The code is supposed to display the total and averages of the data as well, but cuts off due to an error in the code.
Since this code is quite lengthy, I will be breaking it up into two posts.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
[Code].....
The code is supposed to display the total and averages of the data as well, but cuts off due to an error in the code. The code should also:
1)Print checks for all employees, one per page, sorted by lastname. The first check number, 100, is to be read from a company data file (see requirement 4). The border of each check is important and should not be omitted.
2)Convert the net pay to a text string for each check printed.
3)Print a reference code on each check. The reference code is obtained by combining the first letter of the lastname with all the consonants remaining after removing all vowels (a,e,i,o,u).
4)Use the same employee data found in assignment 2. Use company data, obtained from a text file, for each check printed:
Spoiler
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
typedef short BOOLEAN;
typedef char STR15[15 + 1];
typedef char STR10[10 + 1];
typedef struct PayRecord
[Code] .....
Goal: Use a struct that has 4 fields, input to those fields, and pass to function to display.
Problem: (38) : error C2365: 'displaySData' : redefinition; previous definition was 'data variable'
Code:
#include <iostream>
#include <string>
using namespace std;
//prototypes
void displaySData(MovieData, MovieData);
[Code] .....
I'm fairly new to visual C++ programming in a windows form and the code displayed below works fine. However my issue is as soon as the program is running it will display "failure" on label7 as soon as the button is clicked. I understand why it is doing this as "a" is not in the textbox at this time so it reads the else line and displays the message. When I enter "a" in the textbox everything works fine and label7 changes to the right message.
private: System::Void button1_Click(System::Object^ sender, System::EventArgs^ e) {
label1->Text = "Question 1: test";
label2->Text = "A. test";
label3->Text = "B. test";
label4->Text = "C. test";
[code].....
I have been stuck at a dead end,I got it to display a single asterik for an inputted number, but how would i go about in adding that asterik for each number?
my code is the following
int userinput = int.Parse(InputOutput.GetInput("Enter values into array"));
Int32[] inputChoices = new Int32[9];
for (int x = 0; x < inputChoices.Length; x++) {
inputChoices[x] = 0;
} if (userinput == 1)
[Code]...
I need to have a program display an error message if the variable entered isn't an integer but then I want it to cin again. I have this but it doesn't work:
cout << "Enter an Integer: " ;
for (;;) {
cin >> var;
if (!cin) {
[Code] ....
I am not sure how to do what I want and this doesn't work, it just repeats That wasn't an int.. over and over again.
If the user puts in a 6. I need the array to display the even number from 0 - 6. Right now what it does is it displays the first six even numbers. Okay as I'm writing this I'm starting to see where my problem might be..
Code:
void sumIntegers () {
int arr[50];
int i = 0;
int num = 0;
int sum = 0;
[Code] .....
I am having problems printing "->" on the beginning of each line, im trying to do it as a loop and ending it when the user types "q". also i would like to know how to ignore text from the user when the input begings with a specific character. heres what ive done so far, and not currrently working as expected.
Code:
#include <stdio.h>
int main (void) {
char prompt;
printf("~~~ FRACTION CALCULATOR ~~~
[Code] ....
How can i write a program that allows a user to enter a size of pizza and then print the price for that size.
Example: if a user enters size ''s'' then it should display the price stored under ''s''
I'm coding a hangman game. I'm trying to store user entries so i can output them to show the user what they have already entered. Problem is that it's not display anything at all.
I'm trying to store multiple characters of course, and then display all characters stored.
char guess[27]={0};
cin >> guess[26];
int hit=0;
for(int i=0; i<len; i++) {
if( guess[26] == hidden_word[i] ) {
hit++;
select_word[i] = guess[26];
if(strcmp(hidden_word,select_word) == 0) {
[code]....
EDIT: I also get the error - Stack around the variable 'guess' was corrupted. At the end of the game.
Program that input a name horizontal and display the name in vertical position using looping any kind of looping?
EX.
INPUT:Enter A name:John
OUTPUT:
J
O
H
N
What I'm trying to do is have the user input a hex number this number will then be converted to a char and displayed to the monitor this will continue until an EOF is encountered.I have the opposite of this code done which converts a char to a hex number. The problem I'm running into is how do i get a hex number from the user I used getchar() for the char2hex program. Is there any similar function for hex numbers?
this is the code for the char2hex program
#include <stdio.h>
int main(void) {
char myChar;
int counter = 0;
while(EOF != (myChar = getchar())) {
if (myChar == '')
[Code] .....
This is what i want to the program to do except it would do this continuously
#include<stdio.h>
int main() {
char myChar;
printf("Enter any hex number: ");
scanf("%x",&myChar);
printf("Equivalent Char is: %c",myChar);
system("pause");
return 0;
}
I'm trying to code a program to read the user's input and have it:
-count vowels
-stop counting vowels after '.' or '?' (ie. abcdjwef is 1 a, 1 e; while fje.fwdfeiii is just 1 e)
-closes when ENTER is pressed after a '.' or '?' is found (ie. closes after 'abacds. ENTER' as well as 'as.fefsdf ENTER')
-display the number of vowels
Is there any way to do this with only 'cin >> userInput' and a while loop checking for punctuation?
I'm writing the program below to take an integer input for temperature and display a cheesy message for different ranges for each day of the week.
I tried using two if statements, the first to determine if the input is valid, and the else display that it was invalid and to try again.
The second set of if (if else) statements would evaluate a number input and display the cheesy message based on the value, or if it was out of range, to make you re input that days temperature.
I understand that the else statement is linked to the closest if statement, unless brackets are added to prevent this. I thought my brackets were correct, but I keep getting [Error]'else' without previous if'. The red lines are the if and else statement I'd like to be linked, and tried to do so by enclosing the 2nd if statement in brackets.
The assignment doesn't require the error checking, but if I don't use some form of it I believe it will just loop. Again I have to use the last 4 lines due to instructors rules, and have to use scanf and not strings or arrays.
This program will ask the user what the temperature will be for each day of the week. The integer input from the keyboard will be tested in a series of IF tests and a message will be printed depending on the temperature.
Code] ....
#include <stdio.h>
#define MAX 100
#define MIN 0
int main() {
int day = 1;
int temp;
[Code] ....
How do I change User Input to display in Italic font style?
Let's say user inputs a word, then display that word in italic font.
i want to display all the contents of a file excluding one based on user input say i have 4 records in the file numbered 1 to 4....the user chooses 2 to exclude it outputs records 1,3,4,4 when it should be records 1,3,4 what am i doing wrong here is the code.its basically displaying the last record in the file twice
void excludeRecord()
{
ifstream read;
read.open("Data.txt");
int recordC =0;
string fnameC = " ";
string lnameC = " ";
[Code]...
I am writing a program to display a triangular pattern using nested loops and user input for the size of the base and character used to generate the image. 99% of the program runs fine. However I am having trouble with some of my input validation.
When given an integer value for the base I can verify if it is within a certain range (0-80). However, when the user inters a "char" instead of an "int" the program enters an infinite loop.
Here is the piece of code giving me trouble. (I wont bother you with the entire chunk of code, I have commented out everything else to narrow down the problem bit)
// Pattern Displays
// program that asks user for the size of the base of a triangle and then generates it in a character the user chooses
#include <iostream>
#include <istream>
#include <string>
#include <cstdlib>
using namespace std;
int main () {
char escape;
[Code] ....
I'm suppose to write a program using (for loop) that asks the user to enter any amount of numbers, so that it can display the smallest and largest. My program successfully finds the largest, but it is always displaying 0 for the smallest, I think Im doing something wrong with the internalization but I dont know what to change it to.
This is what I have ....
#include <iostream>
using namespace std;
int main() {
int amount;
int count;
int number = 0;
int smallest = 0;
int largest = 0;
cout << "Enter total numbers to process: ";
[Code] ....
I am having a problem printing out the results for my code, It is supposed to print out the largest and smallest value in the array, but keeps giving me a value not entered and I don't know why.
//This program lets the user enter 10 numbers and then display the highest and lowest number.
#include <iostream>
#include<stdio.h>
using namespace std;
int main() {
const int NUM_ENTERED = 9;
int number[NUM_ENTERED], highestValue = number[0], lowestValue = number[0], count=0;
[Code] .....
Code:
#include <stdio.h>
main() {
int c, n1;
n1 = 0;
while ((c = getchar()) != EOF)
if (c == '')
++n1;
printf("%d", n1);
}
I have a more complicated program I'm wishing to have display the output, however, to save some time I'm using an example of a shorter version. count the lines in input and display the output in terminal when ./program is executed after compilation. To count and compute lines, words and within arrays.
ofstream infile;
infile.open("Input.txt");
if(infile.fail()) {
cout << "Error Opening File in Input" << endl;
system("pause");
exit(1);
}
So I'm trying to see if it fails, but if i change "Input" name would the computer just create a new file name of it for example if i change "Input" to "asdf" the computer is just going to create "asdf" how do i fix it.
#include<iostream.h>
#include<stdio.h>
#include<conio.h>
using namespace std;
class CV {
public:
char name;
char qualfctn;
[Code]....
The purpose of this program is to unscramble the user's input. for example if the user entered 'ftooabll' the program would print 'football'. find the error that I am making....
Now, this only works for strings that are contained in the file wordlist. That being said, I would like this to repeat this search multiple times. Currently, the process is being repeated 7 times, but it only works on the first iteration. The code and sample input/output is below.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define NUMLOOP 6
void sort_string(char*);
[Code] ....
Sample input/output: (note: all data has been verified to be in the wordlist)
Enter string:
4132dcba
abcd1234
Enter string:
4132dcba
Enter string:
4132dcba
Enter string:
4132dcba
Enter string:
4132dcba
Enter string:
4132dcba
Enter string:
4132dcba
I have not completed this program yet, but I have already run into a snag. For the Input Validation part, every time you enter a number regardless if it is positive it will still display the cout statement: "Please enter positive values". The program runs correctly where I currently am at, but it just keeps reading that statement even if a user enters a positive value. I have run the debugger, but it really is not showing me anything other than I notice it jumping to that statement after every value that is entered.
Here is my code, once again I have not finished this yet, but I would really like to get this fixed first before I continue. I will keep debugging in the meantime...
Code:
// A local zoo wants to keep track of how many pounds of food each of its three monkeys eats each day during a typical week. Write a program that stores this information in a two-dimensional 3 X 7 array, where each row represents a different monkey and each column represents a different day of the week. The program should first have the user input the data for each monkey. Then it should create a report that includes the following information:
// Average amount of food eaten per day by the whole family of monkeys.
// The least amount of food eaten during the week by any one monkey.
// The greatest amount of food eaten during the week by any one monkey.
// Input validation: Do not accept negative numbers for pounds of food eaten.
#include <iostream>
#include <iomanip>
using namespace std;
int main() {
double totalAverage = 0; // variable to store the total average, initalized to zero
[Code] ......
How do I error check if the user is inputting letters and not numbers? For example, if the user inputs "Lab.txt" I need to display an error message. If they input "Lab2part2.txt" then this is correct and what I want.
I've found a lot of information online on how to error check for numbers or a single letter (EX: 1,2,3, etc. or 'A' 'B' 'C') but nothing for actual WORDS or maybe I should refer to it as a string of characters?
Is there any way to do this? Because my program requires I ask the user to input the name of the file. But the way my code is currently set up is even when the user inputs the wrong file name it still opens the file. I want to prevent this from happening so my thought was to error check user input.
/*Program to determine company's weekly payroll*/
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
void OpenTheFile() {
ifstream inputFile;
string filename;
char letter;
int number;
[Code] .....
Im building a banking system. in my create_account it asks for account address and phone number as well as other questions. When I go to my Show account info (balance inquiry) I notice its not getting the right address as well as phone number. its showing "garbage".
Code:
/********************************************************************
* Vincent Dotts 09/29/2014 ch11.cpp *
* This program serves as a customer banking system *
*****************************HISTORY*********************************
* WHO DATE Discription *
*********************************************************************
* VD 09/30/2013 Created program *
********************************************************************/
#include<iostream>
#include<fstream>
[Code] .....