Using the array to accept 10 testscore. Calculate and print the highest, lowest, fifth test score entered and all the test score entered in reverse order.
How i would get it to print the highest,and lowest and in reverse order. I'm confused as to what to do...
it compiles and runs, it gives me the average and the highest score but says lowest is 0 even though 0 is never entered.
Write a program which uses an array of 5 scores and calculates the average score, the highest score and the lowest score.
#include <iostream>
using namespace std;
int getHighest(int [], int);
int getSmallest(int [], int);
double getAverage(int [], int);
int count;
int numbers;
[Code] ......
I am writing a function called swap that sorts the elements of an array in order from highest to lowest values where they descend and ascend. A particular thing about this function is that swap does NOT re-arrange elements in the array so it just uses a second array of indexes for the elements in the original array and then swap sorts the second array based on the values in the original array. A sorted version of the original array can then be produced with these sorted indexes. You can declare and initialize the original array without any user input.
For example, int arr[10] = {1, 5, 22, 14, 6, -5, 7, 9, 12, 15 };
Header of the function swap must be as shown below: void swap(int array[],int swapedIndexes [], int size, char mode) When mode is 'a', the function sorts the array in the ascending order, and when mode is 'd', the function sorts it in the descending order. int swappedIndexes[5];swap(array,swappedInde… 5, 'a');
So far I have this code that randomly generates arrays of 10 elements and I found the max and min, but I am confused on what to do about the swapping part? Also, how to make the numbers ascend or descend in numerical order?? Here is what i have done so far:
#include<ctime>
#include <iostream>
using namespace std;
int min(int [],int);
void max(int [],int , int &);
void main()
{ srand(time(0));
//1-declare
[Code] .....
Create a 1-D Array to hold a set of exam scores:
55 74 93 84 64 72 69 78 87 84 72 33 83 68 62 51 88 90
Write a program to do the following tasks:
1. Display scores in rows of four(4) scores.
2. Calculate average score and display.
3. Find Lowest score and display.
4. Find Highest score and display.
5. Find the deviation of each score, and display the score and its deviation.
6. Find the Standard Deviation and Display
7. How many scores are within One Standard Deviation
So I have the average down, but I am getting stuck at the part of displaying the highest and lowest score. Every time I run the program I get two giant negative numbers for both of them. I put all the scores into a .txt file and I just opened in through the program.
#include "TCHAR.h"
#include <iostream>
#include <fstream>
#include <iomanip>
[Code]....
I can display the highest and lowest score but I can't display the number of students who got the highest and lowest score.
int h=array[1];
int l=array[0];
int m=0,n=0;
for(int z=1; z<=20; z++) {
if(array[z]>h) {
h=array[z];
[code]....
this should be the output
12 students got the highest score of 45
8 students got the lowest score of 1
I was asked to create a C++ program that allows a user to take a test with series of different questions, and also retake the test if they choose to. I have been able to do that. But the other condition is to display the highest and lowest scores (highest and lowest correct answers) the user got, and in which test they got that score. For example, if the user takes the test 3 times, in which test did they get the highest score, and in which did they get the lowest score.
This is how far I went with the program. The code below only let the user take the test as much as they want, and tell them how many times they took it, and the last score they had. My idea is this, if I can make a variable store each test score, then I can compare them. But since there is no definite number of tests to be taken.
#include <iostream>
#include <string>
using namespace std;
void main() {
int correct = 0;
int wrong = 0;
[Code] .....
I have to print out which months have the lowest and highest amount of rainfall. I know how to find the lowest and highest value but how do I match them with there month?
#include <iostream>
using namespace std;
int main() {
const int rainfall = 12;
double months[rainfall];
int count;
[Code] .....
Write a C program that accepts 8 user input ratings on a new game. Print the lowest and highest ratings received. Use functions.
When i put in values to test the data it's not replacing highest or lowest it's just saying "The highest is 0.0" "The lowest is 0.0"
[#include <stdio.h>
double LowestAndHighest (double num);
void main(){
double num;
double RatingReceived =LowestAndHighest(num);
printf ("%lf", RatingReceived);
[Code] ....
I have everything down except for the highest # and lowest number being displayed.
The arrays are 23, 4, 76, 89, 12, 43, 37, 67, 21, 14.
I have the average which is 38.6 but i stuck getting highest number and lowest.
1. Construct a class diagram that can be used to represent food items. A type of food can be classified as basic or prepared. Basic food items can be further classified as meat, fruit, veg or Grain. The services provide by the class should be the ability to enter data for new food, to change data for food and to display existing data about food.
using this class definition write a main program to include a simple menu that offers the following choices:
1. Add food
2. Modify Food
3. Delete Food
4. Exit this menu
2. Read a list of numbers from a file and then print them out in reverse order. State whether the list is palindromic or not.
I have this multi-dimensional array. There are 12 rows, each represents the months, and 2 columns, the 1st column represents the lowest temperature and the 2nd column represents the highest temperature.
I need to find the lowest temperature in only the first column and the highest in only the 2nd column.
This takes in the temperatures. LOHI = 2, MONTHS = 12, LOW = 0, HIGH = 1
void PopulateTemp(int temp[][LOHI])
{
for(int month = 0; month < MONTHS; month++)
{
cout << "Month " << month+1 << endl;
[Code]......
My professor said we only needed 1 for loop as you only need to read the data from one column in each?
I am doing a modification to a school project call rainfall statistics. I have that written, but need to sort the array and list rainfall totals from highest to lowest. I thought I knew what I was doing but I am having some difficulty locating all my errors, the error I keep getting now is:
1>------ Build started: Project: Rainfall Statistics Program, Configuration: Debug Win32 ------
1> Rainfall-main.cpp
1>Rainfall-main.cpp(88): error C2601: 'sortHighest2Lowest' : local function definitions are illegal
1> Rainfall-main.cpp(25): this line contains a '{' which has not yet been matched
1>Rainfall-main.cpp(96): error C2065: 'TOTAL_NUM_OF_MONTHS' : undeclared identifier
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
Below is my code, I know i'm missing something, just can't see it.
#include <iostream>
#include <iomanip>
#include <string>
using namespace std;
//Here are the function prototypes
double getTotalRainfall(double[], int);
double getAverageRainfall(double[], int);
[Code] .....
// I believe my loop for the functions work but the values are not returning !
// Acoustic data
#include <iostream>
#include <fstream>
using namespace std;
double low( double []);
double high( double []);
void readArrayr( double [], double , double);
[Code] .....
Write a for loop statement to print the numbers from 1 to 10 in reverse order separated by star :
10*9*8*7*6*5*4*3*2*1
i try to do it but it show me like this :
10*9*8*7*6*5*4*3*2*1*
how do i write to show me like the first one ?
Implement a recursive function named void printBack(DoublyLinkedNode<T>* node) for the class DoublyLinkedCircularList which will print out the elements in the list from back to front. The function is initially called with the first node in the list. You may not make use of the previous(prev) links
This is my solution where I got 2 out of a possible 3 marks:
template<class T>
void DoublyLinkedCircularList<T> :: printBack(DoublyLinkedNode<T>* node) {
if(node->next == NULL) //Correct- 1 mark
return 0;
else
printBack(node->next); //Correct - 1 mark
cout << current-> element << " ";
}
I am having a problem printing out the results for my code, It is supposed to print out the largest and smallest value in the array, but keeps giving me a value not entered and I don't know why.
//This program lets the user enter 10 numbers and then display the highest and lowest number.
#include <iostream>
#include<stdio.h>
using namespace std;
int main() {
const int NUM_ENTERED = 9;
int number[NUM_ENTERED], highestValue = number[0], lowestValue = number[0], count=0;
[Code] .....
#include <stdio.h>
float total, avg, max, min;
float judge[4];
int index;
int array[4];
int main() {
total = 0.0;
max = array[0];
min = array[0];
[Code] ....
I dont understand how to make the array when it prints out only print out the final average and the final maximum score with the final minimum score but what its doing at the moment is just giving an average for each individual score taken...
Minimum and maximum scores are displaying 0.0
And it displays these things 4 times in a row i just want it to be displayed once.
The program should store a character array in reverse order then display the reversed array. I have also included in the code that will display the actual characters into the array as it loops through. So I know the characters are being stored, but why doesn't it display the entire string when I call it?
Code:
#include<stdio.h>
int main(){
char str[50];
char rev[50];
printf("Enter Desired Text: ");
scanf ("%[^
[Code] ....
Is it just my compiler?
I need fastest method to reverse order of bytes in my char array.
For example i have:
unsigned char buf[8];
// consider data stored in buf is 88 77 66 55 44 33 22 11
// how to reverse it to: 11 22 33 44 55 66 77 88
// currently i can do it by equal assignment , i make another buf like:
unsigned char buf_ok[8];
[Code] ....
// This does reverse the bytes as i want but its very slow , i am looking for fast method ..
I'm trying to use a priority queue sorting in reverse order to take a vector or 2d array. The problem is that I want to sort by the vector/array cell value but keep the reference to the vector/array index of the value. I don't know quite howto keep them both related so when I pop. I can find the corresponding cell.
priority_queue<int, vector<int>, greater<int> > Open;
How can I properly find the lowest and the highest temperatures?
#include <iostream>
#include <string>
using namespace std;
[Code]....
I'm having trouble, I want the inner loop to display the lowest and highest score. If I assign initial values for the high and low score, it won't always work (because if no/ all scores are above/ below my initial values...)
But without assigning initial values for highscore and lowscore, One of them will always be undefined during the first runthrough.
#include <iostream>
using namespace std;
const int AGRADE = 90;
const int BGRADE = 80;
const int CGRADE = 70;
const int DGRADE = 60;
int main() {
[code]....
how do i set this up so it stores a low and high score, and then compares those to each next number in the series?
I am trying to calculate the largest and smallest values using functions. I keep getting this (pointer-to) error
#include <iostream>
#include <conio.h>
using namespace std;
void getValues(int [], int);
void displayValues(const int[], int);
int largest(const int[],int);
int smallest(const int[],int);
void displayLargestSmallest(int,int);
[code]....
I cannot get this program from having a continuous loop. I need to have a user-defined loop.
Here is what I have so far:
Code:
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
int a,b,c,high,med,low;
[Code] ....
How do i sort numbers from highest to lowest using qsort? I dont have a code. I dont know how to use this one.
View 1 Replies View RelatedI am trying to correlate the student's highest score with that student's ID. The old code is in blue and the new code is in green which includes a sort. The particular information in question is in red.
Ide1
Code:
#include <stdio.h>
int main(void) {
/*Set up two arrays to include up to 50 elements each.*/
int st_numval_id[50] = {0}, st_val_tstscr[50]= {0}, i = 0, j = 0, temp;
[Code] .....
Enter the student's id and test score:
/*After the following input, then enter 0 to end the input*/
Student ID Test Score Letter Grade
------------ ----------- --------------
1653 77 C
1945 72 C
1020 50 F
1955 92 A
1900 81 B
ABOVE AVERAGE STUDENTS
Ave Test Score Students Above Ave Number of: A's B's C's D's F's
----------- ---------- --------- --- --- --- --- ---
62.00 4 1 1 2 0 1
THE STUDENT WITH THE HIGHEST TEST SCORE
Student ID Test Score Letter Grade
--------- ---------- ------------
1900 0 F
Press any key to continue...
