i have an array of strings that i need to split into 2 different string.
Code:
string title = " "Rebecca" "Alfred Hitchcock" ";
so far all the data is in one string called title
//need to break them into 2 strings, title and director
// title should contain = Rebecca
// director should contain alfred hitchcock
which string fuctions can i use to split these 2 and remove the quotes???
My homework wants me to take an input that is "x1888.88" and assign the "x" to a char, the "1" to a char, and the "888.88" to a float. How i can do this? and the "888.88" part could be any length could be a single digit or multiple with a decimal.
View 4 Replies View RelatedI have been programming a lot in Java lately which made me forget a few things in C++. So I tried doing a few simple things. I am having a hard time splitting up a mega string of 6000 names. However I did break them apart as far as their appearance in the console. But I tested it by placing it into a vector and it is still a mega string.
Code:
#include <iostream>
#include <fstream>
#include <string>
#include <vector>
class CalulateNames
[Code] ....
} I have tried using the following as well with no luck
Code:
str.replace();
str.erase();
I am hoping to finding something like in Java or the ability to handle it this way.
Code: line.split(",");
The following code shows bad memory access error (segmentation fault) when I run it. It does this right after it asks for name and the user has entered it.
#include <iostream>
#include <sstream>
using namespace std;
struct Name {
string first;
string last;
[Code] ....
I'm having trouble with this code. What I'm trying to do is to read a line from a file and cut that line into two pieces, one is the keyword and the other is the definition. I want to read up to when there is a dash and assign that line to key and then assign the rest of the line to def. After that I copy key to the struct DictEntries.key and def to DictEntries.def. The output of this shows only the definition for both DictEntries.key and DictEntries.def but if I use "puts(key);" I see the keyword.
Code:
while(!feof(dictionary))
{
char line[200];
char *key,*def;
fgets(line,sizeof(line),dictionary);
key = strtok(line,"-");
}
[code]....
With respect to below string, i need to split it and store the values accordingly as below,
P2P-DEVICE-FOUND fa:7b:7a:42:02:13 p2p_dev_addr=fa:7b:7a:42:02:13
pri_dev_type=1-0050F204-1 name='p2p-TEST1' config_methods=0x188 dev_capab=0x27 group_capab=0x0 wfd_dev_info=000006015d022a0032
dev_addr = fa:7b:7a:42:02:13
dev_type = 1-0050F204-1
dev_name = p2p-TEST1
config_method = 0x188
dev_capab = 0x27
group_capab = 0x0
dev_info = 000006015d022a0032
How to split it as above and store. I am new to c++
I have the following string array
string[] output= input.toArray();
each index has a set of two characters, for example:
output[0] has 'th', output[1] has 'is'
I want to take t and h and compare them or do anything with them, but it must be in pairs.
I tried foreach but I don't know if there is a way to compare the element with the next element .
I have a string like "THIS::IS::THE:EXAMPLE::STRING"
I want to split the string to tokens based on "::".
The tokens should be:
THIS
IS
THE:EXAMPLE
EXAMPLE
STRING
I have been looking everywhere, but the only place I have seen it done is Objective C. The Question: how do I split a string, input by the user, into an array of characters? No code shown because I know no commands that do this.
--Input by user as in fgets, or scanf().
I'm writing a code generator that produces a function from the strings to the ints. I'll be using the generated code as a "from string to enum" utility. For example:
Code: enum Color {
Red, Green, Blue, Banana
};
// The definition of colorFromString is generated somewhere.
Color colorFromString(const std::string & s);
[Code].....
The implementation of the generated code is a trie. I've seen implementations in the past (including the one at work that I'd like to replace).
Anyway, say you need to compare the region of the string
Code: const char s[] = "holiday"; from index 3 until before index 6 against the string "ida".
I can see two bits of code that my generator could produce. One is
Code: bool hasIda = std::equal(s + 3, s + 6, "ida"); and the other is
Code: bool hasIda = s[3] == 'i' && s[4] == 'd' && s[5] == 'a';
The existing code generator uses the latter method, claiming (I think) that the generated instructions are more efficient on some architectures. Is there any way to determine which is better generally, or do I have to examine the assembly produced on all target platforms?
Is this possible in c++:
Code:
string s = R"(some rand string)" + argv[4] + R"(some rand string1)";
if it isn't, what is the best way to do this?
I am trying to compare a string that i have entered with a set of strings that have already been stored in a file. I am using strcmp function but i am not getting the result.
Code:
printf("
Enter string:");
scanf("%s",&m);
ptr_file =fopen("abc.text","r");
[Code] .....
I'm very very new to maps and am really just trying to hash them out by myself.
If you're mapping strings to integers:
map <string, int> myMap;
myMap[ "zero" ] = 0;
myMap[ "one" ] = 1;
How do I print the string "zero", for instance, from myMap?
cout << myMap.at(0) << endl;
doesn't work. Nor does:
cout << static_cast<string>( myMap.at(0) ) << endl;
I need access to the string using the int and the int using the string. Or just direct access to one or the other. . . It's just confusing that they're technically mapped to one another but I can't really access either of them.
I am IT student and had a C++/C (oral + paper) exam today. One of the tasks was to write a 2D-Matrix (as the question said) class with following restrictions:
- No <string> header is allowed
- Only Dtor needs to be implemented
- No templates
- Following should be possible:
Code:
std::cout << mat1 + mat2 + "some randome string";
mat1 += mat2; So i did the following:
In Matrix.h i wrote: Code: Class Matrix{
int rows, cols;
char *arr[][];
[Code] .....
Now..this destructor made me loose some points since the Prof. said that it is not correct. The corrected version was:
Code:
Matrix::~Matrix(){
if(arr){
for(int i = 0; i < rows; i++){
for(int j = 0; j < cols; j++){
delete [] arr[i][j];
[Code] ....
Now, i agree on that error i made, but it is only in case we use the "new" keyword to reserve place dynamically for each string(for each char*). So this raised the question in my head about:
Since the following is allowed in C++
Code:
char* str1 = "hello";
char* str2 = "you";
arr[1][3] = str1;//arr[1][3] was initialized to "_" without new keyword
arr[6][0] = str2;//arr[6][0] was initialized to "_" without new keyword why would someone use the new keyword..
I mean like this:
Code:
arr[1][3] = new char*[sizeof("sometext1")+1];
arr[1][3] = "sometext1";
arr[6][0] = new char*[sizeof("sometext2")+1];
arr[6][0] = "sometextw";
What is happening internally in C++ in both the cases(with and without new keyword)?
I want to make a string array from strings in a text file. Itry to do this but i couldn't do, where is my mistake?
Code:
#include <stdio.h>
#include <stdlib.h>
int main(){
char cumle[100],*c,*dene[50];
FILE *input;
input=fopen("input.txt","r");
[Code]...
how do I tell the if statement to output this error message 'exceeded the maximum amount of characters' that has its characters stored in an array using c-style string?
[INPUT] The cat caught the mouse!
[OUTPUT] Exceeded the maximum amount of characters (max 10)
#include<iostream>
#include<string>
[Code]....
I have the following function I would like to convert to work with std:string. I don't understand QT strings at all.
Code:
void FromHexString(const QString &hexText, void* pData, int dataSize) {
for (int i = 0; i < hexText.length(); ++i) {
bool ok = false;
((uint8_t*)pData)[ i ] = hexText.mid( 2*i, 2 ).toInt( &ok, 16 );
}
}
I have a firmware application that works well where I display simple text messages on an LCD screen. At the moment, the User Interface is only in English and I have the text strings simply declared as follows:
Code:
static char msg1[] = " Welcome ";
static char msg2[] = " Data Read ";
//etc...
I want to add a variable that can set the language dynamically from an external device, and so I thought I could do the following:
Code:
#define ENG 0
#define FRE 1
#define GER 2
//...
static char msg1[ENG][] = " Welcome ";
static char msg2[ENG][] = " Data Read ";
[Code] .....
writeLCD(msg1[cLang][]); When I try to compile the above I get a compiler error at the "static char msg..." declarations. The error is: "error: array type has incomplete element type"
Is this method valid, but I have a simple syntax problem with the arrray declarations? Or is this method unworkable and I should find a different method?
My assignment is : Please use C type strings ( array representation of strings). Write a program that will ask the user to enter a string. It will then regard that string as a worked-on string and allow the user to perform the following editing functions on it:
s – search
i – insert
a – append
d – delete
a – append
d – delete
r – replace
e – exit
s – search
This option will allow the user to search for a specified string in the worked-on string. If the string is
found, it will display the starting index (position) of the searched string in the worked-on string.
here is what i have so far.
#include <iostream>
#include <cstring>
using namespace std;
int main() {
char a_string[80];
[Code] .....
What is the simpliest way to split 2D array - for example - Split 9x9 2D array to - 3x3 2D arrays (squares).
View 5 Replies View RelatedMy code
#include<iostream>
#include<string>
using namespace std;
string strip(string message) { //removing elements that is not A-Z or a-z
string stripped;
for(int x = 0; x < message.length(); x++) {
[code]....
The output in my code shows like this:
[e]Encipher
[d]decipher
[x] Exit
Enter choice: e
Enter message to Encrypted:
i love you
Enter Key:
love
The encrypted message is: tzjzpmjy
Back to main menu? (y/n):
However , I want the output to display the spaces as the user's input.
ex. The encrypted message is: t zjzp mjy.
This is the same as i love you in the user's input.
I'm trying to develop a program that stores a list of hw assignments in the form of "Date,Assignment name,grade". I have functions that add,remove, and delete from a list, but I would also like to search and delete a particular date found in the list. From here, split - Splitting a string in C++ - Stack Overflow I've tested Evan Teran's method to split a string, but I'm unsure of how to implement it in my code.
List.h Code: #ifndef LIST_H
#define LIST_H
#include <string>
using namespace std;
class List{
[Code] .....
I have the following dynamically allocated 2D array:
Code:
int num_rows = 100;
int num_cols = 3;
double **myArray= (double**)malloc( sizeof(double *) * num_rows);
for(i = 0; i < num_rows; i++) {
myArray[i] = (double*)malloc( sizeof(double) * num_cols);
}
After sorting the array based on the values in column 1,:
Code:
qsort(myArray, num_rows, sizeof(myArray[0]), comp_function);
int comp_function(const void* a, const void* b) {
double **p1 = (double**)a;
double **p2 = (double**)b;
double *arr1 = *p1;
double *arr2 = *p2;
return arr1[0] - arr2[0];
}
I need to split the array into two halves so that I can pass each separately into another function that accepts a type double ** pointer. What is the most efficient way of splitting the array? Is it possible to keep the original double ** pointer for the first half of the array and then assign a new double ** pointer to the second half of the array?
im new to programming and new to C, just started with arrays and im somewhat stucked, where i have a .txt file which contains items and prices. I want the items and the prices split into 2 different arrays
The .txt looks like that:
orange 0.89
banana 0.79
apple 0.59
I now want to split the items in a char items[100][100] and float prices[100]. how to split this, preferably with fscanf ?
I have an assignment where we have to input this sample code and get the following results:
./lab3
Please enter the vectors here:
1 2 3 4 2 s
You are not giving even number of inputs!
./lab3
Please enter the vectors here:
1 2 3 2 4 4 s
The sample values are:
1 2 3
The frequencies are:
2 4 4
The discrete probability distribution is:
0.2 0.4 0.4
The mean is 2.2.
The variance is 0.56.
-----------
I got the part with the mean, variance , and probability distribution but i cannot split up user input into vectors for sample values and frequencies.
"1 2 3" are suppose to become sample values and "2 4 4" are suppose to become the frequencies.
------------
------------
I also wanted to know how to properly make the code so if there is an odd number of inputs the code outputs "You are not giving even number of inputs!". But if is an even number of inputs the code runs. To do this I have:
int main(int argc, char** argv){
float input = 1.0;
cout<<"Please enter vectors here:"
cin>>input;
[Code] ....
C++ program to accept a value and split it digit by digit and display in name
E.g.: 123
>one two three