I have to create three arrays. my first array is going to be a 20 digit number if not less. this also goes for my second array.
#include <iostream>
const int Size = 20;
int CreateArrays (int Digit, int DigitArray[Size]);
void DisplayArrayEquation ( int Array1[Size], int Array2[Size], int ArraySum[Size]);
using namespace std;
int main(){
int Digit1, Digit2, DigitSum;
[Code] ......
I was going through a book I have about C trying to learn about arrays, and one of the first few examples of what could been done with an array was showing how to use an array to generate a list of prime numbers. I've been staring at this program for about an hour trying to understand how it works (it does), but the workings of one for loop within the program.
Code:
#include <stdio.h>
#include <stdbool.h>
int main () {
int p, i, primes[50], primeIndex = 2;
bool isPrime;
[Code]...
So that is saying in order for this loop to go on, really two conditions must be met since there's that && operator. isPrime must be true (I think that's what it means by just having "isPrime" and not setting it equal to anything) and p / primes[i] must be greater than or equal to primes[i].So at the beginning of the loop, since i = 1, p = 5 (as per surrounding loop), and prime[i] = 3 ( as per the variable assignment at the beginning of the program ), the loop condition would be "isPrime && 5 / 3 >= 3"
"5 / 3 >= 3" The loop should stop right there! 1.666666667 is NOT greater than or equal to 3!
i'm having difficulty with a problem, i need to add two big numbers suchas 54646774456776 and another one 445556777554 and it would print the result. how can i approach this problem without the use of arrays?
View 4 Replies View RelatedOk so Im suppose to make this program were the user inputs the size of the array then the user sets a certain range min and max for random numbers to be generated. I have a function named fillarray()
#include <iostream>
#include <cstdlib>
#include <ctime>
using namespace std;
int fillarray();
[Code] ....
Whenever i run the program i keep on getting a loop for the size of the array.
I have a set range, say 10 to 100, and I'm trying to separate the numbers evenly into 5 arrays. So there are 90 numbers, how can I assign 10 - 27 to the first array and the next 18 numbers to the next array without creating separate loops for each one?
View 3 Replies View RelatedI am having an error at line 21. Specifically the code where it says "list[num]=x"
How am I able to fix this code to do what I want? The purpose of my program is to enter in positive numbers in an array (and having it end when 0 is typed) My program also accepts negative values but will ignore them when it is outputted. I believe I have all the code right except for line 21.
#include<iostream>
using namespace std;
const int ARRAY_SIZE(25);
void read_list(const int list[],const int ARRAY_SIZE);
int main() {
int list[ARRAY_SIZE];
read_list(list, ARRAY_SIZE);
[Code] ....
I want to have the random numbers between 1 to 5 for a variable of 5arrays. for having the random numbers i am using the code as below.
Code:
for(int i=1;i<=5;i++)
{ int j=rand()%5;
cout<<j<<endl;
}
The problem with this way of generating random number is that i get the same set of random numbers in every outputs. Is there any other way to have different random numbers with many different outcomes as much as possible.
For my program i need to sort my int numbers [5] from highest to lowest but it seems that i made it go from lowest to highest ...
Code:
#include <iostream>
using namespace std;
int main() {
int numbers[5] = {3, -6, 10, 1, 130};
int counter1, counter2, tempNum;
//Highest to Lowest
[Code] ....
program that generates 5 non duplicate numbers that is between 1 and 20 by using arrays. Here is my code and i cant compile it.
#include <iostream>
#include <stdlib.h>
#include <time.h>
#include <iomanip>
using namespace std;
int main() {
srand(time(NULL));
[Code]...
i got 2 arrays, how would i print 10 numbers per line, so that would be 5 numbers from each array.
array1[40];
array2[40];
array1 array2// array1 array2// array1 array2 // array1 array2 // array1 array2
array1 array2// array1 array2// array1 array2 // array1 array2 // array1 array2
array1 array2// array1 array2// array1 array2 // array1 array2 // array1 array2
...... and so on
how can i put this in a loop?
and so on but there are 80 elements so i cant go one by one.
I define "Comwords" as a string, but apparently it takes the members as chars, then I can't set strings in a structure equal to the chars.
I see to also be having unknown problems with the ComMAL array and loading it values into another element of the same structure.
How to correct this? I was thinking of casting char elements as strings, but could find no reference in my library book regarding how to do that (lots on casting int's a doubles...)
Code:
int _tmain(int argc, _TCHAR* argv[]) {
int comm = 10;
int targ = 5;
int death;
struct AI_WORDS
[Code]....
Using a for loop, construct two 100 element arrays, x and y, such that element i of x stores the value sin(2*pi*i/100)) and the corresponding element of y stores cos((2*pi*i/100)). Print the values stored in the elements of x and y as you calculate them.
I have attempted to solve it but I'm not sure why the value 0 is only being printed, maybe I haven't assigned sin(2i/100)) and cos((2i/100)) to the arrays properly?
Code:
#include<stdio.h>
#include<stdlib.h>
#include<math.h>
int main () {
[Code] .....
int arr[4][5];
for (int(&row)[5] : arr){
for (int &column : row){
} }
Why do we name it row instead column?
int arr[row][column]
Wouldn't this be like
int arr[4][5];
for (int(&column)[5] : arr){
for (int &row: column){
}
It just seems funny to me because we use row[5] which should be 4 if we meant row? Or did I read it wrong in C++ prime !?
How to do the problem below using loop?
Input numbers until the user types a 0, then output the product of the non 0 numbers: e
E.g., if the user types 2 4 6 0, the program should output 48
I'm trying to write a function that takes a 32bit address and a data to store at this address.
I'm wanting to take the 32 bit memory address eg 0x12345678 and split it
into 4 x 2 bytes
12, 34, 56, 78
then each of the 4 entries is at most a 256 entry array.eg
FF, FF, FF, FF
So in this example, 0x12 points to 0x34 in the second array, which points to 0x56 in the third array, which finally points to 0x78 in the last array. This last array holds the actual data.
After successfully doing 0x12345678, say I might get a read for 0x1234AABB. So, the first and second pointers already exist, but I then have to create and write to dynamically created arrays.
The arrays need to have all entries set to NULL so that i know whether to follow the pointers to overwrite a previously entered value or create new arrays and pointers.
It all looks good and simple in the pseudo code I've written up but I'm having trouble coding it. I'm currently trying to deal with the first entry case, ie all array elements are NULL, but I'm getting confused with the pointers and creation of new arrays.
void cpu::store(unsigned int mem_add,unsigned int mem_val) {
int first = (mem_address&4278190080)>>24;
int second = (mem_address&16711680)>>16;
int third = (mem_address&65280)>>8;
int fourth= (mem_address&255);
[Code] .....
A1 has been declared as
int* A1[256] ;
User enters sentence "The Smiths have two daughters, three sons, two cats and one dog." (The numbers may change depending on what the user chooses to enter. He told us the range would be from zero to nine.) and we have to convert the written numbers within the sentence into actual decimal numbers and print out the new sentence. Ex. The Smiths have 2 daughters, 3 sons...etc.
I have written the following bit of code which reads the string and finds all the "written numbers" but I am not sure how to proceed from there. I am stuck on how to print out the new sentence with the converted numbers as my professor mentioned something about creating the new string using dynamic memory allocation.
Code:
#include <stdio.h>#include <string.h>
int main () {
char A[100];
int length = 0;
int i;
[Code] .....
Find all the prime numbers between a given pair of numbers. Numbers should be read in from an input file called "numbers.txt" and find all the prime numbers between them. Store the prime numbers in an array, then sort the array from greatest to least. Display the array before and after the sort.
I'm stuck on how to put the prime numbers into an array.
The input file has the numbers 1 & 100.
Here's what I have so far.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
ifstream fin;
fin.open("numbers.txt");
[Code] .....
Question: How to find a duplicate numbers and numbers found once in array.
View 7 Replies View RelatedI'm working on this program that I have to design a class Numbers that can be used to translate whole numbers to the English description of the number.
Now this is what I got so far:
#include <iostream>
#include <string>
using namespace std;
class Numbers {
private:
int number;
static string ones[];
static string tens[];
[Code] ....
The program seems to work. However its not giving me the right number description,
Example:
Please enter the amount you would like translated into words: 5
six dollars
please enter another number: 10
eleven dollars
please enter another number: 20
thirty dollars
please enter another number: 30
forty dollars
please enter another number: 100
two hundred dollars
please enter another number: 150
two hundred sixty dollars
please enter another number: 500
six hundred dollars
please enter another number: 1000
two thousand dollars
please enter another number:
ignoring negative numbers when I am trying to add up only positive numbers.
SAMPLE:
if (num>=0) {
sum= sum + num;
}
else
how would the else in this case being a negative number not be included in the sum
I need a list generated of all possible subset combinations for the set 1,2,3,4,5,6,7,8,9,10,12. Select six. Numbers cannot repeat.
Example subset: 1,2,3,4,5,6 (six selected, no repeats).
Example of what I dont need: 1,1,2,2,3,3,4,4,5,5,12,12 or 1,1,1,1,1,6.
I will also need the opposites removed, meaning...if I have 1,3,5,7,9,11 then I need 2,4,6,8,10,12 eliminated from the final list.
This is for a game, where you must select all numbers right or no numbers right.
The code below will generate combinations of numbers from 1 to 25 in an 15 numbers array. The only filter I've applied is that the sum of all the numbers in the vectors divided by 15 needs to be between 13 and 14.
I would like to count how many consecutive numbers there are in one combination, so that later i can apply another filter.. for example:
1 3 4 5 6 8 10 13 14 16 17 18 19 20 25
3 + 4 = 1
4 + 5 = 1
5 + 6 = 1
13 + 14 = 1
16 + 17 = 1
17 + 18 = 1
18 + 19 = 1
19 + 20 = 1
_____________
Count = 8, in this case..
I think it's not very difficult to do, but i just can't see how to do it.
#include <iostream>
#include <vector>
#include <numeric>
[Code]....
I want to make a program to print the product of even numbers between 1 and 30 and sum of odd numbers between 1 and 30. But the answer of product is negative. The photo shows the output of the code.
#include <stdio.h>
#include <conio.h>
void main ()
{
int i, even_product=1, odd_sum=0;
for(i=1;i<=30;i++) // For loop starts here!
[Code]...
So i have made an array and made a scanf in a for loop so it can store all numbers entered from keyboard in the array but i dont know how to put the numbers that are less than 5 in another array and then print that array out and the lenght of the array.
View 11 Replies View RelatedI wrote a program which sends a starting and ending range to other processes and the processes calculate the prime numbers in that range and return the count of prime numbers to the head process, process 0. But this is not working properly at the moment. I realize I still have to split up the range based on how many processes I have...I still have not figured out how I want to set that up. I
Code:
#include <stdio.h>
#include <stdlib.h>
#include <mpi.h>
int isPrime(int num);
int main(int argc, char **argv){
}
[code]....
Write a program which reads a stream of numbers from a file, and writes only the positive numbers to a second file. The user should be prompted to enter the names of both the input file and output file in main(), and then main() will open both files. Another function named process() must then be called to read all the numbers from the input file and write the positive numbers to the output file. Note that you must pass the open stream variables for each file as arguments to the process() function, and that you need to (always) double check that the files opened successfully before using them.
This is what I have so far but its not working out!
#include <iostream>
#include <fstream>
#include <stdlib.h>
using namespace std;
int process(ifstream &inf, ofstream &outf);
[Code] ....
