C++ :: Bubble Sorting Vectors - Display Highest Temperature And Occurrence Time
Feb 12, 2013
I'm doing a project where I have to store information gathered (temperature and the time it was taken in seconds) in two separate vectors. After an unknown amount of data has been entered, and the end-of-file has been reached, I have to display the highest temperature and the time(s) it occured (bear in mind that the highest temperature may be recorded more than once). The output of that part should be as follows:
Highest temperature: 51
Recorded at time(s):
22:45
2:27
Something like that. The time should also be converted to hours and minutes. To the point: I've done some research on bubble sorting, but they only use it for arrays.
View 3 Replies
ADVERTISEMENT
Dec 14, 2014
it's not my primary language, so my code variables are in my language.
Code:
FILE *eng;
eng = fopen("eng.txt", "r");
if(eng == NULL){
[Code]....
fclose(eng); It's a piece of my code. Some explanation: From file, where is full of words under selves. I cut it on word and from word i'm printing:
1) word
2) how many letters in the word
3) word backwards and
4) viz. problem is down
For first: There i have warning: while(feof(eng) == NULL); like (comparison between pointer and integer) i don't get it. For second i have a big problem. I must from every word print the most recurring character.
For example: nondeterministically -> the most are N and I. And if, there is more then one most reccuring char, you choose one of them.
View 5 Replies
View Related
Jan 19, 2014
I have an assigment and I don't know yet how to write this program :" I introduce the average monthly temperatures of a year(12 values for 12 months). When I compile the program it needs to show the highest negative temparature and the lowest positive temperature of that year.
Example: Entry data: -4 -6 0 5 10 20 24 25 17 8 -1 -7 exit data : max negative= -1 and min positive= 5 "
View 11 Replies
View Related
Sep 20, 2013
I have to read data from a text file, load it into an array and then bubble sort it! Here is my code:
Code:
#include <iostream>
#include <string>
#include <fstream>
[Code]....
Basically what i am trying to do is that sort the names of 10,000 movies and then write those names to a text file. It gives an error in the nested loop by underlining arr and tells that no suitable conversion function from std::string to const char* exists.
View 5 Replies
View Related
Feb 12, 2015
Write a program that creates and displays a table of temperature conversions. Get the starting temperature from the keyboard in degrees Celsius (do not allow input of a value below absolute zero). Also get an integer value to represent the number of degrees to increment for each of a 20 row table (do not allow the increment value to be less than one. The first column will be a row number starting with one, follow by the Celsius value and then the conversions into Fahrenheit, Kelvin, and Rankine. Be sure that all columns are neatly right aligned for a variety of inputs.
Thats what i wrote so far:
#include <iostream>
#include <iomanip>
using namespace std;
int main() {
double C,F,K,R,n,a;
cout <<"Enter starting temperature in Celsius: ";
cin >> C;
[Code] ....
Thats what the instructor looking for:
Enter starting temperature in Celsius: -500
ERROR: Temp must be >= -273.15: -273.15
Enter increments in degrees Celsius: 100
# Cels Fahr Kelv Rank
1 -273.15 -459.67 0.00 0.00
2 -173.15 -279.67 100.00 180.00
3 -73.15 -99.67 200.00 360.00
4 26.85 80.33 300.00 540.00
5 126.85 260.33 400.00 720.00
6 226.85 440.33 500.00 900.00
7 326.85 620.33 600.00 1080.00
8 426.85 800.33 700.00 1260.00
9 526.85 980.33 800.00 1440.00
10 626.85 1160.33 900.00 1620.00
11 726.85 1340.33 1000.00 1800.00
12 826.85 1520.33 1100.00 1980.00
13 926.85 1700.33 1200.00 2160.00
14 1026.85 1880.33 1300.00 2340.00
15 1126.85 2060.33 1400.00 2520.00
16 1226.85 2240.33 1500.00 2700.00
17 1326.85 2420.33 1600.00 2880.00
18 1426.85 2600.33 1700.00 3060.00
19 1526.85 2780.33 1800.00 3240.00
20 1626.85 2960.33 1900.00 3420.00
Press any key to continue . . .
My question is to know how to make the sequence from 1 to 20 and whats the best statement for increment...
View 2 Replies
View Related
Oct 29, 2013
I have to sort golfers using bubble sort. Here my code:
#include <iostream>
#include <cstdio>
#include <fstream>
#include <string>
#include <cstring>
using namespace std;
void tellUser();
double calcAvg( int, int, int, int, int &);
void swap( int &num1, int &num2);
[Code] ....
View 2 Replies
View Related
Jun 21, 2013
i'm new to C++ i came across this bubblesort program earlier relating to class templates i was wondering how to make this into simple function templates
#include<iostream>
#include<iomanip.h>
#include<conio.h>
#include<stdio.h>
using namespace std;
template <class t>
class bubble
[Code] ....
View 3 Replies
View Related
May 15, 2014
I'll make a program that consists of "sorting and searching." To cope with the task, it should contain this: Create a field containing 50 random numbers, sort them by a method sort according to Bubble sort and then out the field before and after sorting. [URL]
View 1 Replies
View Related
May 8, 2014
I'm really struggling with bubble sorting a classed array(an inventory). I understand bubble sorting in theory and implementing it into a static array makes sense. When I get to doing it in a classed array then I struggle. I need to sort the weight by bubble sort (then selection sort for name, and insertion sort the cost; but I want to tackle one problem at a time.
Here is the code:
#include <iostream>
#include <iomanip>
#include <conio.h>
#include "Inventory.h"
#define MAX_REC 10
using namespace std;
//Class to hold inventory variables/funcitons
[Code] ......
View 6 Replies
View Related
Feb 3, 2013
i wanted to sort an array with double bubble sort but it didnt work!
my code is this:
void doubleBubbleSort(int *array, int length) {
int i,j;
for(i=0; i<length--;i++) {
if(array[i]>array[i++])
for(j=i;j>=0&&(array[j]>array[j++]);j--)
std::swap(i,j);
[code].....
how to get time like 1.56 seconds,too!
View 3 Replies
View Related
Apr 20, 2014
I'm writing the program below to take an integer input for temperature and display a cheesy message for different ranges for each day of the week.
I tried using two if statements, the first to determine if the input is valid, and the else display that it was invalid and to try again.
The second set of if (if else) statements would evaluate a number input and display the cheesy message based on the value, or if it was out of range, to make you re input that days temperature.
I understand that the else statement is linked to the closest if statement, unless brackets are added to prevent this. I thought my brackets were correct, but I keep getting [Error]'else' without previous if'. The red lines are the if and else statement I'd like to be linked, and tried to do so by enclosing the 2nd if statement in brackets.
The assignment doesn't require the error checking, but if I don't use some form of it I believe it will just loop. Again I have to use the last 4 lines due to instructors rules, and have to use scanf and not strings or arrays.
This program will ask the user what the temperature will be for each day of the week. The integer input from the keyboard will be tested in a series of IF tests and a message will be printed depending on the temperature.
Code] ....
#include <stdio.h>
#define MAX 100
#define MIN 0
int main() {
int day = 1;
int temp;
[Code] ....
View 10 Replies
View Related
Nov 18, 2014
I'd like to modify this code so that there is 1000 numbers instead of 100, and that they're sorted in ascending order instead of descending order.
#include <iostream>
#include <cstdlib>
#include <ctime>
using namespace std;
double* sort_array(double* sort) {
for (int a=1; a<100; a++) {
[code]....
View 2 Replies
View Related
May 4, 2014
This program using the selection, insertion, and bubble sorts. The program needs to be able to do the following:
1. Create an array of 1000 population records when the array object is instantiated. Call it unSorted.
2.Open the file called "Population.csv" (on the portal) and invoke a function that loads the population data into the array.
3.Create a second array of 1000 elements that will be used to sort the data using the different algorithms. Name is sortedArray.
4.Write a function that will copy unSorted into sortedArray and execute that function.
5.Using a function, display the unsorted array.
6.Invoke the insertionSort () function that will sort the sortedArray using the insertion sort algorithm. Sort the population data on the rank field in ascending order. Alternatively, you can sort in descending order on population.
7.Using the display function, display sortedArray.
8.Display the number of iterations it took to do the sort using this algorithm.
9.Repeat steps 4-8 for the selection and bubble sort algorithms.
Here is my code so far:
Code:
#include <iostream>
#include <iomanip>
#include <fstream>
using namespace std;
void loadArray (int unSorted[], int s);
void displayArray (const int num [], int size);
[Code] .....
Here is a few lines from the Population.csv file contents:
Code:
Alabama,Baldwin County,140415,389
Alabama,Blount County,51024,908
Alabama,Calhoun County,112249,477
Alabama,Colbert County,54984,858
Alabama,Cullman County,77483,653
Alabama,Dale County,49129,927
Alabama,Dallas County,46365,974
Alabama,DeKalb County,64452,753
I'm not sure how to load the data from the file into the array properly, I attempted this. I also don't know how to copy the unSorted into sortedArray.
View 14 Replies
View Related
Feb 19, 2014
Well still working on my project, now the bubble sorting failed. For some reason the first slot in the array is empty and when I attempt to enter a record to access, it just crashes or prints a blank record. Here is my code for the viewing of the record and a SS of the empty array slot.
Code:
void searchRec(void) {
void Printing(int *ver, int *max);
FILE *fPtr;
struct Students vStudnt;
int set;
int ver;
int i = 0;
int fin = 0;
int sel;
char order;
[Code]...
Well I don't see why there is a empty slot, why?
View 6 Replies
View Related
Feb 25, 2014
I am writing some code to bubble sort a list of randoms numbers, 10 at the moment. I want to be able to user input the amount of elements that would be sorted. I think i'd have to use vector instead of arrays, but unsure how to do this. Or, how to be able to change the size of the array.
#include <iostream>
using namespace std;
#define SIZE 10
float numbers[SIZE];
int move_n;
[Code] ....
View 1 Replies
View Related
Jun 26, 2013
This program is sorting a randomized array of integers using the bubblesort algorithm.
I am trying to modify n correct the source code,so that the swapping of two values will be done by a function called swap values() by using call-by-reference but function should have as arguments only the two array elements that must be exchanged. (Note: do not pass the whole array to the function!) .We consider an array with the first element containing the number of elements in the array, followed by 10 randomly initialized integers (elements).
The code must sort the 10 elements in ascending order.
Compile: g++ -Wall sorting.cpp -o sorting
*/
#include <iostream>
#include <stdlib.h>
using namespace std;
int main() {
const int SIZE=10;
[Code] .....
View 1 Replies
View Related
Feb 1, 2015
I am relatively new to C++ and am trying to bubble sort my linked list that creates 100 random integers. Everything works, but I am unsure how to continue this to include a bubble sorting method.
#include "stdafx.h"
#include <iostream>
using namespace std;
class Node{
public:
int data; //set data
[Code] ....
View 1 Replies
View Related
Jan 16, 2013
I have to write a program for a restaurant and their food has to be cooked on a hot sheet of metal and too cook their burgers properly I must keep a maintain temp of 400 F, for the grill and to measure the temperature using a probe at 12 points, there are 3 elements with 3 points on them
View 2 Replies
View Related
Feb 16, 2013
I have a code able to import a file containing words and numbers to a linked list, but I also need to sort this linked list alphabetically. I've done research on this involving bubble sorting, but no explanationcan achieve this objective.
Below is the code that can only put the file into linked list:
Code:
#include<iostream>
#include<conio.h>
#include"U:C++WordClass2WordClass2WordClass.cpp"
#include<fstream>
#include<vector>
#include<string>
using namespace std;
[Code] .....
View 5 Replies
View Related
Oct 29, 2014
I am trying to write a program which will sort an array of numbers into ascending order, here is my code
#include<iostream>
#include<cmath>
using namespace std;
int main(){
int array[]={1, 5, 17, 3, 75, 4, 4, 23, 5, 12, 34, 34, 805, 345, 435, 234, 6, 47, 4, 9, 0, 56, 32, 78};
[Code] .....
This compiles fine but when I run the .exe for the first time an error message comes up saying program has stopped working. If I run the program again without recompiling it seems to work as expected.
View 2 Replies
View Related
Oct 29, 2014
For my program i need to sort my int numbers [5] from highest to lowest but it seems that i made it go from lowest to highest ...
Code:
#include <iostream>
using namespace std;
int main() {
int numbers[5] = {3, -6, 10, 1, 130};
int counter1, counter2, tempNum;
//Highest to Lowest
[Code] ....
View 1 Replies
View Related
Mar 26, 2014
I'm trying to make a c++ program of this but i don't know how to use the bubble sorting.
Write a C++ application that asks the user to enter 10 numbers. The program then stores those numbers in an Array. The program should display the Mean , Median, and Mode.
Mean is the average of the 10 numbers.
Median is the average of the 5th and the 6th numbers. (But you have to arrange the numbers in ascending order first using Bubble Sort before calculating the Median.)
Mode is the most frequent number among the 10 numbers.
View 5 Replies
View Related
Nov 21, 2014
I need to sort the Linked list from highest to lowest or in this case. The highest Bribe gets the higher priority on the list. I have looked all over the internet and have found some pretty decent examples but I still don't truly understand how to sort it. I think from looking at so many examples I have confused myself even more. I was reading about using Doubly Linked list but I don't even know if were allowed to use that.
1. The program runs perfectly at the moment. It prints out the list but does not sort it.
2. How to make sure that I am deleting the allocated memory correctly in the deconstructor.
Header File
#include <iostream>
#ifndef PERSON_H
#define PERSON_H
struct PersonRec;
class PersonList {
[Code] .....
View 6 Replies
View Related
Jun 8, 2014
I am doing a modification to a school project call rainfall statistics. I have that written, but need to sort the array and list rainfall totals from highest to lowest. I thought I knew what I was doing but I am having some difficulty locating all my errors, the error I keep getting now is:
1>------ Build started: Project: Rainfall Statistics Program, Configuration: Debug Win32 ------
1> Rainfall-main.cpp
1>Rainfall-main.cpp(88): error C2601: 'sortHighest2Lowest' : local function definitions are illegal
1> Rainfall-main.cpp(25): this line contains a '{' which has not yet been matched
1>Rainfall-main.cpp(96): error C2065: 'TOTAL_NUM_OF_MONTHS' : undeclared identifier
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
Below is my code, I know i'm missing something, just can't see it.
#include <iostream>
#include <iomanip>
#include <string>
using namespace std;
//Here are the function prototypes
double getTotalRainfall(double[], int);
double getAverageRainfall(double[], int);
[Code] .....
View 2 Replies
View Related
Jul 6, 2013
I am writing a function called swap that sorts the elements of an array in order from highest to lowest values where they descend and ascend. A particular thing about this function is that swap does NOT re-arrange elements in the array so it just uses a second array of indexes for the elements in the original array and then swap sorts the second array based on the values in the original array. A sorted version of the original array can then be produced with these sorted indexes. You can declare and initialize the original array without any user input.
For example, int arr[10] = {1, 5, 22, 14, 6, -5, 7, 9, 12, 15 };
Header of the function swap must be as shown below: void swap(int array[],int swapedIndexes [], int size, char mode) When mode is 'a', the function sorts the array in the ascending order, and when mode is 'd', the function sorts it in the descending order. int swappedIndexes[5];swap(array,swappedInde… 5, 'a');
So far I have this code that randomly generates arrays of 10 elements and I found the max and min, but I am confused on what to do about the swapping part? Also, how to make the numbers ascend or descend in numerical order?? Here is what i have done so far:
#include<ctime>
#include <iostream>
using namespace std;
int min(int [],int);
void max(int [],int , int &);
void main()
{ srand(time(0));
//1-declare
[Code] .....
View 1 Replies
View Related
Aug 14, 2012
i wnt to display student who get highest marks among them...i have code for finding maximum marks from them but don't kne how to print only top 5 student...
Code:
static void Main(string[] args)
{
Console.WriteLine("Please Enter Number of Students :");
int n = Convert.ToInt32(Console.ReadLine());
StudentDetails[] student = new StudentDetails[n];
for (int row = 0; row < n; row++)
{
Console.WriteLine("Please Enter Student name :");
[Code]...
(dis code in Visual Studio)
View 6 Replies
View Related
