but i must not have a copy version of every thing behind the scenes i.e. in the background. I need to know how to capture data or amount of some data from console output? for example:
[console started]
It's imaginative console for the purpose of understanding.
I will make a very impressive program which will wow! you and to my instructor.
|
[/console ended]
Now i have no copy of any data printed on console/command prompt or whatever you say it. My question is how can i copy following strings from console?
1) It's imaginative console for the purpose of understanding.
2) It's imaginative console for the purpose of understanding.
I will make a very impressive program which will wow! you and to my instructor.
3) very impressive program
4) understanding.
I will make
NOTE: Small bold '|' is my most recent cursor position on cmd.
Moreover in case you need about my IDE,
i am using :
Windows 7 Ultimate Service Pack 1.
Microsoft Visual Studio 2013 Ultimate.
Architecture 64bit.
I'm taking an operating systems class and I'm trying to write a script that would execute a program in Simple OS.I"m not sure if this is the right place for this because although the entire OS is written in C, "asm" are assembly language code. Anyway when I run the OS in virutal box and try to run a program, I get a "Fatal Execption" in a loop until the entire OS crashes. So then I try to debug my code BUT when I add printf statements and try to run the code again I don't get to the "fatal execption" and the entire OS just crashes. 1) why can't I add print lines? 2) what's going on with the fatal execption?
////////////////////////////////////////////////////////
// Loads program and executes it in user mode
//
#include "kernel_only.h"
[Code]....
My code in c++ is
#include<iostream.h>
main()
{int a[10],x[5];
a[-7]=15;
x[5]=20;
cout<<x[-5];
}
Following is a script written in perl :
#Number of bugs edited in Watson Express
#find server*/watson*/log/ -name "watson*" -type f -newer ./tmpoldfile ! -newer ./tmpnewfile |
xargs grep "WX Edit Bug" | awk '{print $8}' | sort | uniq | wc -l
//
this is log parsing string in perl based on bash file.
Need a log parsing program in C# for the same.....
I've written a simple program, which asks the user to respond to a YES or NO question using the character Y/y for YES and the character N/n for NO. The foundation of this program is based around several IF statements implemented to aid in finding the ASCII value of the character entered before invoking the corresponding cout statement that informs the user which character they entered. My Question: How should a program be written to deal with ignoring case sensitivity in regards to the users' input?
Here is my amateurish attempt,
Code:
#include <iostream>
using namespace std;
int main()
[Code] .....
The following are IF statements written for the program to determine whether the user answered YES or NO. The program then performs the cout statement that contains the corresponding character to the ASCII value found.
*/
if(user_input == 121 || user_input == 89)
{
if(user_input == 121)
{
cout << "
[code]......
Ben has been administering a MBTI personality test. Now he has all the responses, but the task of scoring and compiling results seems daunting. The personality test* is a series of 70 questions for which the available responses are ‘A’ and ‘B’. Based upon the answers to the 70 questions, a personality profile is determined, categorizing the degree to which the responses place the person on four scales:
Extrovert vs. Introvert (E/I)
Sensation vs. iNtuition (S/N)
Thinking vs. Feeling (T/F)
Judging vs. Perceiving (J/P).
Each of the 70 questions relates to one of the four scales, with an ‘A’ response indicating the first of the corresponding pair (E, S, T, or J) and a ‘B’ indicating the second (I, N, F, or P). For instance, an ‘A’ response on the question: At a party do you:
A. Interact with many, including strangers
B. Interact with a few, known to you indicates an Extrovert rather than an Introvert; just the opposite for a ‘B’.
For this test, each question is designed to influence one of the four scales as follows:
questions 1, 8, 15, 22, 29 … are used to determine E/I,
questions 2, 9, 16, 23, 30 … and 3, 10, 17, 24, 31 … to determine S/N,
questions 4, 11, 18, 25, 32 … and 5, 12, 19, 26, 33 … to determine T/F, and
questions 6, 13, 20, 27, 34 … and 7, 14, 21, 28, 35 … to determine J/P.
Notice these come in sequences of “every 7th” question.
The goal of the test is to determine which end of each of the four scales a person leans, and to thus classify him/her based on those leanings (e.g., as ENFJ, INTJ, etc.). Since Ben would also like an indication of how strongly the test taker fell into each of the four, the program should print the percentage of ‘A’ responses for that scale.
Input for this program should come from a file responses.txt. The first line of the file will contain a single integer, n, indicating the number of test results to follow. Each of the following n lines will contain the first name of the test taker, a single blank, his/her last name, a single blank, then the 70 responses he/she gave on the test. Although the test instructions indicate that the results are most valid when all questions are answered, sometimes respondents leave questions blank. In that case, a dash appears at the corresponding place in the list of responses.
Output for the program should be written to the file types.txt. It should include a well-formatted report listing, for each test taker, his/her name, the percentage of ‘A’ responses in each scale, and the resulting personality type. A tie within a scale should result in a dash (‘-‘) for that part of the personality type.
I am trying to stream data to a file, and then return to the file to add further data. When I add data the second time, I then want to update the value of the second byte in the whole file. I can't seem to do this!
Here is my sample code:
Code:
int a = 1;
int b = 2;
int c = 3;
int d = 4;
int e = 5;
int f = 6;
int g = 7;
int x;
fstream out1("file.dat", ios::out | ios::binary | ios::trunc);
[code]....
The output I get is "1, 2, 3, 4, 5, 6", but I want to be getting "1, 7, 3, 4, 5, 6", because in "out2", I seekp to the second integar entry, and change it to "7".
I have also tried using ios::ate in the constructor for "out2", but this gives me the out put "4, 7, 6, 6, 6, 6", which is suggesting that when I create my fstream object "in", any seekg commands are relative to the beginning of the "out2" stream, rather than the "out1" stream.
I need to find inverse of a matrix data in binary file should be used to form matrix.its not finding inverse correctly rest is working good.
Code:
#include <stdio.h>
void createbin();
void display();
void inverse();
int main()
{
createbin();
display();
inverse();
[Code] ....
I want to input data into text file while not deleting the original data in the file and I use something as
ofstream writefile;
writefile.open("example1.txt");
if (writefile.is_open()) {
for(j=0; j<N; j++) {
[Code] ....
But this will delete the original data.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
int r = 0;
int c = 0;
int num[17][15] = { 0 };
[Code] ...
// Here is my code for displaying the data from the text file into a 2d array and height next to it, but I am not able to diaplay the height from 60 to 76 next to the row of the 2d array, as shown in the table below. This is my program:
Recently the health authorities have listed a new way to calculate the body mass index (BMI) of an individual.
Values of 20 – 24 are classified as normal, 25-29 as overweight, and 30-34 as heavy.
The table below is a portion of a typical BMI table.
BMI:202122232425262728293031323334
Height:
60102108113118123128133138143149154159164169174
61106111116122127132138143148153159164169175180
.
.
.
MY task is to write a program that does the following things:
1.Produce the table by reading in the data from bmi.txt (on Moodle) into a 2-D array.
2. Display the table neatly on the screen, with row and column headings. The BMI should go from 20 to 34. The height should go from 60 to 76 inches.
3. Prompt the use for their height (in inches) and their weight.
4. Make the program print the closest BMI.
If their weight is lower than the values on the table, use 20 as the BMI.
If their weight is higher than the values on the table, use 34 as the BMI.
5.Loop the program so the user can find more BMI’s.
I'm reading from a file the middle column of data (Volts) where my test file "AP.txt" is opened by my program. Here is a segment of the data:
time Volts dV
49552 -66.20183 -0.01556807
49553 -67.76025 -0.01556495
49554 -69.30704 -0.01533247
49555 -70.81799 -0.0148486
49556 -72.26774 -0.0141133
49557 -73.63226 -0.01315276
49558 -74.89141 -0.01201764
Since the calculation I performed gives me -71.77 Volts, I need to match this value to the time that this occurs closest to using my program, and output the time that this occurs at.
Here is my program so far:
int main()
{
std::ifstream inFile;
inFile.open("AP.txt");
ofstream results_file ("maxvaluewithinput.txt");
float TimeAtdVMax = 0;
float VoltsAtdVmax = 0;
[Code]...
If you're curious, this program isn't for homework. It's part of the independent learning on C++ I'm doing for a Master's Thesis; the program will eventually model the APD90 of a ventricular action potential.
I am very very new to C++. A bit of background. I have been writing in excel vba for large number crunching, and the code is now taking quite a while to run. A friend of mine suggested i start writing in C++, so i read up on it. And downloaded Code:Blocks.
My VBA Code is:
Sub arrayss()
Dim NameArray As Variant
Dim datarray As Byte
Dim DirectionArray As Variant
Dim WinArr As Variant
[Code] .....
Ultimately i would like to recode this to C++, but my first and probably silly question is how do i get the data from Excel to use in C++. I was thinking either to put the data in 3 csv files and convert into three Arrays in C++. Or maybe create a library of the data in C++. Ultimately it is speed i am looking for, so before i start recoding i wanted to start with the best way.
The data is like this in excel: (don't know how to create a table)
ABC DCA GFE THE
15 0 1 0 1
30 1 0 1 0
45 1 1 0
00 0 0 1
15 1 1 0
15 1 0 0 1
15 0 1 1 1
30 1 0 0
45 1 1 1
So the headers would be in one array, the 15's, 30's etc would be in another array and the 1's and 0's and Empty ( i need it to record an empty cell) would be in another array...
User enters sentence "The Smiths have two daughters, three sons, two cats and one dog." (The numbers may change depending on what the user chooses to enter. He told us the range would be from zero to nine.) and we have to convert the written numbers within the sentence into actual decimal numbers and print out the new sentence. Ex. The Smiths have 2 daughters, 3 sons...etc.
I have written the following bit of code which reads the string and finds all the "written numbers" but I am not sure how to proceed from there. I am stuck on how to print out the new sentence with the converted numbers as my professor mentioned something about creating the new string using dynamic memory allocation.
Code:
#include <stdio.h>#include <string.h>
int main () {
char A[100];
int length = 0;
int i;
[Code] .....
I have written a C++ program I have multiple of CSV file used as input, which I open one at a time and close it after extracting data to a output file which is the only file.
I run getline(inFile,line);
outFile << line << endl;
I run this code, and only part of it is goes to the output file I got, also have spacing randomly to specific file and inconsistent
But when I slower the code, like system("Pause") in the loop, I can get extract what I want perfectly....
Is my program running to fast, why getline would be skipping part of what things I want?
I have this code for a computer project... (store management) but the character strings are not copied on text file..
#include<iostream.h>
#include<conio.h>
#include<fstream.h>
class Store {
public:
char *item_name[5];
store()
[Code] .....
Now when i run the program, it gives a error :::
ERROR
address 0x0
How can i write these strings to the text file?
Code:
#include <stdio.h>
#include <stdlib.h>
int main (int argc, char *argv[])
{
char buffer[256];
FILE * myfile;
myfile = fopen("read.txt","r");
[Code]...
I also got an error in printing wherein the data in read.txt is "Hello" newline "World" and my program prints world twice.
I have a program I have to do that counts the number of words in a text file. I have tried the code on 2 computers now since my programming teacher told me the code was fine. Here is my code:
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
int main() {
ifstream infile;
infile.open("tj.text" , ios::in);
[Code] .....
I am reading a file then printing the data onto the other file. It is working, however when I check to see if each variable is being properly set after reading the file a issue arises.
Example of the file being read
Code:
Vehicle PV50CAN passed camera 1 at 05:33:26.
Vehicle W867BRO passed camera 1 at 05:33:29.
Vehicle KQ63ARU passed camera 1 at 05:33:38.
Vehicle K954ITQ passed camera 1 at 05:33:40.
Vehicle V220MXB passed camera 1 at 05:33:42.
[Code] .....