How to create text file in C programming. And after some changing in that text file off the running code of C, I want to read that modified text file back in C running code. e.g
Created file may have number 1, after changing this value to 2 let say, than I want to read that 2 value which is in text file.
how to do this in C#. Need to connect to Oracle db, take a file from directory then read every line of the file. Lines are like this:
123234847656|8800359898818177|A|20130401 14:51:42|
123234847212||D|20130401 14:52:08|
123234847212||M|20130401 14:55:38|
Then will split as string on every '|' char and according to this flag |A|, |D| or |M| I will add/delete/modify information inside. I have trouble with this part with the connection and read/split file and check for the flag A, D or M.
I am trying to get text file and read only first 100 lines of the text content using c/c++. how can i do it?
is it something like string line;
getline(stream,line);
??
I have had experience in programming from python (slightly related, html/css) and the computercraft from minecraff (basic i think it is).
My question is mainly about the C and past experience with the computercraft.
1. Is it possible to split the command console into 2 parts (a visual area and a text area)
2. Is it possible to use any form of pixel art or custom characters within any command console using C.
The Objective Of This Program Is To Create A File To Write Text And Read Back The File Content. To Do That I Have Made Two Function writeFile() To Write And readFile() To Read.The readFile() function works just fine but writeFile() doesn't.
How writeFile() function Works? when writeFile() function Execute It Takes Characters User Type And When Hit Enter(ASC|| 10) It Ask "More?(Y/N)" That Means What User Want? Want To Go Next Line Or End Input?
If "Y" Than Inputs Are Taken From Next Line Else Input Ends.
But The Problem Is When Program Encounters ch==10 It Shows "More?(Y/N)" And Takes Input In cmd variable.If cmd=='Y' I Mean More From Next Line Than It Should Execute Scanf Again To Take ch I Mean User Input.But Its Not!!! Its Always Showing "More?(Y/N)" Again And Again Like A Loop.
Code:
#include <stdio.h>
void writeFile(void);
void readFile(void);
int main(){
[Code].....
I am writing a simple file/text parser to read a config file for some code I am working on. It's dead simple and not particularly smart but it should get the job done. The code reads a config file:
Code:
readlength=2500000
start=0
finish=25000000
cutoff=20000
samplingfreq=250000
poles=10
filterpadding=500
}
[code]....
Here is where it gets wierd. You'll notice that there is an unused variable (filepath) in the config struct. This variable is not referenced or used anywhere in the code, ever. Yet if I comment out the declaration of char filepath[1024], the code segfaults partway through the read_config() function.
My best guess is that there is a buffer overflow elsewhere and it just so happens that the memory allocated for filepath happened to be there to catch it up until now, but I can't work out where it might be happening. With the declaration commented out, the read_config() function gets as far as reading the "padding" variable before it crashes. Yet when the declaration is there, then all the variabled are read correctly and everything seems to work.
I have a .txt file which I want to read from and then write a new text file, this time with sorted lines. It is easy to sort one value, but what about sorting entire lines based on one value?
I want to sort the lines based on the FIRST value.
Example text file contents:
values;data
5.01 100
2.9 342
2.69 43534
10.1 43
6.8 45324
Output: Text file containing
2.69 43534
2.9 342
5.01 100
6.8 45324
10.1 43
It's easy to do this if there was only 1 number on each line, but I do I sort all the lines based on the first number in each line?
My text file is in the correct folder and the name of my text file is the same as the code. I dont get no errors i dont see why i cant get my text to be read.
my code.
#include "stdafx.h"
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
void main();
int menu();
double currentBalance(double balance);
[Code] ....
I'm a beginner at programming and I'm not sure how to read in information from a text file. What I want to do is take a text file which contains around 20 rows and 3 columns of numbers, and put these into an array which can then be used for performing calculations. How do I do this? Would I need to declare the size of the array beforehand? When accessing my file, do I include the full address?
The relevant part is lines 29-33:
Code:
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
/* this is a simpllified code using BEM equations */
main()
[Code] ....
how to read and display the content of a text file in my console application using C++. The file contains 25 lines and 3 columns. The first column is "Rank" (numerical values from 1 to 25) the second column is "Name" (25 teams name) and the third column "value" has the amount of point each team is worth. Looking for code for reading and displaying all this information ....
View 4 Replies View RelatedI am making a script to read the latest from a text file. It picks up the line by numbytes in fseek, but the data line may vary and numbytes not be accurate, how can I fix this?
And another problem is that the line has, date, time, value, separated by space, how to read that line and put these 3 information in variable?
#include <stdio.h>
#include <conio.h>
int main() {
FILE *arq;
char Line[100];
char *result;
int tam, i;
// Opens a file for READING TEXT
arq = fopen("temp.txt", "rt");
[code].....
I'm trying to make a program that will read in names and grades from a text file and print them in the console. However whenever I try to use the OpenFile.get function I get an error saying that there is "no instance of overloaded function"
getting this error resolved before I can.
my code so far (I know it's missing a lot, but that's not what I'm worried about right now.)
#include <fstream>
#include <iostream>
#include <string>
[Code]....
How can I read text from a webpage asynchronously,from within C++. After you first connect to the internet using usual means, you enter the string
e.g. "[URL] ...." and the C++ program reads the information: "<title>BBC Website</title><body>This is the BBC website...." from the internet.
Here I want to connect to website every 60 minutes and fetch only first 100 lines of the run.txt file as mentioned above. How can I do this using C++ and asynchronous winsock ???
Code:
#define WIN_OS
#define _DEBUG_PRINT(X) /* X */
//For commn
#include <iostream>
#include <string>
#include <stdlib.h>
#include <assert.h>
[Code] .....
I have been given an assignment that has to do with permutations. I am suppose to read a text file that contains the permutation rules and the text to be "permutated", and then output the rules and the new text into an output file.
So far, I've gotten this:
Code:
# include <stdio.h>
void printArray(FILE* file, char* array, int maxSize)
{
int i;
for (i = 0; i<maxSize; i++)
fprintf(file, "%c", *(array + i));
[Code] ....
Here is what the input file looks like:
Code:
0 1 2 3 4 5 6 7 8 9
4 5 6 0 9 7 8 1 2 3
Moderation in temper, is always a virtue; but moderation in principle, is a species of vice.
Here is what the output file is suppose to look like:
Code:
0 1 2 3 4 5 6 7 8 9
4 5 6 0 9 7 8 1 2 3
ratMnioodetem rpein al,ywa isvirsetu a t m;eod
buon r inaticipp,lerina s cpeis of icvies - Temho.
-ainaPes
The first two lines are the permutation rules. Currently I have figured out how to read the file into an array and then print it back out into a text.
What I want to do is figure out how to read only the first two line of the input file and store that as a permutation rules, and then continue reading the rest of the input file and store that separately as the text to be "permutated". And then eventually figure out how to apply the permutation to the text.
The code reads a text file delimited by colons : and formatted as follows
1111:2222:3333
How would I store the values separated by colons : into separate variables ?
Code:
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <string.h>
int read_file();
[Code] ....
In a program, I have a text file (called MyDictionary.txt) which has thousands of words in alphabetical order. I need to make a C program that reads in this text file and then makes an array called char Words[# of total words in the text file][length of longest word].
Aarhus
Aaron
Ababa
aback
abaft
abandon
i have prepared a code the read from txt file with values such integers and strings. but the code i have prepared reads only 1 line. how can i make the code to read multiple records from txt file.
input records example in txt file:
9009 James 90
Code:
#include<stdio.h>
#include<conio.h>
#include<stdlib.h>
void main()
{
int c;
struct student{
}
[code]....
I'm making a Jeopardy game and when I read text from a file into arrays to set the categories, questions and answers a couple of the strings are not terminating and they are printing that junk box thing at the end.
When I use the debugger and print the problem strings they are showing up as "Thanksgiving21" or "Calvin Klein21" but all the other strings aren't having that problem.
Then for example I will change "line[strlen(line)-1] = '';" to "line[strlen(line)] = '';" and other strings will have that problem but not those stated ones. I'm using line[strlen(line) - 1] = '' to get rid of the newline fgets appends on the end of the strings.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main(int argc, char *argv[]){
FILE *file = fopen("questions", "r");
char *string[66], line[150];
int idx;
[Code]...
I have to write a function that reads letters one at a time from a text file, such as (aBCdefG) using fgetc(). However, each character needs to be inserted into the array in ascending ASCII order, so it should come out as (BCGadef). I wanted to use an insertion sort, however, that would require me to pass the whole array. My professor wants me to sort the letters as they are read, though, and not as a whole array.Can you even do that?
View 11 Replies View RelatedPerhaps my original wording on this was confusing so I will ask a different way.
if I have a text file called
data.txt
and it has the following in it.
12345
67890
12345
67890
how would i read this information into an array called
int data[4][5]
This is in C.
I have the following code. Everything compiles but when it runs the sums are not correct. I need to calculate the sums for all the odd integers, the even integers, and all the integers.
my infile was provided with the following integers. I am not supposed to assume the infile has 20 integers.
Also, I wanted to the average to calculate with two decimal place precision and that is also incorrect??? setprecision(2) I thought would work???
#include <cstdlib>
#include <iostream>
#include <fstream>
[Code]......
I'm trying to read all content from a text file into a string. This is the code I'm using for it (I know there are other, maybe better ways to do it but I'd like to stick to this for now):
char* buffer;
std::string data;
FILE* fp = fopen("textfile.txt", "rb");
if (!fp) {
printf("Can't open file");
[Code] ....
So my problem is that I get an exception when I try to free the memory -> 0xC0000005: Access violation reading location 0x51366199
I even get the exception when I try to free it immediately after calloc() but why this is.
And if I use buffer = (char*)malloc(lSize); I don't get any exceptions.
So, why this fails and what I'm doing wrong.
I'm having trouble in getting my program to read from a file and put all the proper data into its proper class variables. I have a class (called Champion) that has string variable for a name and a vector of strings for items. I also have a vector of Champion that holds multiple champions. Here's my code:
Champion.hpp
#ifndef CHAMPION_HPP_INCLUDED
#define CHAMPION_HPP_INCLUDED
#include <iostream>
[Code].....
I want to write a c++ code, which will read in a file like this:
A: 10
B: 20
C: 30
while in the code, I would need the value of A B C, how can I let the cin ignore the labels like A:?
of course, I can write a file as
10
20
30
.
.
.
and use cin>>A>>B>>C; to read in those
but in this way, when the number of values increase, it is really hard to remember who is who?
I have looked through te tutorials here, and even google it, as well as tried to follow the power points from my class..but I still can't seem to figure out how to make this code work correctly.. Basically I have to create a file called grade and write to it a student name and their grade score, and then read from the file all students names and there grade and display this on the screen as well as calculate the grade average for all of the students and display it.
Well I am able to write to the text file, but I can't seem to get the rest to work. I can't figure out how to read from the text file..Here is my code below.
write a sample code that does something similar write to text file string and numbers and then reads from it.
#include <iostream>
#include <fstream>
using namespace std;
[Code].....
private void open(object sender, EventArgs e) {
OpenFileDialog openDialog = new OpenFileDialog();
if (openDialog.ShowDialog() == DialogResult.OK) {
string[] lines = File.ReadAllLines(openDialog.FileName);
int k = 0;
while (k < lines.Length)
[Code] ....
So in this code, the user basically opens a text file from the dialog. Then the file gets read on all the lines and gets stored in an array. Now the reason I did this is because there are more fields of text boxes I have to fill in after I fill in the table (6x3). I'm getting an out of bounds error however.
19
19
19
0
95
0
0
0
0
5
0
0
5
1
0
0
51
1
110
Warrior
This is a sample text file that is being used. As you can see all the lines from start up until (excluding "110") will be used in the table. Now I want to read the last lines in this text file and put it in another text box. How do I do that?
