C++ :: Printing A String To A File?
Aug 24, 2013
these are the errors that I'm getting from an online c++ compiler
// main.cpp:4:10: error: #include expects "FILENAME" or
// main.cpp: In function 'void permute(char*, int)':
// main.cpp:17:9: error: 'f' was not declared in this scope
I don't understand how to print full_string to a file!// otherwise, I know that it gives the correct output -- 90 strings.
#include <string>
#include <iostream>
#include <fstream>
#include >ios> // line 4 error
using namespace std;
char full_string[] = "112233";
[code]....
//iter_swap – it just swaps the elements pointed to by the respective pointers without changing the pointers themselves. so, it's basically equivalent to the function:
void iter_swap(char *ptr1, char *ptr2) {
char tmp = *ptr1; *ptr1 = *ptr2;
*ptr2 = tmp;
}
// min_element – finds the location of the minimum element that exists in the given range. in this case,
it is the char* pointer pointing to the location of that element. it can be implemented like:
char *min_element(char *start, char *end) {
// end is 1 beyond the last valid element
if(start == end) return end; // empty range
char *min_pos = start;
for(char *iter = start+1; iter != end; ++iter)
[code]....
View 7 Replies
ADVERTISEMENT
Dec 26, 2013
Code:
#include <iostream>
#include <string>
using namespace std;
int main() {
string s="Last Assignment/n";
cout<<j[1]<<j[2]<<j[3];
I don't understand how it printing each element of whole string. Like L a s. But I did not declared array.
View 2 Replies
View Related
May 24, 2014
I'm having trouble printing the text in between separators like commas, periods, and at signs. I'm following Jumping into C++ Chapter 19 Practice Problem 2.
This is what I have so far:
Code:
#include <iostream>#include <string>
usingnamespacestd;
int findNeedle (char separator, string inputLine) {
int needleAppearences = 0;
[Code] ....
And this was my test run output:
Enter the contact info. one, two, three, ,? , one two, th three, Program ended with exit code: 0
View 4 Replies
View Related
Jan 25, 2013
Code:
#include<stdio.h>
#include<string.h>
#define a 15
[Code]....
I am trying to print all combinations of a string but I couldn't figure out how to do loop for it. Code works only 2-3-4 letters words
View 4 Replies
View Related
Jan 3, 2015
I am trying to save 5 persons names to a struct, and then printing them afterwards, shortly before the program ends. I tried to print the char string out right after it has been copied over, and it showed fine, but when i try to write it out right at the end of the program (its in a separate function) the terminal just prints gibberish.
the function looks like this:
Code:
int printUser(){
printf("Following patients have been recorded in this session:
");
struct database patient1;
struct database patient2;
struct database patient3;
[Code]...
the output looks like this(as you can se in under structest, that it shows the correct string, it also uses printf):
View 7 Replies
View Related
May 27, 2014
So I have an array of char called s.This array has many words inside, each one separated by ''.The words are sorted by length (from bigger to smaller).I have have a char matrix with random things inside (it was not initialized) caled mat.I want to copy the first word from the array s to the matrix mat.
Code:
int nlin, ncol; /*number of lines and collumns.*/
int c,l,a,q;
char mat [1000][1000];
char s[1000];
}
[code]....
I can't see where this is wrong, but, when i test it, it clearly is not right. for example, if the input is 3 lines and 3 columns for the matrix and the word is crate, the output is :
cra
t
e
but it should be:
cra
t
e
View 11 Replies
View Related
Feb 17, 2013
I am trying to write a program for printing all the combinations of a string. Why this program is giving the error message.
"First-chance exception at 0x761bc41f in word.exe: Microsoft C++ exception: std::out_of_range at memory location 0x0026f6b4..
Unhandled exception at 0x761bc41f in word.exe: Microsoft C++ exception: std::out_of_range at memory location 0x0026f6b4.." when i try to run this in MVS 2010
#include<iostream>
#include <stdio.h>
#include <string>
#include <stdlib.h>
#include<conio.h>
void combination(std::string input,int length,std::string buffer,int allowedno)
[Code] .....
View 1 Replies
View Related
May 14, 2014
How to print a string in reverse order(for example: "today is Wednesday " to "Wednesday is today"). My professor said we should begin with a null string and build it one word at a time.
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
int nwords(string);
[Code] .....
View 1 Replies
View Related
Feb 21, 2015
i couldnt solve the algorithm exactly. The program asks the user for a string. "Bugun h@v@ cok g'uzel" for example. then the program asks for another string. If that string doesnt exists in the main string program should say there isnt any substring. If it exist then the program should print the remaining part of main string. For example:
Write the first string: Tod@y weather is be'@utiful
write the substring : ug
>>ugun h@v@ cok guzel
write the substring :wldnqwbdbj
>>there isnt any substring
Here where i came so far
#include <stdio.h>
int main()
{
char mainstr[50],substr[50];
[Code]....
View 7 Replies
View Related
Dec 14, 2014
I'm new to c++, so how to print the contents of a map that contains a string and a class of integers for option 1. what formatting should I use?
#include <iomanip>
#include <vector>
#include <sstream>
#include <map>
#include "IPHost.h"
#include "EncryptedConnection.h"
[Code] .....
View 6 Replies
View Related
Feb 23, 2015
I'm reading in a string from the command line into a char array followed by a series of ints which are read into an int array.
The command line
Code: lab3 word word word 0 0 2 3 results in the following output:
Code: Word: .N=▒
Number of Words: 0
Word: .N=▒word word word
Number of Words: 3
Num: 0
Num: 0
Num: 2
Num: 3
Here is the source code:
int main(int argc, char *argv[]){
if(argc < 2){
//command line must have at least three arguments (one
//char, one integer)
printf("Error: invalid number of arguments
[Code] .....
Where is the .N=▒ coming from?
View 3 Replies
View Related
Jan 27, 2014
For the last part of this problem, if player 2 loses the game of hangman, I need to display the letters they did get right. In order to do that, I believe that I need to traverse vector v for the elements that exist in the string hiddenword, and then print those characters that match.
#include <iostream>
#include <cstdlib>
#include <ctime>
#include <string>
#include <vector>
#include <algorithm>
using namespace std;
int letterFill (char, string, string&);
[Code] ....
View 1 Replies
View Related
Feb 12, 2013
I'm writing a program that stores records into a file and then these records can be printed out. A last name, first name, and score is stored to be exactly 36 characters long (using leading spaces to pad) making it easier to retrieve specific records. For example, three records stored in the file would like like this: (the underscores are simply to illustrate the distance, they are not in the file itself)
_______lastname_______firstname__90__________lname __________fname_100___________last___________first __60
When printed out, the names are formatted as follows:
lastname, firstname: 90
lname, fname: 100
last, first: 60
However, when I print them out this is what I get:
lastname, firstname: 90
lname, fname: 100$
last, first: 60H
For some reason, for any record after the first, an extra character is added to the end. These characters are not in the file, so I was thinking that the array for some reason wasn't being filled completely, (the array is initialized to size 36 and 36 characters are read from the file using fread) so it was printing out a random character assigned to the 36th array position. Except the character never changes, (always a $ for record 2, H for record 3, l for record 4 if i remember) and I've tried reducing the array size or the number of character read and it's the string that gets altered, the random character always remains. I figure the problem must be in the print_records function (appending seems to work no problem). Anyway here is my print records and appending records code.
Code: /*
- Prints a single record stored in the file pointed to by ifp.
*/
void print_record(FILE *ifp, int record) {
[Code]......
View 6 Replies
View Related
Nov 7, 2014
I am reading a file then printing the data onto the other file. It is working, however when I check to see if each variable is being properly set after reading the file a issue arises.
Example of the file being read
Code:
Vehicle PV50CAN passed camera 1 at 05:33:26.
Vehicle W867BRO passed camera 1 at 05:33:29.
Vehicle KQ63ARU passed camera 1 at 05:33:38.
Vehicle K954ITQ passed camera 1 at 05:33:40.
Vehicle V220MXB passed camera 1 at 05:33:42.
[Code] .....
View 14 Replies
View Related
Feb 8, 2014
I need c source that give the url txt file and print the txt file
(get the http://site.com/text.txt) and print the (text.txt) file Content.
View 1 Replies
View Related
Sep 13, 2013
The requirement is to capture statistics of uuid occurrences for ALIVE/SEARCH/BYEBYE (it can be all 3, combinations of 2 each, or one alone) in a dynamically populated file in run time.
I am able to print all 3 combinations, but not in combination of 1 or 2 e.g.
If my input.txt is like this :
uuid:22314754-a597-490b-8a93-02cfae01036b ALIVE 16
uuid:22314754-a597-490b-8a93-02cfae01036b BYEBYE 8
uuid:22314754-a597-490b-8a93-02cfae01036b SEARCH 8
uuid:50e65653-7525-485d-83bf-d293558c4264 ALIVE 32
uuid:50e65653-7525-485d-83bf-d293558c4264 BYEBYE 8
uuid:50e65653-7525-485d-83bf-d293558c4264 SEARCH 132
[Code]...
Code:
#include<stdio.h>
#include<string.h>
struct uid
{
char uid_val[100];
char state[100];
int temp_count;
int alive_count;
int search_count;
[Code]...
Gives the following output ->output.txt)
Device ID ALIVE BYEBYE SEARCH
uuid:22314754-a597-490b-8a93-02cfae01036b 16 8 8
uuid:50e65653-7525-485d-83bf-d293558c4264 32 8 132
uuid:55076f6e-6b79-4d65-6497-180373763bc1 113 112 111
uuid:T0100203354 1 2 3
I want to generalize the code such that uuid occurrence does not have to be all 3 (ALIVE/SEARCH/BYEBYE), the occurrences can be any combination and code should work. e.g my code gives wrong results when input.txt contains the following:
uuid:22314754-a597-490b-8a93-02cfae01036b BYEBYE 8
uuid:22314754-a597-490b-8a93-02cfae01036b SEARCH 8
uuid:50e65653-7525-485d-83bf-d293558c4264 ALIVE 32
uuid:50e65653-7525-485d-83bf-d293558c4264 BYEBYE 8
uuid:55076f6e-6b79-4d65-6497-180373763bc1 ALIVE 113
uuid:55076f6e-6b79-4d65-6497-180373763bc1 BYEBYE 112
uuid:55076f6e-6b79-4d65-6497-180373763bc1 SEARCH 111
uuid:T0100203354 BYEBYE 2
I am using ubuntu for gcc/g+ compiler.
View 1 Replies
View Related
Aug 10, 2014
I have a file with data in it, and I'm trying to print that data, but it is:
1) not reading the last file (record #83)
2) it's printing out the last record twice (in this case, #77)
//record data for each tool
int recordNumber;
string toolName;
int quantity;
[Code]....
here is the printData() function
void Hardware::printData(int _recordNumber, string _toolName, int _quantity, double _cost)
{
cout << left << setw(10) << getRecordNumber() << setw(20) << getToolName()
<< setw(10) << getQuantity() << right << setw(10) << fixed << setprecision(2) << getCost() << endl;
}
View 9 Replies
View Related
Sep 4, 2012
I am encoding some information in a binary file, and I want to check what I am doing by printing out all the bytes that represent the file.
This is being done by opening a pointer to the file with fopen, reading in each byte of data as a char, and then writing this char to the screen.
I have some image files (e.g. "image.jpg"), whose structure I know, so that I can test my program.
When I print out the chars, they are initially correct, and follow the structure of the file as expected.
However, after about 40 bytes, I find that every subsequent character is ' ' i.e. a blank character.
I then created a CharToBin function, which allows me to print out the actual bits in the char. When doing this, it shows that all the bits are 1 for the characters. i.e. most of the file is represented by 1's, which is clearly not correct.
This happens on all the image files I have tested, and furthermore, on several other non-image files. They all start printing out ' ' after a while. However, all these files are fine and not corrupted, e.g. the image files display correctly.
Code:
#include <fstream>
#include <iostream>
#include <sstring>
#include <string>
#include <stdio.h>
using namespace std;
string CharToBin(char ch) {
bool bits[8];
for (int i = 0; i < 8; i++)
[Code] ....
View 6 Replies
View Related
Jun 27, 2013
I have done an exercise from "Thinking in C++" to print text from a file to the console one line at a time, with the user pressing enter to get the next line.
My original code is below, how could I change it for one word at a time?
#include <iostream>
#include <fstream>
#include <string>
#include <vector>
using namespace std;
[Code] .....
I tried to alter my program to print one word at a time by changing "getline(in, word)" to "in >> word", but it prints each new word on a new line, the only input I have found to make the next word appear is Enter, I assume that's why.
Is there a way to make it print one word at a time when the user says, but on the same line?
View 4 Replies
View Related
Nov 14, 2013
I need to create a text file that looks like:
first line
second line
third line
forth line
fifth line
sixth line
I want to replace the third and forth lines with three new lines. The above contents would become:
first line
second line
new line1
new line2
new line3
fifth line
sixth line
How can I do this using c++?
never was taught file function in c++
View 3 Replies
View Related
Jun 5, 2014
void readpatient() {
int count = 0;
f = fopen("patient.txt","r");
while(!feof(f)) {
printf("
%d",count++);
p2=new patient();
[Code] .....
Here is what I've tried. I'm trying to read a file aND print stuff in it, but my while loop isn't ending up.. What should i do? It only prints patient name 1 time and after that it prints nothing.
removing system("pause");
results in an endless loop.
View 2 Replies
View Related
Oct 11, 2013
I have to convert a binary value from an input file (the name of which is given by the user) and then convert the binary to decimal value and print that in an output file.
Right now it is compiling just fine with no error messages, but when I run the program, it doesn't end or print to the output file.
Here is my code at the moment:
#include <cstdlib>
#include <iostream>
#include <iomanip>
#include <fstream>
[Code].....
View 2 Replies
View Related
Feb 26, 2015
I need a program that reads the number of lines of a file and then several (max of 20) lines of text from a .txt file so an example of the .txt file is: 2 This is the first string This is string number 2 So it first reads the 2 and then reads the two lines of text. It stores the text in an array of pointers. The code i have so far is:
#include<stdio.h>
#include<string.h>
#include<ctype.h>
#include<stdlib.h>
[Code].....
It doesnt give me any errors but all it does is keep running and doesnt print anything out kind of like its in an infinite loop although i dont see how that could be possible.
View 1 Replies
View Related
Dec 1, 2013
I am trying to read hex data from a file (not just hex values in text format). I was able to read it (02 EC) with "fread" into an char before but I need to change the Hex value into an integer in decimal.
I already read about strtol but I would prefer reading the hex Value into an integer.
Here is my code so far:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main() {
int itrack1[1];
int itrack2[1];
[Code] ....
View 11 Replies
View Related
Jan 14, 2014
I have 3 arrays (even, odd and negative), they are all different sizes, but they maximum elements they can have is 50. How do I write them to a file in this format
EVEN ODD NEGATIVE
2 3 -2
4 5 -4
6 7 -9
Code:
size = 50; //they dont all 50, its just that array cant be bigger than 50
for (int i =0; i < size; i++) {
cout <<setw(5);
if (even[i] != 0) {
myfile << eList[i];
myfile << endl;
[Code] .....
View 5 Replies
View Related
Dec 6, 2013
Following is the program I wrote it basically takes 9 inputs and then save them into binary file. then print out the data stored in binary data and find inverse of it then print the inverse out. but its stuck in a loop somewhere.
Code:
#include <stdio.h>
int main() {
int a[3][3],i,j;
float determinant=0;
int x;
FILE *fp = fopen ("file.bin", "wb");
[Code] .....
View 6 Replies
View Related