I have attempted a couple of different times to open a .txt file in a program, however it always goes to the "file was not opened."
Code:
#include <stdio.h>
#include <stdlib.h>
int main()
{
FILE *inFile;
[Code]....
I have problems opening a file within a directory.
#include <dirent.h>
#include <string>
#include <vector>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
[Code] .....
Error Message:
$ ./dirsearch ~/Documents/College/textfiles/
[..]
[yomama.txt]
Error : Failed to open entry file - No such file or directory
Here are my current file permissions:
textfiles$ ls -l
total 8
-rw-rw-rw- 1 jav jav 7 Apr 26 13:14 moretext.txt
-rw-rw-rw- 1 jav jav 10 Apr 26 12:38 yomama.txt
When I try to open the cpp source in Visual Studio, it just opens a blank notepad window. The cpp file says its 4 kb and there was code in it.
View 5 Replies View RelatedI would like to know what is the best compiler for a very simple program. I'd like to be able to print a pdf file without opening it.
View 3 Replies View RelatedI need to find if a file is locked, but I dont want to open the file as I will be checking 1000's of files.
can I do that in C++ or VC++
How to open a file and just print what is in that file on the screen. I though maybe I had the directory wrong but putting G: or G: give me the same result. When I select 1 it just goes to the next line and doesn't print anything.
Code:
int getchoice(void)
{
int num;
int choice;
FILE* outputfile;
[Code] ....
how to open an audio file using c. write a code to open an audio file.
View 2 Replies View Relatedthis is my read/write functions based the read from the last post! then went nuts with it! used the %19s%*s on the write to the file, solved all the probs on the read side! but any refining on this would be great. This is another program that i started with the forums, and started going my own direction!
Code:
void WriteAccount(int account,char *a[])
{
FILE *fptr;
char Memo[20];
char buff[20];
double Amount;
struct tm *sTm;
}
[code]....
the a[] is a string array with bank account names, and Account is the number on the menu based list.
I am getting an error when i try to open FILE which user must enter then program must open that file i an function and copy string from that file in other .
Error is expression (stream !=NULL)
insert Code:
#include <stdio.h>
#include <stdlib.h>
void FileCopy(char a[],char b[]);
void main() {
char a[40],b[40];
[Code] ....
Can we open a file in c++ using a variable(either character or int)?
View 1 Replies View Relatedhow do you open a file inside of a void function
this is the code i have
#include <iostream>
#include <fstream>
#include <sstream>
[Code]....
why this is looping in an error message. I am inputting the entire file name when I run the program and it just keeps falling into my "if(!inputfile)" statement. Let me know if there is anything I'm just not seeing.
#include "File.h"
#include <iostream>
#include <fstream>
#include <string>
[Code]....
ofstream infile;
infile.open("Input.txt");
if(infile.fail()) {
cout << "Error Opening File in Input" << endl;
system("pause");
exit(1);
}
So I'm trying to see if it fails, but if i change "Input" name would the computer just create a new file name of it for example if i change "Input" to "asdf" the computer is just going to create "asdf" how do i fix it.
My project includes opening and reading a text file ("customers.txt"). This is my text file:
6
Joe
P 10.02 Y
Mary
r 15.50 N
Dan
U 19.00 y
Victoria
R 6.50 y
Nick
n 0 Y
Vigo
p 18.27 N
I wrote this code, but it seems not to find the text file.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
ifstream inputFile;
int number;
[Code] ......
The code below is used to return a file path.
private string BrowseJournalFile(string startRelativePath)
{
string str = "Journal files (*.log)|*.log|All files (*.*)|*.*";
return PathTools.BrowseFile(startRelativePath, str, this.RootPath);
}
So once I click browse I get something like "E:New Files" But there is this .log file in this folder which I want to automatically store in this path.
Right now I have to click on this .log file and then select open. Is there a way I can directly load the file.I have been trying to use the FileStream but no luck.
_wfopen and fopen don't open exist file... File name I viewed during debugging
Code:
wchar_t *CurrentDir = new wchar_t[512];
GetModuleFileNameW(NULL, CurrentDir, 512);
int sz = wcslen(CurrentDir);
for (int i = sz-1;;i--) {
[Code] .....
I am writing to write a program and performs the following tasks
- Reading a file (txt file contains some temperature values)
- Display the temperature values (contents of the file)
- Calculating the average of the temperature values in the file.
- finds the maximum and minim value of temperature in the file.
The program is user interactive and waits for the user input and process according to his input (choice)
I have managed to complete the program and covered all the expect except the error handling for file opening and reading, although I have managed to do it for the part one part (i.e for the choice == 1)
I can repeat it for the other choices (i.e for 2, 3 ) but I do not want to repeat the code and do it in a different function or do it once for all. While making an attempt I can not handle the rest of the program and all the program turns into a mess.
#include <iostream>
#include <fstream>
#include <iomanip>
int menu();
int myChoice(char);
char inputValidating();
[Code] .....
Need Error handling for file opening and Reading that is used once, So far I have managed to do it for choice 1
Text file can be found in the attachment
I have an idea which i will try to implement in C++,I want to compress file size through making my own numbering system which is 80-based number, I do really want to know whether this even possible ? I learnet that Hexadecimal uses symbols like A, B, C, D, E, F to represent 10,11,12,13,14,15 -- and that's what i want to do to my own numbering system but in a bigger scale .if possible: How can i use C++ to open a file in Hex mode ?
View 6 Replies View RelatedI am trying to open a file from local Path by the follwing code
CString csRegExtractFileRemote;
CFileException ef;
CFileStatuscfsStatus;
CFile cfSAP;
csRegExtractFileRemote = "c:SWRemoteFilesample.txt";
[Code] ....
Compilation is success full ,but i am observing that some junk value is there in the path variable. After Reaching If statement cursor went to final return statement ...
I'm making a small MFC module that should generate a report (formatted using HTML) and then display it for a user on schedule at 8:30 AM every day. Pretty straightforward stuff.
I compose my report and then save it as a local HTML file in the CSIDL_APPDATA folder. I then use the following calls to display it using the default web browser (Internet Explorer in this case):
Code:
//Error checks are omitted for brevity
CoInitializeEx(NULL, COINIT_APARTMENTTHREADED | COINIT_DISABLE_OLE1DDE);
ShellExecute(NULL, NULL, strSaveFileTo, NULL, NULL, SW_SHOWNORMAL);
This module is run on schedule from the Task Scheduler. (The task is set up to run when a user is logged on, which is all the time for that PC. It is never turned off, put to sleep, etc. That computer has only one user that is never logged off either.)
This works perfectly fine when I test it by setting the task a minute or so in the future. But when the actual task is supposed to run at 8:30 AM, when the user wakes the screen all they see is a blank Internet Explorer page. (Note that if someone refreshes that page by hitting F5, only then my report is shown on the screen.)
So I started looking into it:
1) I checked that the file is properly saved (before calling ShellExecute) by reading it back and by comparing it with the original HTML markup that I saved earlier. It's all correct there.
2) I then checked the power saving options. That computer is set up to show screensaver after 5 minutes and to turn off screen after 25 minutes.
3) The web browser that causes this issue is IE version 11, with the latest updates installed. The operating system is Windows 7 Professional.
And why is IE showing a blank page only when computer is running unattended?
I am trying to write my files to another subfolder . Below is my program.
Code:
cat th6.c
#include <pthread.h>
#include <stdio.h>
#include <string.h>
#define SIZE 8
#define NUMELM 8
[Code] ....
I observe my filename along with directory as text in the new file created in sublfolder. This is output.
[cporgs/apue/threads]: mkdir first
[cporgs/apue/threads]: ./a.out test.txt first
test.txt -- first/test.txt
dfdfdfdfdfdfdf-14
dfdfdfdfdfdfdf-14
in thread test.txt first
[cporgs/apue/threads]: cat first/test.txt
dfdfdfdfdfdfdffirst/test.txt
[cporgs/apue/threads]: cat test.txt
dfdfdfdfdfdfdf
I could not able to get from where this filename and folder is getting added.
Ben has been administering a MBTI personality test. Now he has all the responses, but the task of scoring and compiling results seems daunting. The personality test* is a series of 70 questions for which the available responses are ‘A’ and ‘B’. Based upon the answers to the 70 questions, a personality profile is determined, categorizing the degree to which the responses place the person on four scales:
Extrovert vs. Introvert (E/I)
Sensation vs. iNtuition (S/N)
Thinking vs. Feeling (T/F)
Judging vs. Perceiving (J/P).
Each of the 70 questions relates to one of the four scales, with an ‘A’ response indicating the first of the corresponding pair (E, S, T, or J) and a ‘B’ indicating the second (I, N, F, or P). For instance, an ‘A’ response on the question: At a party do you:
A. Interact with many, including strangers
B. Interact with a few, known to you indicates an Extrovert rather than an Introvert; just the opposite for a ‘B’.
For this test, each question is designed to influence one of the four scales as follows:
questions 1, 8, 15, 22, 29 … are used to determine E/I,
questions 2, 9, 16, 23, 30 … and 3, 10, 17, 24, 31 … to determine S/N,
questions 4, 11, 18, 25, 32 … and 5, 12, 19, 26, 33 … to determine T/F, and
questions 6, 13, 20, 27, 34 … and 7, 14, 21, 28, 35 … to determine J/P.
Notice these come in sequences of “every 7th” question.
The goal of the test is to determine which end of each of the four scales a person leans, and to thus classify him/her based on those leanings (e.g., as ENFJ, INTJ, etc.). Since Ben would also like an indication of how strongly the test taker fell into each of the four, the program should print the percentage of ‘A’ responses for that scale.
Input for this program should come from a file responses.txt. The first line of the file will contain a single integer, n, indicating the number of test results to follow. Each of the following n lines will contain the first name of the test taker, a single blank, his/her last name, a single blank, then the 70 responses he/she gave on the test. Although the test instructions indicate that the results are most valid when all questions are answered, sometimes respondents leave questions blank. In that case, a dash appears at the corresponding place in the list of responses.
Output for the program should be written to the file types.txt. It should include a well-formatted report listing, for each test taker, his/her name, the percentage of ‘A’ responses in each scale, and the resulting personality type. A tie within a scale should result in a dash (‘-‘) for that part of the personality type.
I am trying to stream data to a file, and then return to the file to add further data. When I add data the second time, I then want to update the value of the second byte in the whole file. I can't seem to do this!
Here is my sample code:
Code:
int a = 1;
int b = 2;
int c = 3;
int d = 4;
int e = 5;
int f = 6;
int g = 7;
int x;
fstream out1("file.dat", ios::out | ios::binary | ios::trunc);
[code]....
The output I get is "1, 2, 3, 4, 5, 6", but I want to be getting "1, 7, 3, 4, 5, 6", because in "out2", I seekp to the second integar entry, and change it to "7".
I have also tried using ios::ate in the constructor for "out2", but this gives me the out put "4, 7, 6, 6, 6, 6", which is suggesting that when I create my fstream object "in", any seekg commands are relative to the beginning of the "out2" stream, rather than the "out1" stream.
I need to find inverse of a matrix data in binary file should be used to form matrix.its not finding inverse correctly rest is working good.
Code:
#include <stdio.h>
void createbin();
void display();
void inverse();
int main()
{
createbin();
display();
inverse();
[Code] ....
I want to input data into text file while not deleting the original data in the file and I use something as
ofstream writefile;
writefile.open("example1.txt");
if (writefile.is_open()) {
for(j=0; j<N; j++) {
[Code] ....
But this will delete the original data.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
int r = 0;
int c = 0;
int num[17][15] = { 0 };
[Code] ...
// Here is my code for displaying the data from the text file into a 2d array and height next to it, but I am not able to diaplay the height from 60 to 76 next to the row of the 2d array, as shown in the table below. This is my program:
Recently the health authorities have listed a new way to calculate the body mass index (BMI) of an individual.
Values of 20 – 24 are classified as normal, 25-29 as overweight, and 30-34 as heavy.
The table below is a portion of a typical BMI table.
BMI:202122232425262728293031323334
Height:
60102108113118123128133138143149154159164169174
61106111116122127132138143148153159164169175180
.
.
.
MY task is to write a program that does the following things:
1.Produce the table by reading in the data from bmi.txt (on Moodle) into a 2-D array.
2. Display the table neatly on the screen, with row and column headings. The BMI should go from 20 to 34. The height should go from 60 to 76 inches.
3. Prompt the use for their height (in inches) and their weight.
4. Make the program print the closest BMI.
If their weight is lower than the values on the table, use 20 as the BMI.
If their weight is higher than the values on the table, use 34 as the BMI.
5.Loop the program so the user can find more BMI’s.