C/C++ :: Reading Image From A File?
Sep 30, 2013How to read an image in C++ ...
All what i know that i may use a Cimage library but it doesn't really work or to read the image from a file ....
ADVERTISEMENT
C/C++ :: Reading And Writing PPM File Image
Dec 7, 2014I am attempting to read a ppm file. When i do it i try to write it back in another file just to see how's done and i get a terrible result. I assume the problem is something with the casting i do to the variables.
This is my image class
Image:: Image(unsigned int width, unsigned int height, bool interleaved) {
buffer = new Component [3*width*height];
this->height=height;
this->width=width;
this->buffer=Component();
[Code] .....
Visual C++ :: Reading Image File?
Apr 26, 2013I have a jpg file. I have extracted the width and the length of the image. I have done that with some codes and markers. Now I need the image data starts as from that place i would like read the data and print the pixel value. I would like to display the pixels later.
View 2 Replies View RelatedC++ :: Image / Video Compression Project - Error In Reading File
Apr 3, 2012I have this image/video compression project that is to be done in C. I've been given this source code by my supervisor which is supposed to be a working one.
Assuming I have a sequence of 5 images in .pgm format (image41.pgm, image42.pgm .... image45.pgm). Some of the code involved is
Code:
#define START_FRAME 41
#define END_FRAME 45
#define SKIP_FRAME 1
#define INPUT_STRING "/home/folder/image%03d"
int main(){
int frameNo = START_FRAME
nx=1920, ny=1080;
char fileName[128];
[Code] ....
When I tried to compile the code using make file (shell script), I got this error message "In function 'readPgm' format '%d' expects argument of type 'int *', but argument 3 has type 'unsigned char *' "
Can identify what the problem is and how to rectify it?
C :: Reading PPM Image Into 1D Or 2D Array
Apr 4, 2013I have an assignment where I need to take an assigned image, rotate it 90 degrees to the right, flip it upside down, and turn it to grayscale; each with different outputs.
I was thinking if I can read in the image into a 2d array //array[height][width] or even just an array with the values of each pixel (r, g, b), I can just modify the array and spit it out when done.
if i can just get it into the array, I think I'll be fine. We've done similar assignments with modifying arrays for grayscale images and the other two I can probably figure out. But how am I going to read in each pixel into an array with three different values in each slot? This is my code so far:
Code:
#include<stdio.h>
C :: Reading PPM Image Into 2 Dimensional Array
Nov 29, 2014I'm trying to read a PPM image into an array. The header will have already been read in and I'm trying to put in a 2-d array to make manipulations easier. This is the code I have so far with LOTS of errors and warnings and I honestly don't know what almost any of them mean.
Code:
int imageArray( FILE *input, struct pixel *theArray ){
int i, j;
int col, row;
int *imageArray = (int**)malloc(row * sizeof(int*));
for(i=0; i<row; i++){
[Code]...
Visual C++ :: Extract Portion Out By Reading Binary Image?
Apr 10, 2013I need to know about image processing whether it can be done using C /c++ as I am not familiar with MATLAB. I have attached one image. The arrow in the image show the indented circular portion. I need to crop out only the portion inside the indented portion. I think there should be a sharp difference in gradient intensity in pixel at the indented portion. Is it possible to extract that portion out by reading the binary image?
View 2 Replies View RelatedC# :: Compare The Image Of A Button To Another Image In Visual Studio
Jul 3, 2014Im trying to compare the image of a button to another image in Visual Studio like so...
//variables
Image active = Image.FromFile("C:\Users\Ethan\Desktop\StarWars Status\active.png");
Image stunned = Image.FromFile("C:\Users\Ethan\Desktop\StarWars Status\stunned.png");
[Code]...
btnStatusPlr1.Image SHOULD come back as True.Then I realized it might not be the same as setting the buttons image in the properties (Which is what i did to get the original image (the one being compared to))
I do have a feeling ive done something wrong here (Yes im a noob /> )
Variable active, is the same image as the buttons default (Well should be)
C++ :: Run Image (GIF File) Through CMD
Apr 6, 2014I would like to know if it possible to "run" an image through CMD.In other words i want that image to be opened on CMD.
BTW the image which i am more intrested is GIF files.
C/C++ :: How To Print PPM Image From A File
Apr 6, 2015I have an assignment to manipulate a ppm image which I'm having a lot of difficulty with and I have to have a function to print the ppm but I dont know how to send the ppm file to said function for printing.
#include "transform.h"
int print(void){
int i;
printf("P6
");
printf("%d %d
", g_width, g_height);
printf("22
");
}
C :: How To Work With 2D Arrays And Image File
Jun 3, 2013This is the first time I'm working with 2d arrays and I have to read the pixels in the input file, then store the pixel from the input image file into the array. And there is a maximum width and height of 500. If the file's too big, then I have to print an error message. Also, my array should only be filled up to the dimensions of the input image file.
I have the code for everything up to that point but I'm not too sure how to approach this. I've defined max_width and height at the top of my file as 500 and I'm thinking of putting this part of the program into a new helper function. But I'm not completely sure how to start, I do know that the array would look something like this though:
int array[max_height][max_width].
1) the syntax of printing the error message/storing the values and 2) the values for my pixels in the input file are all in a single column; each value after the ppm format header is on a new line.
what the input file looks like:
Code:
P3
493 401
255
71
0
0
76
4
5
87
11
NOTE: First three lines are the header information for the ppm format; the numbers that follow go like this: red, green, blue, red, green, blue, etc.
C++ :: Manipulate Image File At Runtime
Oct 20, 2013I've come to a point where I want to manipulate an image file at run time or with pre-determine sizes and have to be applied when the windows is moved or through in program options.
I know I can do the applying part. However I am a little unsure of how to tackle the image manipulation. I want to make it so that it is not os dependant. So I know I can not rely on any os functions. The only other thought that came to mind was to deal with the video card itself.
So the main question after all of that is said and done. How is c++ able to interact with the video card directly for images? Or if there are existing function I can use. How do they do that? If I can use existing function I would like to be able to manipulate it myself.
C/C++ :: Create Image And Output It As PPM File
Jan 26, 2015I have an assignment where I have to create an image and output it as a .ppm file. It has to have a black background and have some letters in a different color. My professor told me that my .ppm header should have p3 600 300 255 and P6 600 300 255(what this means, think it sets up the width x height which should be 300 x 600).
This is what I have so far:
#include <iostream>
#include <fstream>
using namespace std;
int main() {
struct pixel {
unsigned char red;
[Code] ....
Problem in first for loop and what it should look like inside of the for loop, after that I should be able to figure this out... with the fstream (how to output the results in a .ppm file).
C++ :: PPM Image File Magic Number And Max Color Value
Feb 28, 2015When reading a PPM Image file, how would I find the magic number and the max color value?
int main() {
string imageFileName;
ifstream image;
imageFileName = "C:UsersDesktopdrink.ppm";
image.open(imageFileName.c_str(), ifstream::binary);
[Code] ....
The code gives me seemingly logical integer values for size, width and height. But how would I find the max color value and so called "magic number" for this PPM image file?
C/C++ :: Convert 256 Color BMP Image To TXT File Of Array Of 0 - 255
Feb 5, 2015I am working on a program which turns a 256 color bmp image to a txt file of a array of 0-255. I wrote this:
#include<iostream>
#include<fstream>
// if 1 , see bmp file header info
#if 1
#define SEE_INFO
#endif
using namespace std;
[Code] ....
Something weird happened. When I use it on simple.bmp (Attachment), it works fine. But when I use it on flower.bmp , it just give me zeros.
Attached File(s)
simple.bmp (3.39K)
simple.txt (8.47K)
flower.bmp (76.05K)
flower.txt (150.49K)
Visual C++ :: Unable To Read LCT File To BMP Image
Nov 20, 2014I have an *.lct file. I like to read *.lct file and save an bmp image.
I can not read this file using usual file read.
Code:
void CLCTtoBMPDlg::OnBnClickedReadlctfile() {
CFileException CFileEx;
CStdioFile ReadFile;
CString OpenlctfilePath;
TCHAR szFilters[]= _T("LCT Files (*.lct)");
CFileDialog fileDlg(TRUE, _T("bmp"), _T("*.lct"), OFN_FILEMUSTEXIST | OFN_HIDEREADONLY, szFilters);
[Code]...
Find the attachment. change the file extension *.lct instead of *.txt. I like to read ASCII Data into Hex, Example : Data "A" as "41" (Refer the jpeg image). How is possible?
C++ :: Scanning A Header File To Save Image Data
Jun 11, 2013I'm trying to read from a header file to take the image dimensions and other variables but I don't understand how to iterate through the "key" so it saves each line.
This is what the header file will always look like:
!INTERFILE :=
!imaging modality := nucmed
!version of keys := 3.3
;
!GENERAL DATA :=
[Code].....
Ideally it would just skip the keys that aren't wanted and keep moving through the lines. Should there be a for loop for the key (and if so, how does that work with pointers?) or should this method just be scratched...
C++ :: Convert File (Audio / Image / Video) To Base64?
Sep 7, 2014I'm looking to convert audio, images, video to base64 in c++, and through many searches on the web I've only seem to come up with string > base64.
When I view a .mp3 file for example, there are many characters there that are not available to be used in my string to encode.
[URL] ....
I have this code set up in my project, and all I want is to be able to give the location of any file and have it encode (could just encode to a string, I can handle writing it to a file), and then give a location to put the decoded file as well.
I'm not sure exactly where to even start.
C Sharp :: How To Access Raw Image Data In Resource File
Nov 14, 2012I have a .png file that my console app reads and puts into a structure that is saved as a file. The png is always the same so I thought I could just add it as a resource image to a resource file so it would be included in my program and not as a separate file. When I did that, the png shows up as a "SystemDrawingBitmap". If I examine this resource in a watch I see "Base" and "Static" members. Expanding those properties does not give me anything useful such as a pointer to the raw png data and its length in bytes.
If worse comes to worse, I can always make a hex dump of the png contents and then put the hex code into a CS file using static initialization.
Surely there is some way I can access the raw data internally and read the bytes into a byte array using C#
Visual C++ :: Program To Display Values From Data File As Image?
Jul 29, 2014I am writing a program to display values from a data file as an image. But I can only get a blue screen. Here is a small program resembling my code. what I have missed? I only changed OnDraw function.
Code:
void CColorDisplayView::OnDraw(CDC* pDC) {
CColorDisplayDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
if (!pDoc)
return;
CRect rect;
[code].....
C++ :: Print Custom Area Of Screen - Save As Image File
Sep 9, 2014I am trying to automatically(periodically) print screen a custom area of the screen, save it as an image file (the image will have the same format always), and then use OCR to get the text in the image as usable string variables. Is this doable? I was looking into tesseract OCR but I find it a bit unclear.
View 10 Replies View RelatedC :: Reading From A File And Skipping Lines To Find String In File
Nov 26, 2013Program background: Ticket Sales Details You will sell tickets in advance and at the door. Prices for buying in advance and at the door will be given. Also, the total number of tickets sold in advance will be given. Each guest will have a unique number. If there are n tickets sold in advance, then these guests will be numbered 0 through n-1. As the event starts, requests to buy tickets at the door may be made and these guests will be numbered sequentially, starting at the lowest unassigned number. The maximum number of guests will be 1000. The first line of the file contains the following three values, separated by spaces: Cost of the presales tickets (in dollars), Cost of the tickets at the door (in dollars), and the number of presale tickets. The first two values will be positive real numbers to two decimal places and the last will be a positive integer.
The second line of the file will contain one positive integer representing the number of auction items followed by a positive real value to two decimal places (at most) representing the minimum bid increment, in dollars. The first value is guaranteed to be 1000 or less and the second will be in between 1 and 50, inclusive.
The third line of the file will contain all the prices of the auction items, in dollars, separated by spaces, in order. Thus, the first price is the price of item 0, the next price is the price of item 1, and so on. These values will be real numbers represented to up to 2 decimal places.
The fourth line of the file will contain the three following positive integers pertaining to the raffle: the number of raffle tickets available, the cost of a raffle ticket in dollars, and the number of raffle prizes. (It's strange to have raffle tickets that don't cost a whole number of dollars.)
The fifth line of the file will contain each of the values of the raffle items, in dollars, separated by spaces, in order. Thus, the first price is the price if item 0, the next price is the price of item 1, and so on. These values will be real numbers with upto 2 decimal places.
The sixth line of the file will contain ten positive integers representing the number of each of the drinks 0 through 9, in order, that are in stock.
The seventh line of the file will contain ten positive real numbers with upto 2 decimal places representing the price of each of the drinks 0 through 9, in order.
The eighth line of the file will contain a single positive integer, numEvents, representing the number of events that occur at the charity ball. These events are split into two groups: actions by guests at the ball and awards given (raffle, auction, person, totalrevenue). All of the actions precede all of the awards. You will produce exactly one line of output for each event described. Here are the formats of each event that could occur:
If a patron buys a ticket at the door, a command will be on a line by itself:
BUY TICKET k
where k is a positive integer indicating the number of tickets bought at the door. These guests will be numbered as previously mentioned. You are guaranteed that the total number of tickets bought, including presales, will not exceed 1000. This is what I have so far and I cannot figure out why it wont calculate the total revenue. I am not completely sure if it is even accessing the if statement in main.
Code:
#include <stdio.h> #include <stdlib.h>
#include <string.h>
#define N 1000
[Code].....
C++ :: Reading File Then Printing Data Onto Other File
Nov 7, 2014I am reading a file then printing the data onto the other file. It is working, however when I check to see if each variable is being properly set after reading the file a issue arises.
Example of the file being read
Code:
Vehicle PV50CAN passed camera 1 at 05:33:26.
Vehicle W867BRO passed camera 1 at 05:33:29.
Vehicle KQ63ARU passed camera 1 at 05:33:38.
Vehicle K954ITQ passed camera 1 at 05:33:40.
Vehicle V220MXB passed camera 1 at 05:33:42.
[Code] .....
C/C++ :: File I/O - Reading Values From File
Jan 28, 2014I am trying to write a program that will open a file with 2 points, take those points, determine what quadrant those points are in, and save the result back into the same file without truncating the data.
I'm having some trouble with my file I/O. I can't get my program to read the two values for X and Y that I put in the points.txt file. It simply uses whatever random number was used last time in that block of memory. In my points.txt file I put something like "4 -5" and it wont assign those numbers to my X and Y variables. I believe the issue is on line 25
#include <iostream>
#include <fstream>
using namespace std ;
int main() {
//defining X and Y
double X, Y ;
[Code] ....
C++ :: Reading From A TXT File?
Jan 5, 2014If I am reading data from a .txt file with a person's last name and first name (e.g. Miller Andrew), How do I output the same data with the first name followed by the last ?(e.g. Andrew Miller) Do I use the ignore function?
View 2 Replies View RelatedC++ :: Reading PGM File From HDD
Aug 30, 2014I want to know how to read a .pgm file from my hdd and store it in a 2d array so i can perform some action on the array later on. This is ny first time working with an imqge in c so i know nothing about it. .
View 3 Replies View Related