C :: Logic To Find Least Common Number Combination
Nov 22, 2013
I have been struggling with this program. I am somewhat new to c and suck at logic. I have a personal program I want to make that I will try to get extra credit for in school. I have a printed set of winning lottery numbers form the last 10 years. I chose the easiest one do do logically which is just 5 numbers none repeating.
I am trying to find out how I can print the least common 10 sets. I think if there are any set which have not been picked I would have to print all of those because logically they would all be equal, then print sequentially the sets least picked up to 10.
I have pseudocode which I am sure is wrong but will post it just to show that I am trying. My first attempt was to add the numbers but quickly realized that that wouldn't work ...
5 Nums Pseudocode
Code:
Read Nums
Parse Into Ints
Make Array [185] //39+38+37+36+35 The highest the numbers added together can go
//LOGIC
[Code] ....
View 5 Replies
ADVERTISEMENT
Aug 10, 2013
For example let say there is vector [1,2,3,4,5,6,7,8,9] and let say there is int n
if i say n=3
I want to find all possible 3 combination
[1,2,3][1,2,4].....such and such
if i say n=4
[1,2,3,4][1,2,3,5]......
I want to know how you write the code depend on the input n. Is it call dynamic programming?
View 4 Replies
View Related
Jan 28, 2014
I can't seem to find the logic error in my perceptron. The perceptron's feedback function pushes back a bias of 1.0 into the input vector, and calculates the dot product of the input vector and it's weight vector, and returns 1 if the dot product is > 0, and -1 otherwise. This will determine whether the inputted point is above or below the hyperplane given by the functor.
The training function instantiates a trainer object , which feeds it a vector random numbers, along with the correct answer (in this case, whether the point is above or below the hyperplane given by a functor). It then calls the feedback function, and subtracts its answer from the correct answer, and updates the weights by adding the input vector to the weight vector, and multiplying the weight vector by the error, and by a correction factor, in this case 0.01.
Typedef.hpp
Code:
#ifndef TYPEDEF_HPP
#define TYPEDEF_HPP
#include <vector>
#include <random>
typedef std::vector<float> FloatV;
typedef std::random_device RNG;
typedef std::uniform_int_distribution<> UID;
[Code] ....
View 14 Replies
View Related
Jul 6, 2014
Im supposed to find the common characters between two string characters, assuming that the user wont input duplicate letters like ddog. When I run my code I get an output of a question mark upside down. Here is my code with comments on what each part is supposed to do
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main(){
char str1[20], str2[20],remp = ' ';
int size1,i,j,temp;
printf ("Input the first string");
[Code]...
View 6 Replies
View Related
Apr 13, 2014
I have a class 'A' which is almost perfect for my needs. Class 'B' uses class 'A' I've now designed Class 'C' and Class 'D' and noticed that there is a good chunk of code in class 'B', 'C' and 'D' for using Class 'A' is duplicated. I've separated out this code in specific, standalone functions in each of the classes. Now I'm wondering where this code should go. At the moment, the functions are duplicated in the three calling classes (B, C and D). Placing the functions into class 'A' would break the single responsibility principle. Inheritance to add functionality would likely break both SRP and LSP. The one that seems that it may work is composition.
However, Is designing a complete class just for a few functions over kill?
Would it be valid for classes 'B', 'C' and 'D' to access both the new class 'E' (which would depend on A) and the old class 'A' (which would have to be the same instance as the instance in the new class 'E'), or should the new class 'E' provide sufficient functionality so that Classes B, C and D don't need to access Class A directly? It would seem that its then an incomplete interface of the original object with additional functionality (ie, incompatible) Or should I do it a completely different way?
View 4 Replies
View Related
Nov 14, 2014
Q. WAP to find the next palindrome number larger than the input number.
for eg:-
Input=25
Output=33
The program is giving correct output for number with all digits '9';
why is it not giving output.
#include<iostream>
#include<string>
using namespace std;
int main() {
int len,flag=1,count=0,num,ind;
[code]....
View 8 Replies
View Related
Apr 20, 2015
I want to find number of comparison and number of exchanges from a list or other than a list. My list is this
12 5 11 19 4 7 8 10 9 6 22 2 9 1 32
First, I am looking for number of comparisons from a list of 10 numbers with 21inversions made by selection sort, insertion sort, exchange sort.
Also, I like to find number of exchanges from a list of 10 numbers with 21inversions made by selection sort, insertion sort, exchange sort.
View 6 Replies
View Related
Aug 20, 2014
In the c pgm to find number of digits , if I am giving 001 as the input number ,why I am not getting the no. of digits as 3?
View 2 Replies
View Related
Jul 8, 2014
This part of the code i suppose to get generate all possible combination of number and numbers and combination can't repeat. There 6 set of numbers the first 5 can't repeat, here is what I have so far. Its not efficient and is time consuming for my PC. probably will take upto 10 minutes to complete.
Code:
void Gen2(int limit){
FILE *fPtr;
struct Ticket set;
struct Ticket nSet;
struct Ticket checkSet;
int pass;
[Code] .....
The repeatCheck function returns the correct value but is just repeats constantly.
View 3 Replies
View Related
Aug 10, 2013
#include <iostream> // std::cout
#include <algorithm> // std::next_permutation, std::sort
int main () {
int myints[] = {1,2,3};
std::sort (myints,myints+3);
std::cout << "The 3! possible permutations with 3 elements:
[Code] ....
this will result
123
132
213
231
312
321
The question is : If I want to get a permutation combination with range of N
What should i do?
if N = 2
result should be 12,13,21.....such and such
Eliminate the last digit is working for 3 combination but if its going to a bigger number it does not work ...
View 5 Replies
View Related
Jul 24, 2012
ShAltGr+A represents a foreign character in a font set.
How to make a CString variable for this so it can be displayed in a text editor programmatically?
Typing the combination of course works.
View 1 Replies
View Related
Feb 23, 2014
Suppose I have to take "100" from the string "1001", whats the process to do it?
View 6 Replies
View Related
Jul 15, 2014
I am trying to find the max number entered by the user, and it should terminate when a negative number is entered. For my code, it will just end when the user inputs a lower number than the previous. i.e.- 10 20 15 "The highest number is 20" when it should be "10 20 5 40 15 -1" "The highest number is 40". No arrays or do/while loops either.
#include <iostream>
using namespace std;
int Max(int x);
int main() {
int x;
[Code] ....
View 9 Replies
View Related
Jan 1, 2014
Im about to program a RPG and, of course, the player has got an inventory. The items in this inventory are stored in a linked list and have IDs in form of strings.
player.cpp: (just the most relevant)
#include <list>
#include <string>
using namespace std;
[Code] ....
Of course, when the player saves the game, the inventory has to be saved too.
game.cpp(just the m. R.)
#include <fstream>
using namespace std;
class CGame{
[Code] .....
Now, in my code I write the linked list into the file savegames.sav
void CGame::save(CPlayer* player){
m_out.open("savegames.sav", ios::out);
m_out.write((char* ) &player->m_inventory, sizeof(player->m_inventory));
m_out.close();
}
In another function i load the list:
void CGame::load(CPlayer* player){
m_in.open("savegames.sav", ios::in);
m_in.read((char* ) player->m_inventory, sizeof(player->m_inventory));
m_in.read();
}
And when i access the loaded linked list with the .empty() function or so, Windows says the following:
<Mygame.exe> funktioniert nicht mehr (in English: doesnt run anymore).
I tried so much to fix that but i dint reach my aim.
View 2 Replies
View Related
Jul 15, 2013
I have N vectors which look like this:
[1→m] [m+1→2m] [2m+1→3m] [3m+1→4m] [4m+1→5m]..... [{(N-1)m}+1→Nm]
I want to select 1 element from each vector without duplication of any combinations. Essentially only when all combinations are done with 1st element in first vector ,only then it should move to next element in first vector.
Say i have elements :[123] [456] [789]
my combinations should be like
147
148
149
157
158
159
167
168
169
247....
Also, I cant have any repetitions and only after all combinations of 1 are done only then the loop has to move to next combination ie 247 combination and so on.
I tried NCK (n choose k) command but it gave me random combinations. How should i go about it with using minimal for loops?
View 2 Replies
View Related
Mar 24, 2013
I'm trying to write a recursive function that takes in a vector of strings that contains
"1 forward", "2 forward", "rotate left", "2 backwards" ... etc
how can I write recursive function that creates a vector of every unique combination of commands?
View 8 Replies
View Related
Oct 10, 2014
I want to read a string of unknown length from stdin. I tried to follow the approach from this link.
[URL]....
My code is like this:
Code:
#include <iostream>
#include <string>
using namespace std;
int n;
cin >> n;
cout << "The value of n is " << n << endl;
string str;
getline(cin, str);
cout << "The entereed string is " << str << endl;
What I have noticed is that if I take integer input from cin (cin >> n in the above code before getline, the control does not stop on getline to take str as input from the console. If I don't do (cin >> n) before getline then the control stops on getline and takes the string as input.
What is the best way to read from console multiple strings of unknown length in combination with the integers?
View 1 Replies
View Related
Mar 6, 2015
I am entering numbers to float ... I want program to find out, which first number is not from specific interval. How to do it ? Example: Enter input : 5 10 20 30 50 46 . 30 is invalid. Here is the code :
Code:
while(scanf("%f",&input)!=EOF || input==0) {
sum=input+sum;
if (getchar() == '
[Code]....
View 3 Replies
View Related
Apr 11, 2015
I'm having this issue where my else if statements are not working. My program only works correctly when I go into my if statement and change the first part of my array to the specific row I am trying to find ex [0][i] to [1][i].
int getMonthMax(int scores[][COLS],int month){
int highestN=0,i, j;
for (i=0;i<ROWS-1;i++){
if(scores[0][i]>highestN){
highestN=scores[0][i];
[Code] .....
View 4 Replies
View Related
Jan 7, 2012
Code:
1
121
12321
1234321
123454321 EDIT:
the above pyramid looks like a doom.i.e 1-5 will be in center.1-4(L)1-3(L)1-2(L)1(L) similarly 1-4(R) 1-3(R) 1-2(R) 1(R)
I'm partly successful in building the requirement of the program.but cant able to think the logic for the other half. how can i proceed.below is the code written in c#.
Code:
for (int i = 1; i <= 5; i++)
{
//int l = 1;
[Code]....
View 3 Replies
View Related
Jan 24, 2014
So I have a program where I solve a maze using stacks. So my display_maze function take two parameters and displays the maze according to where the x coordinate and y coordinate are.
I have an error during my move function, as my maze doesn't display for some reason
void Player::player_move() {
Stack stack;
Maze maze;
Lock taken;
// Monster monster;
stack.push_values();
[Code] ....
It should be displaying, because after debugging I discovered the problem isn't with the display_maze function.
View 1 Replies
View Related
Oct 30, 2014
So I'm trying to take some information that a user inputs and to then write it into a .txt file. The user would input a student ID followed by 4 quiz grades. I need to use nested loops for the input, a while loop for the outer and a for loop for the inner.
The data in the .txt should would look like:
studentID quiz1 quiz2 quiz3 quiz4
studentID quiz1 quiz2 quiz3 quiz4
etc.
My problem is I'm not sure how to structure the code. I have very few examples I'm working with to understand what I'm working with.
View 2 Replies
View Related
Feb 27, 2014
I was developing an exercise program for myself (note: not a project in school) to enhance my programming skills in C++ then I encountered a "logic bug" (that's how I call it :D ) I think. I googled stuffs I need to know and ended up to post my question here.
Here's the scene:
1. When using GetAsyncKeyState I can capture Function Keys [F1-F12, etc..]
2. While doing and having fun to my exercise program, I suddenly noticed that whatever key I pressed from the keyboard {example: asdfkj], it keeps the keys entered and brings to a "field" that accepts user input.
What you should do...
1. Press any key (example: asdfisdjfisdjff) then proceed to press F1. And see what happens. I don't know how to erase what I have entered before pressing F1.
here's the code.
#include <cstdlib>
#include <iostream>
#include <windows.h>
#include <string>
using namespace std;
void gotoxy();
void gotoxy( int column, int line ) {
[code]....
View 5 Replies
View Related
Oct 30, 2013
I'm trying to create program that reads in commands from an input file, and accordingly creates, connects or destroys logic gate primitives (and gates, or gates). Additionally, I'm trying to modify a previous program that I wrote to do this using QThreads, where each gate is placed in its own QThread. I'm trying to avoid using invokemethod, and I'm sure this method can work. My specific issue that I'm having trouble debugging is in my connect code block in main.cpp. Whenever I try to reference a gate specified by the input file that is NOT the true or false gate (I have one of each and they are attached to any gate that needs a true or false input), I get only a NULL reference. This includes attempting to reference the gate in my gatelist QMap. Calling gatelist.value(newCommand.at(1)) causes the program to hang, and the connect statements referencing said gate return errors about connecting a signal or slot of a NULL pointer.
Here is main.cpp:
#include <QPointer>
#include <QMap>
#include <QDebug>
#include <QString>
#include <QFile>
#include <QTextStream>
[Code] ...
My accompanying class declarations can be found here : [URL] ....
View 6 Replies
View Related
Sep 17, 2013
My issue is regardless of which date I input its always defaulting to the values I have set in my constructor in my implementation file in the else statement. So the values always default to 3/15/2006 I think its something to do with the logic in my bool function but I may be incorrect.
header
//date.h header
#include <iostream>
#include <string>
using namespace std;
enum DateFormat {numeric, standard, alternative};
const int MIN_YEAR = 1900;
const int MAX_YEAR = 2015;
[Code] ....
View 4 Replies
View Related
Nov 18, 2014
I need to create code based upon the following pseudo code:
dictionary=vector
file containing words to search for=external file
While there more words to search, for search the dictionary if the entire dictionary is searched and the word is not found, return the word, search the dictionary for the next element (and so on)
I cannot for the life of me figure out the sequence of loops to do this. The following code returns all of the words instead of just the ones not found in the dictionary, but it's all I've got after countless changes:
#include <iostream>
#include <fstream>
#include <vector>
#include <string>
using namespace std;
int main() {
string dictword;
ifstream dictionary;
[Code] ....
And it returns every word in the external file.
View 1 Replies
View Related
