I need to write a program that will give me multiple calculation results.
#include <iostream>
using namespace std;
int main () {
int x = 8;
int y = 7;
[Code] ....
It only calculates the last two numbers: 1 and 0, so therefor it gives me 1.
But i need to calculate x and y each time they are smaller(incremented) by one digit.
Please note that the int calculation formula needs to stay.
I had to write a simple program that prompted the user for various test scores and it would pump out his grade average at the end. I did that with no issue, however, my instructor wants me to add something to the end off the code and I'm not sure how to do that. My code is:
#include <iostream>
#include <iomanip>
using namespace std;
int main() {
string tempType;
float SumTest, MaxTest, TestAve,ProgAve,output;
[Code] ....
And this is what I'm supposed to add, the averages are supposed to have numbers from what the user gave.
***************************
Grade Calculator
Program Average
Test Average
Final Grade
***************************
i have only recently got into programming. i have this homework assignment that is frying my brains, the program needs to take a number from the user and give the 'reduced' sum. for example: if the user enters 888 then the sum should be: 6. it takes the number and adds its digits im just looking for a direction to where my problem is
#include "iostream.h"
int reduction (int number) {
return number/10+number%10;
}
int main() {
int number,loopcount;
cout<< "please enter a number"<<endl;
cin>>number;
[Code]...
I am basically trying to make a program for a calculator. I am struggling with how to do the sine calculation. this calculation will take place at line 158.
#include <iostream>
#include <cmath>
using namespace std;
int main() {
double firstNumber = 0.0;
double secondNumber = 0.0;
char operation =' ';
[Code] ....
I'm working on a payroll program and I'm having problems that are causing calculation errors.
My input file is
1234FredJones4025.00
2345 TerrySmith6010.00
The errors I get are from the regular pay, over time pay, gross pay, tax amount and net pay calculations. They all look similar to this (6e+002). I believe they are occurring because regular pay isn't calculating correctly and the rest depend on that for their calculations. However, I can't see why regular pay isn't calculating correctly.
#include <fstream>
#include <iostream>
#include <iomanip>
using namespace std;
class payroll{
ifstream fin;
char employeeid[100];
[Code] .....
I'm using MSVC++ and it builds sucessfully but somewhere something is obviously messed it. Once i try to debug it just shows weird numbers.
int k=0; //could this be the problem??? since 0 would be over writing any given value. but if i leave int k; it showsa warning and MSVC would count that as an error
#include "stdafx.h" //Header file section
#include <iostream>
#include <iomanip>
#include <string>
using namespace std;
//structure declaration
struct menuitemtype
[Code] ......
I was doing problem 10 on project euler Project Euler. The following code produces two different answers on different systems:
Code:
#define INPUT 2000000
Bool isPrime(const int number) {
int i, sqr = sqrt(n);
if(n%2==0) return 0;
for(i=3;i<=sqr; i+=2)
[Code] .....
Computer A:
Linux 3.0.0-30-generic #47-Ubuntu SMP Wed Jan 2 22:39:01 UTC 2013 i686 i686 i386 GNU/Linux
gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
Ubuntu 11.10
Computer B:
Linux 3.2.0-31-virtual #50-Ubuntu SMP Fri Sep 7 16:36:36 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
Ubuntu 12.04
Compiled by: gcc program.c -o run -lm
Computer A generates this answer: 1179908154 (wrong)
Computer B generates this answer: 142913828922 (right)
My guess might be because they are running on different architectures. But I really don't know.
The instructions: A nutritionist who works for a fitness club facilitate members by evaluating their diets.As part of her evaluation, she asks members for the number of fat grams and carbohydrate grams that they consume in a day. Then, she calculates the number of calories that results from the fat using the following formula:
Calories from fat = fat grams x 9
Next, she calculates the number of calories that result from the carbohydrates using the following formula:
Calories from Carbs = Carbs grams x 4
Create an application that will make these calculations
-DO NOT use global variables
-Create two variables in main that will hold the two results
-Pass fat and carbs by value, and the result variables by reference
-Output in main
The key with what you need to pass is this: Pass fat and carbs by value, and the result variables by reference. This is what I have to far but I don't understand how to "pass by value, and results by variable" ....
#include <iostream>
using namespace std;
void grams (int);
void calories ();
int main () {
//Get fat and carb grams
[Code] ....
I am reading from a text file and want to create a program that will perform the same calculation for every oscillation.
The text file I'm reading from is attached to this post. A3.txt
The program that I've written is as follows:
Code:
#include <iostream>
#include <fstream>
using namespace std;
int main() {
ifstream inFile ("AP1.txt");
ofstream results_file ("APDuration.txt");
[Code]...
Where I'm having trouble is in having the inFile.seekg function iterate to the next series of values.
Here is what the data file looks like in a graph:
In a nutshell, my program will read the duration of each action potential from a point called "dVmax" (where the upstroke is at its maximum upward rate of change) to the point of 90% repolarization (on the downstroke where 90% of the total wave amplitude is subtracted from the volts at peak amplitude).
If you would like to test my program on one action potential, here is one action potential : AP1.txt
5. Four experiments are performed and each experiment produces four test results. The results are tabulated as shown below. Write a program to store these results in a two-dimensional array, A[4][5], then use a nested for-loop to compute the average of the test results for each experiment and store it in the 5th column of the array. Print the array.
1st experiment results: | 23.2 | 34.8 | 53.7 | 19.5 |
2nd experiment results: | 34.8 | 42.9 | 28.6 | 35.4 |
3rd experiment results: | 24.5 | 29.5 | 32.0 | 19.3 |
4th experiment results: | 36.8 | 31.6 | 43.7 | 29.5 |
6. Using the srand( ) and rand ( ) C++ library functions, fill an array of 1000 numbers with random numbers that have been scaled to the range of 1 to 100 inclusive. Then determine and display the number of random numbers having bvalues between 1 and 50 and the number having values greater than 50. What do you expect the output counts to be?
I need to write a program that merges the numbers in two files and writes the results to a third file. The program reads input from two different files and writes the output to a third file. Each input file contains a list of integers in ascending order. After the program is executed, the output file contains the numbers from the two input files in one longer list, also in ascending order. Your program should define a function with three arguments: one for each of the two input file streams and one for the output file stream. The input files should be named numbers1.txt and numbers2.txt, and the output file should be named output.txt.
View 1 Replies View RelatedI am trying to code and compile a program that requests a uses to first inpu the number of sides they wish for a dice to have and secondly input the number of dice throws they would like to calculate the value for. The program will print an error message and default the number of sides the dice has to 5 if the number entered is below 4. Finally it will print out a percentage figure for each value that results from all the the dice rolls.
I have attached my header, driver and class files below along with accompanying error messages below them
// file name Exercise.cpp
#include <iostream>
#include "Die.h"
using namespace std;
int main() // the main program begins here
{
char restart = 'y'; // declare variables
double numRolls = 0.0;
int diceTot = 0;
[Code] .....
I am getting an error on lines 31 and 36 about an expected identifier on my program that computes area and circumference. Is something wrong with my external functions outside of main?
Code:
#include <stdio.h>
#define PI 3.14159
double area;
double circum;
double find_circum (double radius);
double find_area (double radius);
[Code] ....
i am trying to create a program for multiple windows. Here is my code
#include<Windows.h>
// Store handles to the main window and application instance globally.
HWND ghFirstWnd =0;
HWND ghSecondWnd=0;
HWND ghThirdWnd=0;
HINSTANCE ghAppInst=0;
[Code]...
problem is when i try to execute the code it just say create window1- failed!!
We have been assigned to create a program that uses multiple functions. The professor has given us code for two of the functions, one to open a file and then another one to read the files contents and output them. I have put these into my program but they will not execute. The program does run, but the functions themselves are not executing. I have practiced with other functions that contain no parameters and those run fine, but the functions she gave us have multiple parameters.
The code I have so far is below:
#include <iostream>
#include <iomanip>
#include <fstream>
#include <string>
void PrintFile (string FileName, ifstream& inFile);
int main () {
ifstream inFile;
string fileName;
[Code] .....
I'm writing a Blackjack program where the user can choose to Hit(H) or Stand (S). I would like them to be able to use upper or lower case letter for this. My code doesn't seem to work right for my Stands.
Code:
char choice;
do {
choice = 0;
while (choice < 1) {
printf("
[Code] ....
I want to know how to read multiple text files in this program... I have 5 text files(order1,order2,...order5).
#include<iostream.h>
#include<fstream.h>
#include<conio.h>
#include<windows.h>
using namespace std;
class{
[Code] ....
I already wrote a program that will calculate the gross pay for a set of employees.
I want modify the code by adding multiple functions.
I want to create a separate function whenever possible to break up the program.
For example, I would like have a function for obtaining the hours from the user, another function for calculating overtime hours, another for calculating gross pay and another function for producing the output.
#include <stdio.h>
#include <stdlib.h>
#define STD_HOURS 40.0
#define OT hour>STD_HOURS
#define SIZE 5
int main() {
int clockNumber[SIZE] = {98401, 526488, 765349, 34645, 127615}; /* employee ID */
[code]....
I want to make a custom program for packaging multiple files in one. Not as complicated as ZLIB or others. Consider few files, XML, txt, JPG, OGG, I want them to be added in 1 file. Not visible not readable. Just a datafile. I have some ideas about creating some kind of indexing of the start byte, end byte of each file. But I am still way too far. Can you point me some direction at what should I stress in creating this software. It will be portable since I am planning to use stdlib, stdio only, maybe and string to recreate the filenames from the large chunk datafile.
View 2 Replies View RelatedI am returning area from areaCircle(), but do not know how to print it in main. I know this program has lots of errors, two cases that I have listed.
Not sure how to properly list multiple function calls in a switch statement, and how to print one's return from main.
int main() {
char choice;
double area;
showMenu(choice);
switch (choice) // If input is C, use getRadius, areaCircle and count, then print the are
{
case 'C': void getRadius(),double areaCircle(), void count(bool display = false);
[Code]...
How difficult would it be to program a hash-map system where each "key" can have multiple values under indexes?
For example: "Word" -> 45(index 0) , 67(index 1) , 12(index 2). What could I start with to program this or where could I find a pre-made system that does this?
I'm saving the images in folder by using:
webClient.DownloadFile(href, sourcepath);
I don't want to give name as Current date and time..shown in given below code
string sub = @"Gadhada";
DirectoryInfo subFolder = dir1.CreateSubdirectory(sub);
Imagename = DateTime.Now.Year.ToString() + DateTime.Now.Month.ToString() +
[Code].....
I want to save my imagename as 1.jpg, 2.jpg, 3.jpg.
If i have character string 'char name[30]' how to give validation for the name entered by user?
View 4 Replies View RelatedI am designing a form ..in wich i used 3 buttons...from these 3 butons ,i wanna give backcolor to button1 . How to give it a backcolor?
View 1 Replies View Related#define PROJECT_ID ram
#define QUOTES(FILENAME) #FILENAME
#define DATA_VAR_FILENAME(PROJECT_ID) QUOTES(../##PROJECT_ID##_data_var.h)
#define DATA_VAR_FILE(PROJECT_ID) DATA_VAR_FILENAME(PROJECT_ID)
#define CUST_DATA_VAR_FILENAME DATA_VAR_FILE(PROJECT_ID)
When I tried to include CUST_DATA_VAR_FILENAME like below
#include CUST_DATA_VAR_FILENAME
Will get below error
error: pasting "/" and "ram" does not give a valid preprocessing token
Is there any methods to add scroll bar for group box
My code scenerio is: I have many groupbox in form, all group box will be appears in same place and also height and width is fixed. I'm doing group box visible true/false according to condition.
So some groupbox ecxeeds the width and heighto so I want to put this all in scroll Bar
