I have an external file that I would like to read from this file and place the values into parallel arrays. The file has these values:
Rams
Titans
23
Patriots
Rams
20
Steelers
Seahawks
21
I have trouble reading data from a text file to parallel arrays. the text file (album.txt) has this format:
Code:
(song1 title)
(song1 artist)
(time1)
(song2 title)
(song2 artist)
(time2)
.
.
etc
I want to store these data into three arrays:
title [], artist[], time[] this is what I have so far:
Code:
#include <stdio.h>
#include <string.h>
#define SIZE 9999
int main ()
{
FILE *tFile;
char title[SIZE];
[Code]...
the problem is that each array reads the whole text? I want to store artists name in char artist[] .. titles in char title[] and so on
I have a txt file that looks like this:
Student ID:97707; Grades: 87.73, 90.41, 91.74, 95.04, 99.13; Name:Davis, Artur
Student ID:23628; Grades: 58.09, 65.18, 68.62, 68.62, 98.05; Name:Davis, Susan
Student ID:49024; Grades: 18.37, 66.06, 68.07, 80.91, 96.47; Name:DeGette, Diana
-I need to read the id, grades and names;
-The id to a separate array
-The grades to a 2-d array
-And the names to a c style string.
Where do I start, im having trouble read the dummy to start
int main() {
char filename[15] = "ex.txt";
string names[MAX_NAMES];
double grades[MAX_ROWS][MAX_COLS];
int id[MAX_IDS];
int index = 0;
ifstream fin;
[Code] .....
#include <stdio.h> /* fopen, fclose */
#include <stdlib.h> /* exit function */
#include <string.h> /* string library */
#define STRSIZENAME1 41 /* length of name */
#define STRSIZENAME2 100 /* amount of names */
#define STRSIZEAGE 100 /* amount of ages */
/* Name: main */
int main(int argc, char* argv[]) {
[Xode] ....
This is the code I have so far. The goal of the assignment is to sort two parallel arrays, one with names and another with their ages, at the same time to alphabetize them. I am stuck with trying to pull the data from the file itself and concatinating it. I have searched ways to do so and this is the best I understood. So the error is it will get me the first person's name, but it won't get the age and move to the next line in the file. It just keeps repeating the same thing and I can't figure out why.
I attached the sample file with names and ages to view the format of the text file itself.
PS the other defined variables are used later for sorting the data. right now I am just trying to get the data itself and put it in an array but between my book and the internet I can't seem to store the data properly. That is also why I am printing it in the while loop as well so I can see what my arrays look like but I will take that out too once I know the data is good
Attached File(s)
peoplefile.txt (157bytes)
I have a .txt file that I need to input into two parallel arrays. The first array needs to be on dimension and the second needs to be two dimensions.
This is a sample from the .txt file:
Australia62.762.163.359.7
Austria052.853.154.6
Belgium30.430.327.525.3
Canada61.356.257.754.5
Chile026.425.431.1
CzechRepublic038.327.325.2
Denmark65.067.162.355.0
Estonia51.732.929.834.3
Finland55.242.942.143.3
France35.728.330.228.8
Germany56.447.242.646.6
Greece30.326.925.013.1
Hungary032.521.818.6
Iceland068.271.666.0
this is what I have for code so far:
#include <iostream>
#include <fstream>
#include <string>
#include <iomanip>
using namespace std;
const int SIZE = 40;
const int COLUMN = 5;
void getData(ifstream& inf, string n[], double tstData[][COLUMN], int count);
[Code] .....
when I compile and run the code and have it display it does not read the first item into the 1-d array, instead it appears to read the 4th number from the left into the 1-d array and then into the second spot in the 2-d array, then again in its proper place and finally it has this number repeating through the rest of the arrays:
-92559631349317830000000000000000000000000000000000000000000.00 followed by the number 59.7 from the .txt and the long number again.
I am trying to learn about parallel arrays and files. I believe that I wrote a program that properly writes the data of the arrays into a file, but I am not quite sure how to take the next step and make a second program by bringing in the file I created and reading the information of the file back into two arrays to display them.
Code:
#include<iostream>
#include<fstream>
#include<string>
usingnamespace std;
[Code] ....
i'm facing some problems with the array, as I have my .h and .cpp files so do i declare them as per norm of how we usually declare a function?
pointtwod.h
class PointTwoD {
private:
int xcord,ycord;
float civIndex;
LocationData locationdata;
[Code] ....
when i compile the error message i get was even when i i put in int xord[]; in my PointTwoD.h file:
PointTwoDImp.cpp:99:6: error: prototype for 'void PointTwoD::storedata(int*,int*,float*) does not match any in class 'PointTwoD'
PointTwoD.h:48:8: error: candidate is: void PointTwoD::storedata(int, int, float)
PointTwoDImp.cpp: 135:22: error: 'xord' was not declared in this scope
PointTwoDImp.cpp: 135:27: expected primary-expression before ']' token
PointTwoDImp.cpp: 135:30: error: 'yord' was not declared in this scope
PointTwoDImp.cpp: 135:35: expected primary-expression before ']' token
PointTwoDImp.cpp: 135:38: error: 'civ' was not declared in this scope
PointTwoDImp.cpp: 135:42: expected primary-expression before ']' token
I am attempting to reconfigure a working code that before used while loops and if statements to convert a numeric score to a letter grade. I now wish to take this same code however I want to change the char convertGrade(int numScore) to simply use a parallel array as a replacement to the if statements.
The array needs to consist of 3 arrays of fixed size 5:
int minScores[SIZE]
int maxScores[SIZE]
char letterGrade[SIZE]
I know the declarations need to go in the function convertGrade but this is the first time I have worked with arrays and I am having trouble trying to figure out how this array will replace my previous if statement.
In order to access the array elements I need to write specifications such as
minScores[i]
maxScores[i]
letterGrade[i]
(where i = 0, 1, 2, 3, or 4)
#include <stdio.h>
#include <stdlib.h>
#define SIZE 5
int getScore(void);
char convertGrade(int numScore);
[Code] .....
So the point in this code is to promt the user to enter a product ID. It then should search the ids array and display the corresponding price and quantity from the prices and quantities arrays. I'm sure this is quite simple but I am new to programming and having trouble understanding arrays. All it is doing is giving me the first subscript when I input a -1.
//Advanced34.cpp - displays the price and quantity
//associated with a product ID
//Created by Scott Knight on April 12, 2014
#include <iostream>
using namespace std;
int main() {
//declare arrays and variables
int ids[5] = {10, 14, 34, 45, 78};
[code]......
I am having a problem with my program to calculate the GPA of a student. The problem that I am having is that I am not able to get my Total Point Value to display the sum of the two arrays. The multiplication for the array is correct and will display correctly, but instead of putting the total into the accumulator it will display the totals in a column. I have tried moving the coding for the calculation out of the loop that converts the letter grade into a point value,and placing it in it's own loop, but I still get the same display output. Below is the code that I have so far. I still have a few elements to add to the code, but they will be easy once I get this display to work right.
#include <iostream>
#include <iomanip>
#include <fstream>
using namespace std;
// Global const
// prototype
int main () {
// Varialbes, Arrays
[Code] ....
Class programming project where we declare two arrays, a sting array containing the names of the boroughs and an int array which which holds accident number for each borough. The main function calls getNumAccidents() function to fill the array. it then calls findLowest() to learn which borough had the fewest accidents. It should print out the accident numbers for each borough and then out the borough and accident number with the fewest accidents.
I'm able to get the program to kind of work. When I run it everything works fine but I am not able to get the arrays to sort and match up correctly..
#include<iostream>
#include<iomanip>
#include<string>
#include<cstring>
using namespace std;
class combineSort {
public:
combineSort() {
[code]...
I've been working on an assignment that deals with newspaper advertisements. I have two arrays:
categoryCode (the code for the advertisement's category such as pets, cars, etc) and
numWords (number of words in the ad).
The arrays are dynamic.
My assignment has the category listed each time there is an ad associated with it and then its number of words for that ad. If this were a real-world issue I would want my output to list each category only once despite how many ads were in it, list how many individual ads are in the category, and its total number of words for the ads in that category. When using parallel arrays, is there a way to do this?
Let's say I have categoryCode with three elements {5, 5, 7} and numWords {10, 12, 15}.
How would I make the numWords add together only when the categoryCode values are the same?
I would want the output to print:
Category 5 Ads 2 Words 22
Category 7 Ads 1 Words 15
rather than how my instructor is having us do it like this:
Category 5 Words 10
Category 5 Words 12
Category 7 Words 15
I think I'm getting hung up because my mind is confusing the element's location in the array with the element's actual value and I'm probably making this harder than it should be. How would I compare the categoryCode values in a dynamic array? If it were a fixed size I think I could just compare categoryCode[0] to categoryCode[1] and so on, right? But in this case I'm not sure how I would go about that.
In pseudocode and in C code, declare two 1-dimensional parallel arrays of Integers to store the age and weight of a group of people that will hold the information of up to 10 people. Use a For loop to iterate through the array and input the values. This is the code i have, but my array is showing up as 11 and not 10?
Code:
#include <stdio.h>
int main() {
//Define Variables
float Age_Data[10],Weight_Data[10];
float Age_Input,Weight_Input;
[Code] .....
I'm making a Jeopardy game and when I read text from a file into arrays to set the categories, questions and answers a couple of the strings are not terminating and they are printing that junk box thing at the end.
When I use the debugger and print the problem strings they are showing up as "Thanksgiving21" or "Calvin Klein21" but all the other strings aren't having that problem.
Then for example I will change "line[strlen(line)-1] = '';" to "line[strlen(line)] = '';" and other strings will have that problem but not those stated ones. I'm using line[strlen(line) - 1] = '' to get rid of the newline fgets appends on the end of the strings.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main(int argc, char *argv[]){
FILE *file = fopen("questions", "r");
char *string[66], line[150];
int idx;
[Code]...
I have to read 2 arrays, put them in a file. Then make a 2nd program, read the data from the file and show the 2 arrays. I believe I have fully completed the first program, but I am still working on the 2nd one. On the 2nd one I am trying to create a function that displays the data from the file.
//first part
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
const int num_stores = 3;
const int col = 4;
const int size=4;
void showData( const string[], const int[][col], int size );
[code]....
What i try to do is to write a code which reads some specific values from a file and stores them in an array. My File looks like this
Code:
XFOIL Version 6.96
Calculated polar for: Myfoil
1 1 Reynolds number fixed Mach number fixed
xtrf = 1.000 (top) 1.000 (bottom)
Mach = 0.000 Re = 0.200 e 6 Ncrit = 4.000
}
[code]...
Read the input file of data ( employees.txt) and store them in arrays. This company can have up to 55 employees [b]i need to do these following in these program:
Write a function to read the input file and store the data in arrays.
Write a function to calculate regular pay.
Write a function to calculate overtime pay
Write a function to calculate gross pay.
Write a function to bubble sort the employees into order by last name, first name.
Write any swap functions that are needed.
Write a function to write output to a file called payroll.txt
Format of file is EMPLOYEES.TXT[/b]
Hours Pay Rate Employee Number First Name Last name
40.0 10.00 A1234 Jane Adams
50.0 10.00 L8765 Mary Lincoln
25.5 10.85 W7654 Martha Washington
52.0 15.75 A9876 John Adams
45.0 25.00 W1235 George Washington
40.25 55.00 L9087 Abraham Lincoln
30.0 9.75 T9876 William Tell
42.5 12.50 M7654 Missy Muffett
30.0 10.00 P8765 Peter Piper
HERE IS MY CODE SO FAR:
#include <iostream>
#include <cstdio>
#include <fstream>
#include <string>
#include <iomanip>
using namespace std;
void tellUser();
[code]....
how I can read information from a text file into an array so afterwards I can display the array and it will show the contents of the text file?
the information inside my text files consist of names and numbers like so: "Collins,Bills 80" should I separate the numbers and names into two separate text files one for names and one for numbers?
My code so far is this:
#include <iostream> //for cin and cout
#include <fstream> //for input/output files
#include <conio.h> //for getch
[Code]....
A company uses two text files: one to store employees' details and another to log their sign in/out time.
The details file - called details.txt" has the following format: ID, Name, Date of Birth, SSN, Department, Position - separated by spaces.
An extract from the file looks like this:
10 alice 4/23/1972 123-45-6789 support assistant
3 bob 6/7/1980 111-12-1134 logistics manager
1 carol 10/2/1963 987-123-1143 admin ceo
2 dave 10/3/1974 902-22-8914 admin cfo
17 erin 6/13/1991 126-83-1942 technology supervisor
15 frank 2/22/1987 303-12-1122 logistics assistant
"timelog.txt" contains daily logs of when employees arrive and leave. It has the following format: ID, Date, Arrival Time, Departure Time - separated by spaces. An extract from the file looks like this:
10 2/11 0900 1700
3 2/11 0930 1730
1 2/11 1100 2000
2 2/11 1000 1530
17 2/11 0900 1700
10 2/12 1000 1830
3 2/12 0930 1730
1 2/12 1100 1900
2 2/12 1030 2000
17 2/12 0900 1700
15 2/12 1100 1600
I have to write a program that searches for specific records using some search parameter, and displays them. Ok first i have to read the data from the files and store them. this is what i have so far....
#include <iostream> //Accesses libaries for console input and output
#include <fstream> //Needed to access the fstream object to read files
#include <string> //Needed to access the string class
#include <cstdlib>
[Code] ....
I know my class and array code is totally wrong i dont know how to store the data for the info is in integer and string form... do i use strings, arrays?
I am trying to write to external file in GCC. So far I can get to this:
#include <iostream>;
#include <fstream.h>;
using namespace std;
int stream (int argc, char* const argv[]) {
ifstream in ("mcp.strings");
[Code] ....
I need to know if I am using the correct method to choose file name. And how to set a script(double) variable to print input text or choose an on/off (0|1) input to be written to a text file.
Any links to flags (i.e. pointers and how to use them).
I want to be able to make this code read those two lists from an external .txt file from my desktop for example. This will make it so I can read larger amount of words instead of having to paste them all in this script.
So instead of
std::istringstream tokens_in(
R"(word4
word5
word6
word1
[Code] ....
I want it to find those lists externally. How could this be done, if possible even?
How is it possible to store the related data of a program C++ into an external file (like as .txt) and retrieve it?
I want to write c++ program that can contain data members " id and phone"
like as
Code:
class profile {
private: int id,phone;
public:
void retriever() {
cout<<"Enter your ID: ";
cin>>id;
cout<<"Your Phone number is "<< phone;
};
}
avoiding formats in above class, purpose is to store data already in txt file with different id and phone numbers and it is to be retrieved by matching id number to txt file and viewing its related phone number.
Is it possible to create a program like Robocode, a game controlled at runtime by an external source file in visual c ++? For example create a checkers game where there would be an external source file, read at runtime, which would play automatically, with artificial intelligence. You can? If yes, how?
View 9 Replies View Relatedreading and writing 2D arrays I've been trying out a few tutorials using FileStream but I couldn't get any of them to work.
Anyway what I'm trying to do is save the playerArray to a .txt file and then read from that .txt into the fields within the GUI. This is supposed to act as a database.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
[Code]....
Trying to do a homework assignment for a class and how to read a file into an array. I've looked in our book and on several other forums and cant seem to find any examples of this. Below is the assignment I'm working on. I have a shell of the program that I can get to run, but getting a .txt file to read into an array is something I cant seem to figure out how to do.
Write a program to read N data items into two arrays, X and Y, of size 20. Store the product of the corresponding pairs of elements of X and Y in a third array Z, also of size 20. Print a three column table that displays the arrays X, Y, and Z. Then compute and print the square root of the sum of the items in array Z. Compute and print the average of the values in array Z and print all values above the average of array Z. Determine the smallest value in each array using only one function.
Use the two data files named DATAX.TXT and DATAY.TXT.
You must use functions for the reading of the data, computing the average, printing the three column table and printing the values above average.
writing this program where you can search a structure array for existing elements, add new elements to the structure array, and find and display entire elements of the array structure and all.
Right now I am stuck on adding new elements to the structure array.
#include <iostream>
#include <string>
#include <iomanip>
[Code]....
Any methods to displaying the a array structure or editing it ....