this program is just to give the size and value of the array by the user.
Code:
#include <stdio.h>
main( ) {
int size ;
scanf ( "%d", &size ) ;
int arr[size] ;
for ( i = 1 ; i <= size ; i++ ) {
scanf ( "%d", arr[i] ) ;
printf ( "%d", arr[i] ) ;
}
error : Code:
C:UsersDocumentsprog est.c:7: parse error before `int'
I get the following parsing error for the code
Code:
#include <stdio.h>
int main()
{
int i=3,4;
printf("%d",i);
return 0;
}
what is wrong with the code? I have put initialize value as 3,4 just to understand what value does i gets assigned.
im trying to read employee information from a file using structures but im having problems with getting the file to open and read in the information
Code:
Write a programt that inputs (at most 50) records from a sequential file
#include <stdio.h>
#include <stdlib.h>
struct employee // employee structure definition
}
[code]....
I have a 3-dimensional matrix(3,3,3) and want to write it to a file. I have the code for parsing it in a compatible for matlab format. But at this point i want to use a pointer to do the same thing.
Code:
#include <stdio.h>
#include <stdlib.h>
int main() {
const int dimx = 3, dimy = 3;
int i, j;
unsigned char a[3][3][3] = {
[Code]...
If it is a 1-dimensional array i can understand the logic.
Code:
int val[7] = { 11, 22, 33, 44, 55, 66, 77 } ;
int *p;
p = val[0];
for ( int i = 0 ; i <= 6 ; i++ )
[Code]...
I am doing a project processing emails in EML format. I searched for a library doing eml file parsing and got no hits. I really dont want to code the parser myself. I just want to get the project done with minimize cost. Which library should I use?
View 4 Replies View RelatedSuppose i have a text file with ":" as delimiter, how to i find the average value of each column? For e.g. First column will be (3+2+5)/3 and second column will be (61+87)/2 for the third column.
Sample text file
================
3:290:61:100:
2:50:
5:346:87:
I have tried using getline in while loop, but it seemed more complicated because i think it requires much more than that.
I am using TinyXML 2 for the data of my RPG game, I am almost done with the tilemap parsing system, but I just couldn't figure out how to extract csv data that I have in my XML file, like this:
<data encoding="csv">
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,9,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
[code]....
What I want to do is to extract this data using TinyXML 2 and to put the data into a 2D vector...how can I do that?
I am trying to parse a text file that contains information and i cant seem to get started. For example, the text file looks like this:
idx=929392, pl= 12, name= someperson
age=19
state=ma
status=n/a
idx=929393, pl= 12, name= someperson2
age=20
state=ma
status=n/a
idx=929394, pl= 12, name= someperson3
age=21
state=ma
status=n/a
I want to parse the name and age into another text file like this format:
someperson 19
someperson 20
someperson 21
possibly include other attributes next to the age like idx?
I have this project for school where I basically need to write a program that will take any text file and convert it into html code.
string line;
int lineCount = 0;
while (!inFile.eof()) {
getline(inFile, line);
cout << line << endl;
lineCount++;
}
cout << lineCount - 1 << " lines of text read in this file." << endl;
I have this block of code to print each line of the text file into the terminal window and count the number of lines printed. But I don't know how to make it change a single character or set of characters to something else. For example, if a line of text begins with the number "1", I want to be able to change it to "<h1>".
I'm trying to make a program where it reads a text file which contains "blocks" of questions like:
Type: multiple_choice
Question
Num_options: number of options
a) option1
b) option2
c) option3
d) option4
Letter of answer
and
Type: short_answer
Question
Answer text
what I'm trying to do is use parse those blocks and have it get handled by the classes, MultipleChoice and ShortAnswer.
I'm planning on using getline as a virtual function and have an if statement like
"if (string == "multiple choice)
** then get it handled by the MultipleChoice class "
I'm trying to parse the root directory of FAT32 in order to get a dir list in the root folder.
So I need to go over all the directory entries in the root directory and parse them.
My problem is that I don't know when to stop the iteration - How to get the size of the root directory?
I noticed that there is a byte in the boot sector - the number of the entries in the root - but in FAT32 the value is always 0, So how can i get the size of the directory?
Write a program that reads the telephone.dat file and displays its contents on the console. The program should allow the user to add new entries to the file.
I have saved the file into a resource file within visual studio and I am trying to run the code to where the file will be shown when I run the program. I know that the program is running and the file is there because if i misspell the filename it will give me the error message. I don't know how to make the contents of the file display.
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
int main() {
string input;
fstream dataFile;
[code]...
I'm a student. I've complete an exercise where the goal is to parse some user input to output phone numbers using EXACTLY this style (not including the quotes): "1-888-8888".
Some rules that I've set for my parser are,
1) the phone number can be mixed in with other text, e.g. "My number is 38888888" or "1asdfk8888888" and
2) the first number found must be a valid calling code (1-9).
I wanted the parser to be flexible. Is this nesting too deep?
std::string format_phone_num(std::string &s) {
std::string formatted_num = "";
bool call_code_found = false;
short num_count = 0;
for (unsigned int i = 0; i < s.length(); i++)
[code].....
my data are
#saben~123~tvm~999999~local~#
#ach~123~tvm~999999~body~#
#sam~123~tvm~999999~wash~#
#sus~123~tvm~999999~area~#
#sach~123~tvm~999999~local~#
How can I parse an .xml file with just C++ Standard Library?
View 14 Replies View RelatedI have a text file which contains many sentences. I am trying to extract only the numerical values from the string that conatins characters,numbers and white spaces from the file. I want to seperate the characters and numbers into different parts.
for example: the file contains sentances as given below.
I have to go to school for 10min.
You will come here in 15min.
He stayed here for 20min.
from the above sentances, I want to seperate " I have to go to school for " and "10" and put them into two different variables and also 10 should be in integer format.
I am working on a program where I am reading in a text file to be parsed to load data objects into their appropriate classes. I have a class to load in this file and to parse its contents. I am at the point where I would like to include the ability to have both C and C++ style comments in this text file. My current class has a constructor that takes in const std::string for its file name. Upon construction I have a while loop that calls a member function getNextLine() as long as this is true this loader class object then calls parseGui(). All of this works correctly so far. Within the function getNextLine() looks like this:
// ----------------------------------------------------------------------------
// getNextLine()
// Returns True If It Got A Line Of Text (Could Be Blank If It Is All Commented Out Or
// If It Truly Was A Blank Line). False Is Returned When There Is No More Data In The File
bool GuiLoader::getNextLine() {
if ( !_file.readLine( _strLine ) ) {
return false;
[Code] ....
As you can see this getNextLine() method reads in a single line of text and saves it into its member variable which is a std::string. It increments the line number, then a utility function trims out leading and ending white spaces. The next part is where this class calls a member function to remove comments. It is in here where I need to parse the string to look for comments either "//" C++ style line comments or "/* ... */" C style block comments that can span multiple lines. I have tried many different ways to go about doing this, and I am stuck on the C style comments. A note to consider is this: the way this code is designed is reading in a line of text from the file into a string variable and in doing so it is not logical for me to read in the complete file and do a pre-parse scan or analyzer.
This is what I have so far, however there are still cases that this code will fail on
// ----------------------------------------------------------------------------
// removeComments()
void GuiLoader::removeComments() {
const unsigned tokenLength = 1;
static std::string::size_type indexA;
static std::string::size_type indexB;
const std::string commentStartingToken( "/" );
const std::string blockCommentStartingQualifier( "*" );
[Code] .....
An example of where this code will fail is when it encounters a single '/' any where on a line of text as it goes into an infinite loop. I am not sure on how to go about skipping this lonely '/' and advanced the index to look for a possible next '/' that belongs to a '//' or a '/*'. I know that this is sort of trivial, but for some reason or another I am having writers block.
I'm using the Split method to parse line in a csv file. The following code works if there are no commas in the text of my data.
string csvLine;
string[] splitLine;
csvLine = "Jim Borland,1234,Never dreams in code";
splitLine = csvLine.Split(',');
But if I have commas in the some of the text as below I get then wrong output. So I need split on a commas which are not enclosed in double quotes.
string csvLine;
string[] splitLine;
csvLine = ""Jim,C,Borland",1234,"Never dreams in code"";
splitLine = csvLine.Split(',');
The output I want is:
Jim,C,Borland
1234
Never dreams in code
I found this :
If your strings are all well-formed it is possible with the following regular expression:
String[] res = str.split(",(?=([^"]|"[^"]*")*$)");
The expression ensures that a split occurs only at commas which are followed by an even (or zero) number of quotes ... and thus not inside such quotes).
Nevertheless, it may be easier to use a simple non-regex parser.
But the .split gives me an error and .Split doesn't work either.
So when I create the EF and use generate model from the database, I included the sensitive info into the connection string. Now I want to get the user to input password, userID, schema name, host into the connection string. I use Oracle as my database, so there is a need to put the schema name in it also.... How do I accomplish this task? Been trying to get it work but unsuccessful so far...
View 3 Replies View RelatedI am working on a project were I have to read line form ( PLC ) programmable logic controller generated text file with lines like this
Circuit Value Current 2.33 4.32 5.55
there could be up to 3000 lines per txt file
I am using string stream to parse the line, for the sake of good programming I which to check weather first three values are string and last three values are actually floats raise or throw an exception if they are not ....
I am working on a quadcoppter and am having trouble trying to parse the output that I am getting from the sensor. This is the code that I am trying to get to work but the Arduino compiler is saying that i can't convert and int to a string unfortunatley I am trying to get the string to convert to an int.
Code:
//string that will be processed is this
//Ax=-209 Ay=5 Az=1116 | Gx=7 Gy=0 Gz=7 | -31 233 -433 Headings 100.20
void setup() {
[Code].....
I'm writing a program that needs to parse executable files. I've got an "executable" base-class, and currently an "elf" class which inherits from it for parsing ELF files, and I will add more parsers (COM, MZ, PE, a.out, MACH-O, whatever) later on.
I want the program to automatically detect which kind of executable it's loading at runtime. It should be easy because every executable format I'm aware of/plan to support starts with a magic number. But because I can't have the parsers not check the file type (what if I re-use the code?), and I don't want to check each file twice (not just for performance, but also because only the ELF parser should know that ELF files start with "x7fELF", etc.) so I've come up with a pretty lazy solution: just try to parse the file with each known parser and have them throw an exception ("exe_type_error") if they can't parse it. If that exception gets thrown, try the next parser; if not, stop.
The remaining problem is how, at runtime, my program will know what parsers are available. I don't want to hard-code it in the main function; instead, I'd like the parsers to "register" themselves as available. That way, if I decide to go down the route of adding new parsers via dynamic linking, I will only have to add an API for dynamic libraries to register their parser, without recompiling any of the main program's code. I also want to do the same thing for another key part of the program (it's a static executable optimizer; it will run a series of "tests" (e.g. "is xor eax, eax faster than mov eax, 0 on this machine?") and optimizations ("if yes, change all mov eax, 0 to xor eax, eax") and I want to load those at runtime too).
I have a text file with the following format
//MAIN OBJECT
Object = ControlNetwork
Created = 2013-01-28T12:26:17
//FIRST CONTROL POINT OBJECT
Object = ControlPoint
PointId = 1
[Code] ....
I want to get the X and Y coordinates of the each control points from 2 images.
For example, from the above file i want to retrieve such information:
-PointID=1 and point coordinates are 802,725(from image1) and 480,708 (from image2)
-PointID=2 and point coordinates are 317,130(from image1) and 128,116 (from image2)
There can be millions of points in such a text file. So what is the best way to parse these files?
I'm trying to parse, or tokenize strings that follow the program name/command when used command line. I want to use the command followed by a sentence with a period. I know I need to user argv. But how can i parse the command rather than prompting the user for input. The input will be a sentence.
#include <pthread.h>
#include <stdlib.h>
#include <stdio.h>
#include <iostream>
#include <cstdlib>
#include <sched.h>
#define MAX_SIZE 50
using namespace std;
//function prototypes
void *vowels(void*);
void *constants(void*);
[Code] ....
I have a very strange problem with the system() function (on XP).
I have the following code:
Code:
char *text1 = ""A SpaceAction.bat" fred";
char *text2 = ""A SpaceAction.bat" "fred"";
int main(int argc, char *argv[]) {
printf("%s
", text1);
[Code] .....
When I run it where "A Space" is a directory with a space in the name, this is the result:
Code:
"A SpaceAction.bat" fred
F:Test>echo Testing
Testing
"A SpaceAction.bat" "fred"
'A' is not recognized as an internal or external command, operable program or batch file.
It seems that the double quotes round an argument make the parsing of the command fail.
In the assignment we are forbidden to use fscanf(). I have been trying to get this to work, but I've started to realize that I do not have a complete understanding of what strtok() actually does. I'm getting this warning when debugging: "assignment makes integer from pointer without cast."
This warning happens when assigning str to goal and assist, and I think it is because they are, when dereferenced, integers. The code below correctly assigns the name into the correct spot, but leaves nonsense data in the goal and assist arrays.
ex:-7880, -7888 file example: NAME GOALS ASSISTS JOHN 1 2
Code:
void readLinesFromFile( FILE* Ptr, int* goal, int* assist, char** name, int lines ){/*
* Reads lines from files and populates the arrays with the corresponding info.
*/
int index;
char hold[ MAX_LINE ] = { 0 };
char* str = NULL;
[Code] .....
From what I understand about strtok(), it returns a string, and takes in a character array and a key value that tells it when to stop. In the online examples I've seen, they use NULL in the first field. I'm not sure why.
