For example let say there is vector [1,2,3,4,5,6,7,8,9] and let say there is int n
if i say n=3
I want to find all possible 3 combination
[1,2,3][1,2,4].....such and such
if i say n=4
[1,2,3,4][1,2,3,5]......
I want to know how you write the code depend on the input n. Is it call dynamic programming?
I have been struggling with this program. I am somewhat new to c and suck at logic. I have a personal program I want to make that I will try to get extra credit for in school. I have a printed set of winning lottery numbers form the last 10 years. I chose the easiest one do do logically which is just 5 numbers none repeating.
I am trying to find out how I can print the least common 10 sets. I think if there are any set which have not been picked I would have to print all of those because logically they would all be equal, then print sequentially the sets least picked up to 10.
I have pseudocode which I am sure is wrong but will post it just to show that I am trying. My first attempt was to add the numbers but quickly realized that that wouldn't work ...
5 Nums Pseudocode
Code:
Read Nums
Parse Into Ints
Make Array [185] //39+38+37+36+35 The highest the numbers added together can go
//LOGIC
[Code] ....
I have N vectors which look like this:
[1→m] [m+1→2m] [2m+1→3m] [3m+1→4m] [4m+1→5m]..... [{(N-1)m}+1→Nm]
I want to select 1 element from each vector without duplication of any combinations. Essentially only when all combinations are done with 1st element in first vector ,only then it should move to next element in first vector.
Say i have elements :[123] [456] [789]
my combinations should be like
147
148
149
157
158
159
167
168
169
247....
Also, I cant have any repetitions and only after all combinations of 1 are done only then the loop has to move to next combination ie 247 combination and so on.
I tried NCK (n choose k) command but it gave me random combinations. How should i go about it with using minimal for loops?
I'm trying to write a recursive function that takes in a vector of strings that contains
"1 forward", "2 forward", "rotate left", "2 backwards" ... etc
how can I write recursive function that creates a vector of every unique combination of commands?
I have asked a related question before, and it was resolved successfully. In the past, when I wanted to use std::max_element in order to find the maximum element (or even sort by using std::sort) of a vector of structures according to one of the members of the structure, all I had to do was to insert a specially designed comparison function as the third argument of the function std::max::element. But the latter comparison function naturally accepts two arguments internally.
For instance, here is a test program that successfully finds the maximum according to just one member of the structure:
Code:
#include <iostream>
#include <string>
#include <vector>
#include <algorithm>
[Code] ....
And the output was this, as expected:
Maximum element S.a of vector<S> vec is at: 9
[I]max element of vec.a between slot 3 and slot 6 is: 6, and its index is: 6 vec[6].a = 6
[I]max element of vec.a between slot 4 and slot 7 is: 7, and its index is: 7 vec[7].a = 7
[I]max element of vec.a between slot 5 and slot 8 is: 8, and its index is: 8 vec[8].a = 8
[I]max element of vec.a between slot 6 and slot 9 is: 9, and its index is: 9 vec[9].a = 9
However, I now need to search and find an element of vector<myStruct> according to just one member of myStruct, instead of finding the maximum or sorting as before. This presents a problem because the function std::find does not accept such a comparison function as its third argument.
This was the description of the std::find function that I found: find - C++ Reference
Code:
template <class InputIterator, class T> InputIterator find (InputIterator first, InputIterator last, const T& val);
I could also find another function called std::find_if, but this only accepts a unary predicate like this: find_if - C++ Reference
Code:
template <class InputIterator, class UnaryPredicate> InputIterator find_if (InputIterator first, InputIterator last, UnaryPredicate pred);
And once again this is either inadequate of I don't see how to use it directly, because for the third argument I would like to insert a function that takes two arguments with a syntax like this:
Code:
int x=7;
std::vector<S>::iterator result;
result = std::find(vec.begin(), vec.end(), []( const (int x, const S & S_1) { return ( x == S_1.a ) ; } ) ;
Is there another std function that I can use to make search and find an element according to just one member of myStruct?
Or perhaps there is a clever way to pass two arguments to the unary predicate.
So the program reads contents from a text file into a vector and then the user enters in a string that they want to search for. The program iterates through the vector to find the string and then saves that line to another vector to display later(incase there is more then 1 instance of the string found).
Here is what I have atm:
void doSearch(vector<string> &phonelist, string searcher, vector<string> &holdNumbers)
{
int i = 0;
string value;
[Code].....
I just get an R6010 error -abort() has been called.
Im currently trying to find the mode of a vector through a map but am not sure how to do so besides the attempt ive made
void mode(vector<double>v)
{
map<double, int> map;
[Code]....
Ok my assignment has me doing vector math with some canned code provided for me by the instructor This is the header file to the class I'm working with and the .cpp file as far as I've gotten it.
#pragma once
#include "Scalar.h"
class Vector2D {
public:
Vector2D();
Vector2D( const Vector2D& ) ;// copy constructor
Vector2D( Scalar element[2] ) ; // initialize with an array
[Code] ....
I'm having trouble seeing which data members I'm multiplying together and what the initial state, continuing state, and after loop action I'm supposed to be using in the for loop.
I defined the following function to find out the iterator of a certain value in the vector. I defined it as such so if the value exist in the vector then return a iterator of it, if not then return a pointer pointing to nonsense.:
vector<tIndex_t>::iterator unlabelTit(const tIndex_t index) {
for(vector<tIndex_t>::iterator it=unlabelT.begin(); it<unlabelT.end(); it++) {
if(index==*it) return it;
} return NULL;
}
But looks this one is not accepted by compiler, saying I cannot do this kind of comparison like:
unlabelTit(i)!=NULL;
so I just delete the return NULL; and then the compiler giving me warning about no return statement before }.
a pointer pointing to nonsense? how to do that?
I have this class I have been working with,
Code:
// objects to hold results, row id, and name
class result_holder {
public:
// initialize class members
result_holder() : row_id(0), row_value(0.0), row_name("") { }
[Code] ....
There are cases where I need to find an object based on the value of row_id and delete the object from the vector row_results. I could find the proper object by looping through the vector and testing against each member.
Code:
// id I am looking for
unsigned int id_to_delete = 12;
for(i=0; i<row_results.size(); i++) {
if(id_to_delete == row_results[i].row_id) {
delete row_results[i];
}
}
I have used find before to find the position in a vector with a specific value, but I don't know how to use find to locate a specific value for an object member.
Also, is delete what I need to get rid of the object or should I be using erase as in,
Code:
// id I am looking for
unsigned int id_to_delete = 12;
for(i=0; i<row_results.size(); i++) {
if(id_to_delete == row_results[i].row_id) {
row_results.erase(row_results.begin()+i);
}
}
This part of the code i suppose to get generate all possible combination of number and numbers and combination can't repeat. There 6 set of numbers the first 5 can't repeat, here is what I have so far. Its not efficient and is time consuming for my PC. probably will take upto 10 minutes to complete.
Code:
void Gen2(int limit){
FILE *fPtr;
struct Ticket set;
struct Ticket nSet;
struct Ticket checkSet;
int pass;
[Code] .....
The repeatCheck function returns the correct value but is just repeats constantly.
I'm trying to sort my vector, find duplicate values using unique and erase them. Program can compile successfully but the duplicates are not removed.
output:
x: 3
y: 2
x: 6
y: 4
x: 3
y: 2
vector<Point2D> p2dvector;
void readData()
[Code].....
I also have operator== in my Point2D class which I understand it is required to use unique for vector.
bool operator==(const Point2D& lhs, const Point2D& rhs)
{
return lhs.x == rhs.y;
}
Okay, so for an assignment I need to write a function called find() that returns a reference to a vector. So I have vector <int> & find(string & key); If I do this, I get the obvious warning warning: reference to local variable 'lineNum' returned [enabled by default].
If I do vector<int> & find(string & key) const; I get a huge error that starts out like
In member function 'std::vector<int>& index_table::find(std::string&) const':
indextable.cpp:74:30: error: no match for 'operator='
Am I using the const identifier incorrectly?
I want to build a server which holds hundreds of thousands of active users in memory. To keep all the users organized i would like to store them in a Vector.
The problem is how i could quickly and easy find the object whenever i need it? All users will have a unique ID. Would it be possible to keep some form of a Vector Index on the unique id number?
This program is to solve a word maze and find the number of words in the maze from a dictionary file.
The program runs, but stops by finding 1,2 and 3 letter words.
#include<iostream>
#include<vector>
#include<fstream>
#include<algorithm>
#include<string>
using namespace std;
int main() {
vector <string> dict,forward,reverse;
[Code] .....
I also tried to find words using the entire vector as a container, the synopsis code that also did not work is below
while(j<dict.size()) {
if(dict[j].size()>2) {
if (std::find(forward.begin(), forward.end(), dict[j]) != forward.end()) {
cout<<"found word "<<dict[j]<<endl;
[Code] ....
Attached File(s)
dumpling2.txt (2.54K)
Dictionary.txt (718.34K)
#include <iostream> // std::cout
#include <algorithm> // std::next_permutation, std::sort
int main () {
int myints[] = {1,2,3};
std::sort (myints,myints+3);
std::cout << "The 3! possible permutations with 3 elements:
[Code] ....
this will result
123
132
213
231
312
321
The question is : If I want to get a permutation combination with range of N
What should i do?
if N = 2
result should be 12,13,21.....such and such
Eliminate the last digit is working for 3 combination but if its going to a bigger number it does not work ...
ShAltGr+A represents a foreign character in a font set.
How to make a CString variable for this so it can be displayed in a text editor programmatically?
Typing the combination of course works.
Lets say that i have the coordinates of a 2D space (x and y), I want to store the coordinates as x and y in a vector to find the nearest neighbor of given points like i have:
#3.57 3.18#
#84.91 27.69
#93.40 4.62
#67.87 9.71
#75.77 82.35
#74.31 69.48
#39.22 31.71
#65.55 95.02
#17.12 3.44
#70.60 43.87
Each coordinates is like x y and it shows points 1 to 10 (like 3.57 3.18 is point 1 in 2D space ). My question is that how i add all x and y coordinates in vector? I started like this;
`struct point{
int x;
int y;
[Code] ....
Suppose I have to take "100" from the string "1001", whats the process to do it?
View 6 Replies View RelatedIm about to program a RPG and, of course, the player has got an inventory. The items in this inventory are stored in a linked list and have IDs in form of strings.
player.cpp: (just the most relevant)
#include <list>
#include <string>
using namespace std;
[Code] ....
Of course, when the player saves the game, the inventory has to be saved too.
game.cpp(just the m. R.)
#include <fstream>
using namespace std;
class CGame{
[Code] .....
Now, in my code I write the linked list into the file savegames.sav
void CGame::save(CPlayer* player){
m_out.open("savegames.sav", ios::out);
m_out.write((char* ) &player->m_inventory, sizeof(player->m_inventory));
m_out.close();
}
In another function i load the list:
void CGame::load(CPlayer* player){
m_in.open("savegames.sav", ios::in);
m_in.read((char* ) player->m_inventory, sizeof(player->m_inventory));
m_in.read();
}
And when i access the loaded linked list with the .empty() function or so, Windows says the following:
<Mygame.exe> funktioniert nicht mehr (in English: doesnt run anymore).
I tried so much to fix that but i dint reach my aim.
I want to read a string of unknown length from stdin. I tried to follow the approach from this link.
[URL]....
My code is like this:
Code:
#include <iostream>
#include <string>
using namespace std;
int n;
cin >> n;
cout << "The value of n is " << n << endl;
string str;
getline(cin, str);
cout << "The entereed string is " << str << endl;
What I have noticed is that if I take integer input from cin (cin >> n in the above code before getline, the control does not stop on getline to take str as input from the console. If I don't do (cin >> n) before getline then the control stops on getline and takes the string as input.
What is the best way to read from console multiple strings of unknown length in combination with the integers?
I have a paradigm in a loop of queues of a vector,if a condition is true,increase sizes of the queue of that particular queue in the loop of queues, if condition is false, the queuesize is left as such in loop of queues. After this operation i need to search the queue sizes of all queues and enqueue in the shortest queue.
I want to do something like the code given below
#include <vector>
#include <queue>
int min_index = 0;
std::vector<std::queue<int> > q
std::size_t size = q.size();
[Code] ....
How to implement this logic?
will q[i].size=q[i].size+5 increase the queuesize by 5 for the ith queue?
How to output vector contents using the push_back function. My program reads in values just fine, but it does not output anything and I've been stuck on why.
here is my code:
#include <iostream>
#include <array>
#include <vector>
using namespace std;
int duplicate( vector < int > &vector1, const int value, const int counter)
[Code].....
I have a cpp app that reads in a number of files and writes revised output. The app doesn't seem to be able to open a file with a ' in the file name, such as,
N,N'-dimethylethylenediamine.mol
This is the function that opens the file :
Code:
// opens mol file, reads in rows to string vector and returns vector
vector<string> get_mol_file(string& filePath) {
vector<string> mol_file;
string new_mol_line;
// create an input stream and open the mol file
ifstream read_mol_input;
read_mol_input.open( filePath.c_str() );
[Code] ....
The path to the file is passed as a cpp string and the c version is used to open the file. Do I need to handle this as a special case? It is possible that there could be " as well, parenthesis, etc.
I need to create a class vector as a template and define operations on vectors.
And this is what I made.
#include<iostream>
using namespace std;
template<class T>
[Code].....
Lets say that I have a vector of vector of integers. <1,2,3,4> , <5,6,7,8>, <10,11,12,13>
How do I make a function that creates vector of vector of every different integers?
<1,5,10> , <1,5,11>, <1,5,12>, <1,5,13>
<1,6,10> , <1,6,11>, <1,6,12>, <1,6,13>
<1,7,10> , <1,7,11>, <1,7,12>, <1,7,13>
<1,8,10>, <1,8,11>, <1,8,12>, <1,8, 13>
<2,5,10>, <2,5,11>, <2,5,12>, <2,5,13>
and so on...