I'm trying to display data from a text file named ace_data.txt. Here's a preview of the first three lines i want to display:
2001 106 15
2002 65 12
2003 175 16
So basically, here is what my code looks like...
Code:
#define FILENAME "ace_data.txt"
int main (void) {
FILE *inp,
*outp;
[Code] ....
And nothing is displayed when i run the program. I feel like I made some mistake with the fopen() and fscanf() functions but I'm not so sure how to correct them.
#include <iostream> #include <fstream> using namespace std; int main() { int r = 0; int c = 0; int num[17][15] = { 0 }; [Code] ...
// Here is my code for displaying the data from the text file into a 2d array and height next to it, but I am not able to diaplay the height from 60 to 76 next to the row of the 2d array, as shown in the table below. This is my program:
Recently the health authorities have listed a new way to calculate the body mass index (BMI) of an individual. Values of 20 – 24 are classified as normal, 25-29 as overweight, and 30-34 as heavy.
The table below is a portion of a typical BMI table.
I am currently working on a problem where I read a file into a 2D array, and display data. If you saw my code earlier, this is the same problem, but I am now further along.
The file (90 characters) looks like this: S R R S R R R R S S ....
The "R" resembles rainy days, the "S" resembles sunny days, and the "C" resembles cloudy days. There are 90 characters in the file. The first 30 are for the month of June, the next 30 are for the month of July, and the last 30 are for the month of August. The 31st day of the months are NOT included.
I read the data into a 3 x 30 array, where the row indicates the month (0 = June, 1 = July, 2 = August) and the column indicates the number of days in each month.
Now I need to create a function that creates a report and displays, for each month AND for the whole 3 month period: 1) The number of rainy days 2) The number of cloudy days 3) The number of sunny days 4) Which of the 3 months had the largest number of rainy days
Here is my code so far:
#include <iostream> #include <fstream> #include <string> using namespace std; const int MONTHS = 3;//Number of months
[Code] .....
There are no compiling errors, but I am not getting the data I want. My rCount and cCount variables end up being 0, and my sCount variable is 90.
i cant display the data written to this file in a switch statement (case 2) what am i doing wrong..the file data is being written into the text file but i cant display it
I want to display data from text file in list view and in tree view root will be file name, but i dont know how to do it, the problem is with displaying text file data in list view, i don't know anything about that. text file data is very simple. It is just a square matrix of double values like:
I am writing a program to display values from a data file as an image. But I can only get a blue screen. Here is a small program resembling my code. what I have missed? I only changed OnDraw function.
A company uses two text files: one to store employees' details and another to log their sign in/out time.
The details file - called details.txt" has the following format: ID, Name, Date of Birth, SSN, Department, Position - separated by spaces.
An extract from the file looks like this:
10 alice 4/23/1972 123-45-6789 support assistant 3 bob 6/7/1980 111-12-1134 logistics manager 1 carol 10/2/1963 987-123-1143 admin ceo 2 dave 10/3/1974 902-22-8914 admin cfo 17 erin 6/13/1991 126-83-1942 technology supervisor 15 frank 2/22/1987 303-12-1122 logistics assistant
"timelog.txt" contains daily logs of when employees arrive and leave. It has the following format: ID, Date, Arrival Time, Departure Time - separated by spaces. An extract from the file looks like this:
I have to write a program that searches for specific records using some search parameter, and displays them. Ok first i have to read the data from the files and store them. this is what i have so far....
#include <iostream> //Accesses libaries for console input and output #include <fstream> //Needed to access the fstream object to read files #include <string> //Needed to access the string class #include <cstdlib>
[Code] ....
I know my class and array code is totally wrong i dont know how to store the data for the info is in integer and string form... do i use strings, arrays?
I want to display my data in rich-text box in the tree like structure,i fetch the data from the data base MSACCESS & i want to print it on my rich-textbox, what can i do ?
I haven't seen it anywhere and I've been looking. Is it possible to display data, say in a CEdit field in a dialog as soon as the dialog starts? Either before or after DoModal is fine.. These are essentially the same.
Using Visual Studio 2013 - trial version. It's nice. Coming from VC6. Many things are familiar (so far), at least in the C++ part.
But the output rows are not aligned as shown in the attached picture. There a two problems.
1. Data rows don't align with the header row. 2. When the first element of a row changes to two digits, the other elements are shifted.
According to MSDN [URL] ...., CString::Format() works the same way as printf(). I wrote a small program using printf() to do the same thing, and the output in the console are perfectly aligned.
Ben has been administering a MBTI personality test. Now he has all the responses, but the task of scoring and compiling results seems daunting. The personality test* is a series of 70 questions for which the available responses are ‘A’ and ‘B’. Based upon the answers to the 70 questions, a personality profile is determined, categorizing the degree to which the responses place the person on four scales:
Extrovert vs. Introvert (E/I) Sensation vs. iNtuition (S/N) Thinking vs. Feeling (T/F) Judging vs. Perceiving (J/P).
Each of the 70 questions relates to one of the four scales, with an ‘A’ response indicating the first of the corresponding pair (E, S, T, or J) and a ‘B’ indicating the second (I, N, F, or P). For instance, an ‘A’ response on the question: At a party do you:
A. Interact with many, including strangers B. Interact with a few, known to you indicates an Extrovert rather than an Introvert; just the opposite for a ‘B’.
For this test, each question is designed to influence one of the four scales as follows: questions 1, 8, 15, 22, 29 … are used to determine E/I, questions 2, 9, 16, 23, 30 … and 3, 10, 17, 24, 31 … to determine S/N, questions 4, 11, 18, 25, 32 … and 5, 12, 19, 26, 33 … to determine T/F, and questions 6, 13, 20, 27, 34 … and 7, 14, 21, 28, 35 … to determine J/P. Notice these come in sequences of “every 7th” question.
The goal of the test is to determine which end of each of the four scales a person leans, and to thus classify him/her based on those leanings (e.g., as ENFJ, INTJ, etc.). Since Ben would also like an indication of how strongly the test taker fell into each of the four, the program should print the percentage of ‘A’ responses for that scale.
Input for this program should come from a file responses.txt. The first line of the file will contain a single integer, n, indicating the number of test results to follow. Each of the following n lines will contain the first name of the test taker, a single blank, his/her last name, a single blank, then the 70 responses he/she gave on the test. Although the test instructions indicate that the results are most valid when all questions are answered, sometimes respondents leave questions blank. In that case, a dash appears at the corresponding place in the list of responses.
Output for the program should be written to the file types.txt. It should include a well-formatted report listing, for each test taker, his/her name, the percentage of ‘A’ responses in each scale, and the resulting personality type. A tie within a scale should result in a dash (‘-‘) for that part of the personality type.
I am trying to stream data to a file, and then return to the file to add further data. When I add data the second time, I then want to update the value of the second byte in the whole file. I can't seem to do this!
Here is my sample code:
Code: int a = 1; int b = 2; int c = 3; int d = 4; int e = 5; int f = 6; int g = 7; int x; fstream out1("file.dat", ios::out | ios::binary | ios::trunc);
[code]....
The output I get is "1, 2, 3, 4, 5, 6", but I want to be getting "1, 7, 3, 4, 5, 6", because in "out2", I seekp to the second integar entry, and change it to "7".
I have also tried using ios::ate in the constructor for "out2", but this gives me the out put "4, 7, 6, 6, 6, 6", which is suggesting that when I create my fstream object "in", any seekg commands are relative to the beginning of the "out2" stream, rather than the "out1" stream.
Since the calculation I performed gives me -71.77 Volts, I need to match this value to the time that this occurs closest to using my program, and output the time that this occurs at.
Here is my program so far: int main() { std::ifstream inFile; inFile.open("AP.txt"); ofstream results_file ("maxvaluewithinput.txt"); float TimeAtdVMax = 0; float VoltsAtdVmax = 0;
[Code]...
If you're curious, this program isn't for homework. It's part of the independent learning on C++ I'm doing for a Master's Thesis; the program will eventually model the APD90 of a ventricular action potential.
I am very very new to C++. A bit of background. I have been writing in excel vba for large number crunching, and the code is now taking quite a while to run. A friend of mine suggested i start writing in C++, so i read up on it. And downloaded Code:Blocks.
My VBA Code is:
Sub arrayss() Dim NameArray As Variant Dim datarray As Byte Dim DirectionArray As Variant Dim WinArr As Variant
[Code] .....
Ultimately i would like to recode this to C++, but my first and probably silly question is how do i get the data from Excel to use in C++. I was thinking either to put the data in 3 csv files and convert into three Arrays in C++. Or maybe create a library of the data in C++. Ultimately it is speed i am looking for, so before i start recoding i wanted to start with the best way.
The data is like this in excel: (don't know how to create a table)
So the headers would be in one array, the 15's, 30's etc would be in another array and the 1's and 0's and Empty ( i need it to record an empty cell) would be in another array...
How can i display a string per line on the .txt i made? There are 2 .txt files, the one has: John Finn Xach The other is: password1 password2 password3 Question is: How can i display, let's say, i input "John" so it will display something like this "John's password is password1" or if i input Xach, "Xach's password is password3" When i use something like :
how to read and display the content of a text file in my console application using C++. The file contains 25 lines and 3 columns. The first column is "Rank" (numerical values from 1 to 25) the second column is "Name" (25 teams name) and the third column "value" has the amount of point each team is worth. Looking for code for reading and displaying all this information ....
Write a program that reads from total.dat file and displays its contents to the console. The program should allow the user to add new entries to the file.
So far this is what I've got and I'm not sure if I even started right.
#include <iostream> #include <fstream> using namespace std; int main () { ifstream dataIn; ofstream dataOut; dataIn.open("total.dat"); cout << dataIn; return 0; }
I am currently doing a complex number calculator ,and i wish to output my data to a txt.file . i tried fstream and it doesnt work. However the txt.file was created but no text was output.
Below is the program:
#include<iomanip> #include<cmath> #include<iostream> #include<fstream> using namespace std; #define PI 3.14159265358979323 double z,x;
[Code]..
When impedance A & B are in series,the effective Impedance is " <<setprecision(4)<< z << " + j" <<setprecision(3)<< x<<endl;
else cout << "
When impedance A & B are in series,the effective Impedance is " <<setprecision(4)<<z << " - j" <<setprecision(3)<< x*(-1)<<endl; } void Complex::showdiv(double &z,double &x) { if ( x>= 0 ) cout << "
When impedance A & B are in parallel,the effective Impedance is " <<setprecision(4)<< z << " + j" <<setprecision(3)<< x <<endl; else cout << "
When impedance A & B are in parallel,the effective Impedance is " <<setprecision(4)<<z << " - j" <<setprecision(3)<< x*(-1) <<endl; }
class Polar:public Complex //inheritant from class Complex { protected: double r,d,r2,d2; public: void PolarValue(); void ShowPolar();
I have learnt about string class, file I/O and pointers. Now I am asked to write a program that includes the above topics, basically testing the ability to use dynamic arrays.
I've got 2 documents, namely "Students.txt" and "EnrollRecords.txt". "Students.txt" includes 40 students' info, which are university ID, programme names and their names. These 40 students are all BEng but from different departments.
E.g. 20141129 BEng(Civil) Tom Jerry
"EnrollRecords.txt" includes 166 data, which are course codes, university ID, respective scores in the test and GPA. In this document, the same student can have several scores of different courses' tests. So their uids repeat in it. And this document only contains the data of the Department of Computer Science. So students exist in the "Students.txt" may not exist in this document.
So my task is that the user enter a name (e.g. John), then the programme will know to find John and his uid, and get all the GPA of the courses that he has taken to calculate the average GPA.
E.g. 20147777 BEng(CompSc) John David //this is a John we are looking for in the "Students.txt"
//line 15 COMP1220 20147777 90 4 //so we find 3 courses in "ErollRecords.txt" that John has taken //line 50 COMP1500 20147777 85 3.3 //line 88 ENGG2012 2014777 70 2.3
The programme should display :
20147777 3.2
To able to do anything for this task, I am asked to define 4 struct types:
struct Student { int uid; string programme; string name;
[Code] ....
So now I am going to write a function queryD(Database d, string searchName) and any necessary functions in it. I am able to do the search part,
void queryD(Database d, string searchName) { for (int i = 0; i < d.numberOfStudents; i++) { if (d.students[i].name.substr(0, searchName.length()) == searchName) { match_uid(d);
[Code] ....
But I struggle in how to match the uid in "Students.txt" and "EnrollRecords.txt" . Because there are repeated data for the same student in "ErollRecords.txt". So how am I gonna be able to match the uid and do the calculation? I get stuck in the for loop part...
